Urgent: the Office currently has no Office source

Similar Questions

• Error 80070643 Windows Update the 13 April 2010. Seems to be the update to the office only.

  The Windows update 04/13/2010, problems since then it never ends the Office updates. Download KBN 981715/981433/980470,980729 start install and error 80070643. Whenever I start a component Office, then it goes to the Windows Installer box takes 15-30 seconds before you start. Also if I start Outlook, same thing then when I email even Windows Installer box.  Tried to restore, only goes so far after this update, I have dealt with this during more than a week and have tried to install a variety of way with no luck.  I don't read a thread here on the 'Office Source Engine (OSE) service"made sure to start which then tried update again once no good same error.  Any suggestion would be appreciated.

  Ed

  On the first screen, select select other options.  It will then bring up a screen showing only the last 5 days of restore points (with a box at the bottom left away from check to display more than 5 days of restore points).  It's the same in all versions of Vista.  I don't understand why you didn't him are not see unless you have not more than 5 days old restore points (but I think that it would always show the box and the option anyway).  Try to run the system restore disk instead of from the computer to see if it works better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• That errro again... host currently has no error management network redundancy

  I don't get the "host currently has no error management network redundancy.

  I think that I have the correct configuration, but not sure since our network guys gave me the IP addresses to use for HA.

  Here is the config for HA

  ESX Server 6.

  Service console is on 0 to 172.16.1.106 in 255.255.0.0 vSwitch

  The second redundancy console) is on vSwitch 4 to 77.77.77.10 in 255.255.255.0.

  ESX Server 5.

  Service console is on vSwitch 4 to 172.16.1.105 in 255.255.0.0

  The second redundancy console) is on vSwitch 4 to 77.77.77.9 in 255.255.255.0.

  I've reconfigured HA on ESX Server 6 and ESX Server 5 and even restarted them but still not the mistake of redundancy...

  Something is not properly configured?

  stanj wrote:

  If the collection of network adapters offer the same functions of redundancy, so why so many articles point to using a second console HA redundancy?

  It's simply the options given. There are several ways to provide a redundancy of HA heartbeat.

  The article also indicates HA advanced features such as das.isolationaddress2 and das.failuredetectiontime will be charged when you set up a secondary service console. It is an approach more effective, but still more complicated?

  These advanced options are not always available and also provide another way to configure HA redunancy.

  Here's something interesting to look at as well

  http://www.yellow-bricks.com/VMware-high-availability-deepdiv/

  For me, I always learned the KISS method (Keep it Simple stupid).  Add a second NETWORK card is the easiest way to keep your redundant environment, in my opinion

• This office currently has no sources of funds available.

  I'll implement VMware View 4 for the first time.  I created my first try of VM successfully and can connect via VMware View Client with the admin that was created between account.  Now I want to connect to it as a user and when I do, I get the following error message.

  "This Office currently has no sources of funds available.  Please, try to connect to this desktop computer later, or contact your system administrator. »

  What Miss me?

  Thanks in advance for your help.

  The pool is persistent? If so, if you logged in once with a single user and try to connect as another, it won't work. The first user is related to the virtual machine, assuming that you only have one configured virtual computer.

• the office jet pro 8610 has memory to recover documents printers before?

  I'm trying to recover a document that I have printed a few days ago and I can't find it on my pc. The office pro 8610 has a memory that I can go back a reprint of you try the document?

  Hi @bj11,

  Welcome to the HP Forums!

  I see you are trying to reproduce a document for a few days there with your HP Officejet pro 8610. I'm happy to help you!

  According to the user's Guideof this printer, the printer does not store documents already printed in its memory. The only way to recover an already printed document must be made on the computer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• my creative cloud icon has disappeared from the office, it is not in my applications folder. How can I get that back?

  my creative cloud icon has disappeared from the office, it is not in my applications folder. How can I get that back?

  Hello

  Please try to re - download applications.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Concerning

• My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

  Hello

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

  For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  You can also see: -.

  https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Manager of photos for the Office Windows has disappeared

  Photos for the Office Manager Windows disappeared, since I signed up for a free trial of microsoft publisher 2010.  My free trial is over and now my picture Manager is missing.  Where it's going and how do I get it back?

  Well, this is what I'm talking about!  I guess I can do it this way, but it ticks me off that I can't get it back as it was...  I like to use this program to resize my photos for use on fb profiles and other.

  Thanks for your help.  not sure how I can get the viewer publisher on there that is?  What can I system restore to yesterday?

• Why are the toggle javascript addons failed to install on FF17 for android, but OK for the Office of FF17?

  I tried different mobile versions nojs, noscript & quickjs addons so I can have a button for the toggle make it easy as on the desktop. Install it fails stating that they are not compatible with FF17. so why the versions of office work with the Office of FF17?

  The error is legitimate? I have the Android 4.2 jellybean in the iconic A700 of Acer which is just an A500 with a resolution of 1920 x 1080.

  Yes Firefox Android is for mobile devices from phones or tablets. The mobile named link was a legacy link for when the mobile Firefox was at version 10.0. * and earlier than these versions were the old version of 'XUL' of Firefox Mobile. Mobile starting with Firefox 14.0 and newer (the 11.0, 12.0, 13.0 were beta versions) the UI is now built with the infrastructure of Android user interface rather than the cross-platform XUL framework so the extensions need to be updated.

  mbrubeck filed some bugs to replace the mobile link with the android link in other Applications menu after that I talked to him as he has been neglected. To read the Bug #824314 and Bug #825048

  Android (2.2 +) is currently the only mobile what OS Mozilla offers Firefox at the time anyway.

• G7 - 2233cl: 8.1 to Windows at startup in the office and I would like it to start in the start screen

  At the start, and after I entered my user name and password, the computer opens the office. I would have rather it would open to the SPLASH screen instead of the desktop computer.  I, m new in 8.1 for Windows so if someone could explain to me how to change this setting any share on the computer I would appreciate it.  Please, be specific and do not assume that I know nothing Windows 8.1 because as I said above I am brand new to it.

  My 1st time using this forum, so I couldn't even post that to the good advice - hope that is not the case :-(

  Thank you

  Hi there @8dakota8,.

  Thank you for visiting the Forums HP's Support and welcome!

  I read your post on the Forums of HP Support and see that you are new to Windows 8.1 and the HP's Support Forums. Please use the Forums from the HP Support, if ever you have any questions or concerns. We are always here to help!

  You mentioned that you would like to know how to start from the start, instead of your desktop computer screen.

  I found the instructions for you on how to move the Office to start instead. I quoted them here for you.

  Source: choose where to go when you connect

  First, open Taskbar Properties tasks and Navigation by hitting on any fly in the right edge of the screen, type search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on search), enter in 'taskbar ' in the search box then touching or clicking the taskbar and Navigation in the results.

  

  To start at the beginning:

  Press or click the Navigation tab

  Clear the checkbox "go to the office instead of start... ».

  Click on apply

  Click OK.

  Restart your laptop and make sure that you see the start instead of the desktop computer screen.

  I hope this has helped! Please let me know if that solves the problem by marking this post as an acceptable Solution.

  Have a great day!

• Question of hard drive on the Office of Firebird 802

  I have a 3 year old office of Firebird 802 which is supposed to have 500 GB hard disk, but what I see is:

  222 GB for drive c.

  and

  232 GB for drive E

  and

  10 GB for the factory image

  The C drive is almost full and despite the elimination of a number of programs recently rest between 4-7 GB close to being full.  I haven't added anything else that the free space has been fluctuating for some reason any.

  What I was asking is how to use drive E or it will automatically put things out there for me that do not fit on the C drive?

  I'm not real familiar with HP products as this has been my first HP computer and I don't know if I can change the video card myself on these models with something better, or if the video card that is currently in it is that I'm stuck with forever. Inside is a Nvidia nForce 760i SLI.

  Hello

  The 500 GB is bytes raw and once formatted it will end with what you said.

  Download Windirstat and see if you can determine which fills up your PC.

  You should be able to move the data to the E drive.

  What operating system do you use?  If you are running Windows 7 so that you can move a certain number of "my" folders type for drive E.  Review of this article if you are running Windows 7.  I moved "MY" pictures, videos, downloads, music, Favorites, documents on disk 'E' using this approach.

  What is the number of product for your Firebird?  You can have video cards dual SLI mode which is very rare for the HP PC.

• I downloaded the Office Professional 60 day trial, this worked well. my trial is over and I would like to remove the software from my laptop but can not...

  I downloaded the Office Professional 60 day trial, this worked well. my trial is over now and I want to remove the software from my laptop, I tried to do it via Add/Remove programs in the control panel, but get the message "installation of the product has been damaged. Run Setup again from the original cd/dvd or other source of installation '. I looked for an hour on the Microsoft Web site to help but can't find... Please someone he can offer advice?... Thank you

  http://support.Microsoft.com/kb/928218

  "How to uninstall manually Office system 2007 if you cannot uninstall it by using the function" Add / Remove programs.

  Read and follow parts of the XP of the info on the link above to Ms.

  See you soon. Mick Murphy - Microsoft partner

• I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  Hi Clayton,.

  This means that some services has tried to open a connection & couldn't, possibly IPv4 vs IPv6 or iCloud/back to my Mac.

  Mifgt try the helpful message here...

  Name of my iMac computer continues to change automatically after Yosemite upgraded

• Where do you find the Office of restoration?

  My computer sometimes freezes restarts, but it is up to the screen saver and only put up the office. I have nothing to make the bar office and down appear, so I have to stop and start again. It is a real pain.

  Open the task (Ctrl + Shift + ESC) Manager.
  Check in the processes tab, if you see the Explorer.exe process and if necessary, select end process to kill the current process to explore.
  Start a new explorer.exe process through "file > new task" for the job and work the taskbar to return.