This office currently has no sources of funds available.

Similar Questions

• Urgent: the Office currently has no Office source

  Even if I know there are great. post floating already during the same question, but I'm no luck so far.

  I get the following error message when you try to connect desktop by customer to vmware view 4:

  "the Office currently has no office source...". "

  My setup is listed below:

  1 using the view Manager server on VM case.

  2. properly deployed 10 desktop VM view manager and they are in persistent mode.

  3. before a few users were able to coonect to these desktops with success

  4. under Fund sources, I get "User ID field domain\username" and under his watch 'Ready' status

  Then when another user who is authenticated trying to access funds get above error message mentioned.

  Other users are unique one who previously never connected.

  Help, please.

  Well, it's a different problem. So what you're saying, is that you have 10 desktop computers, 10 users connect and can reconnect, but no new users can?

• All sources of funds available for this desktop computer are currently busy

  We do a pilot project on several thin clients. The problem is that we have 7 devices Windows Embeded WYSE, they work wonderfully. But we also 3 thin OS devices from WYSE V10L. When a user is already connected to a desktop computer and they're trying to connect to a client device light they receive an error "all sources of funds available for this desktop computer are currently busy. This only the first time happnes, they hit enter while the desktop is unplugged. If they hit enter once again that they are able to connect directly. My question is there a way to solve this problem, the user is never a mistake or if it can wait one second for the disconnection or something. Any help would be appreciated.

  Thank you

  Tom Bryan

  Yes, it would be at the level of the customer. That allows them to reset everything.

  And thanks for letting me know the individual Office thing too. If you can switch on desktop clone linked at some point it would make maintenance much easier as well!

  Mike

• "This host currently has no management network redundancy", but there are?

  While in vcenter, the summary for a host tab displays this message:

  "This host currently has no management network redundancy.

  I have attached photos of the host > Configuration > network and host > Configuration > network cards pages. It seems to me that the management network is behind 2 NIC's team together.

  What I am doing wrong? How can I fix?

  Thank you

  More than an idea. Righ click hosts and run "reconfigure for HA.

  André

• TouchSmart 610 1130 i5 23 "Can someone please let me have further details on what this office has?

  Hello

  This is my first post. I am interested in buying a Touchsmart 610 1130 i5 23 "Can someone please let me have further details on what this office has as the details on the specifications do not tell me anything. I would like to know things like: if it has built-in webcam, speaker, HMDI? the usb ports how etc. etc.etc.

  Concerning

  sjbis11

  Hello sjbis11,

  Is the TouchSmart 610 you are looking at a model 1130uk. If so, here is a link to a plug detailed for this model.

  http://support.HP.com/us-en/document/c02883538

• [39008] logical dimension table has a source that is not everything

  Dear reader,
  
  After deleting a table of facts of my physical layer and remove my business model, I get an error: [39008] logical dimension table TABLE X has a source which does not join any source made the TABLE X. I have another table of facts in the same physical model and the same business model that is attached to the ARRAY X in the physical and the business model.
  
  I can't understand why I get this error, even after the removal of all joins and rebuild joins I get this error. When I look in the 'Manager of Knuckles' these joins in logical but also physical model exist, but with consistency check, it warns me of a bond [39008]. When I ignore the warning and go to the answers and try to show the TABLE X (not done, but dim) it gives me the following error.
  
  ODBC driver returned an error (SQLExecDirectW).
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 14026] Unable to navigate the requested term: TABLE X.column X correct metadata consistency warnings. (HY000)
  Publ. SQL: SELECT the 'subject FROM saw_0' X X.column TABLE ORDER BY saw_0
  
  There is a * 'special' * thing about this join. It is a complex join in the physical layer, because I have to make one between the dates and a smaller or equal to the current date as this example of dim.date between fact.date_begin and fact.date_end and dim.date < = current_date. In the business model, I had an another complex join
  
  Any help is appreciated kindly!

  Hello
  Did you indicate the level of content of the fact table and mapped it with the dimension in question? Ideally this should be done by default since one of the main features of the Oracle BI is its ability to determine which source to use and the specification content level is one of the main ways to do this.

  One other quick thing you can try is to create a dimension (hierarchy) where it is not already present. I had a similar problem a few days back and the warning had miraculously disappeared by doing this.

  Concerning

• Office Starter has stopped working

  This morning, after an undate to my computer at night (11/09/13), Microsoft Office Starter has stopped working. The icons for the changed document in generic (orange in colour) instead of word or Excel documents. When attempting to open a word document, a screen wanting me to buy Office.  All of the suggestions.

  Computer is a HP h8 - 1287c with Windows 7,

  Microsoft - link - how to repair Office Starter

  http://support.HP.com/us-en/document/c02981221

• all office stuff has disappeared

  all office stuff has disappeared. The only way I can access anything whatsoever is in the Task Manager using the CTRL, alt, del function. How can I get my info desk and return functions?

  Hello Classie14u,

  Thanks for your post.  Have you tried restarting your computer?  It could be that the explorer.exe process was canceled somehow.  Try the following:

  CTRL - Alt - Del

  Click file > click New task > Type explorer.exe

  This is to restore your desktop?  We can't wait to hear back on your part.

  See you soon

• The Task Manager currently has two active users in the console session, but I am the only user.

  Task Manager

  my task manager currently has two active users in the console session. I am the only user of the computer and when clicking on USERS it always shows only one user. What or OMGE could be the cause.

  Hello

  Open the Task Manager->, click on users-> right click on another user who isn't currently active and choose log off.

  This can occur when the user account is not properly disconnected.

  I hope this helps.

• Whenever I get close Microsoft Word, it displays a window saying that Microsoft Office Word has stopped working?

  All the documents that I close (if it is registered or not, whether it is empty or not) shows an error message saying:

  Window with the loading bar appears: header 1 - "ofMicrosoft Office Word has stopped working ", heading 2 - "Windows is checking for a solution to the problem... " "

  Changes in wording (remains of load bar): header 1 - "Microsoft Office Word to try to recover your information... ", header 2-"it can take several minutes. "

  It takes then about 10 to 20 seconds until the charge bar disappears and the text becomes: header 1 - "Microsoft Office Word has stopped working ", header 2-"a problem caused the program to stop working correctly." ""  Windows will notify you if a solution is available. "

  This process happens every time.  Sometimes it restarts the program, and other times it ends just (closed) it.  I don't know if this is related to this bug, but I met another problem that began at the same time as this one:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/f5e2a747-b429-4d55-8a6b-5d5a9b791dd1 (scroll to the bottom of the page of my post) .  That error is fixed now, but the "Microsoft Office Word has stopped working bug" continues to annoy me.

  Could this error be caused by my computer or Microsoft Word?  Does anyone have any information or conclusions of how this error can be fixed?  Is there some registry tweaks which can solve this problem?

  Specifications of the computer:

  Windows Vista Edition Home Premium Service Pack 2 (32-bit)
  Pentium Dual-Core CPU T4200
  RAM is 3.00 GB if it is of no use
  Microsoft Office Word 2007
  Computer is up to date on all updates, including Microsoft Office

  Thank you in advance!

  ~ G33KG1RL ~.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• My Acer Aspire One with Microsoft Office Windows 7 gives gives thefollowing error message "Microsoft Office Word has stopped working".

  My Acer Aspire One with Microsoft Office Windows 7 gimme gimme thefollowing error message "Microsoft Office Word has stopped working" is followed by "Windows is checking for a solution to the problem," then to "Windows try to recoverthe information" sometimes, he is able to recover and sometimes not. This can happen several times within 5-10 min.

  I'm almost illiterate with these things.

  Any help

  Thank you

  Original title: error message

  Go to programs-> Microsoft Office-> Office-> Office Diagnostics Tools.

  To test your installation

  You can also control panel-> programs and features. Select Microsoft Office in the list and select Edit in the upper part. The second Dialogue should offer the repair option.

• Try to activate Windows, error: this product key has already been used on another computer

  (Original title: Hi I get this key product and equipment repaired already in use)

  How can I fix? any suggestions please? I can't activate my windows because it says that it has already been used, the cause of this is my equipment got repaired and when he returned he disabled just, please

  I tried to enter my product key for windows, and he just said "this product key has already been used on another computer" but that is the only computer where I installed my Windows 8, I tried the method by which you must contact their office by the number of the machine and you must give them 9 packed numbers and enter this told you on the phone. But I can't contact then given the number of the machine and also I tried to send the technician takes charge, but it did not help, I need help badly please. Thank you.

  Hi Christian,

  I understand that after getting your equipment repaired, you cannot activate Windows 8.

  As the ID of the product gets changed every time the internal components of the machine are modified and when you try to activate Windows it identifies it as a machine to new or different.

  I suggest you contact the support phone or chat for assistance with Windows.

  See the link below for the number of support:

  Global Customer Service phone numbers

  http://Support2.Microsoft.com/GP/customer-service-phone-numbers/en-GB?WA=wsignin1.0

  You want to chat instead, check the link below:

  http://answerdesk.Microsoft.com

  Hope this helps, get back to us if you need further assistance for Windows.

• Windows 7 IE8 are unable to run the App form - an add-on for this Web site has no r

  I have a fine running form application in Window XP, IE 8 browse, using the applet. But the company wishes to upgrade to window 7/IE 8.
  
  The form is constructed of 10g. The side server keep the same. When I use windows 7/IE8 try to reach the application, I got error message "an add-on for this Web site has failed. What Miss me? Security settings? Missing applet? I have seen java console applet on Windows XP/IE7...
  
  Please advise!

  Windows 7 (32-bit) with window IE 9.0.8112

  Ah, which explains a lot. IE 9 is currently not supported. Please see the Information of Certification Client Forms 10.1.2. There are known issues with IE 9. I recommend go back you to IE 8 and wait for IE9 to be certified.

  Craig...

• Coherence WARNING: logical dimension table [39008]... has a source...

  Hi well think for playback.
  
  I have a problem (which is quite common that I saw, but I could find a solution that solves my problem again) with coherence.
  
  My physical layer looks like this:
  
  Table_a
  Table_B
  Table_C
  Table_D
  Table_E
  
  In the business model, I have all of same tables and the following joints in the logical scheme of the Table:
  
  -> Table_B Table_a
  Table_C-> Table_A
  -> Table_A Table_D
  Table_E-> Table_A
  
  The consistency check is delivered two warnings:
  
  Warning
  Source of the logical table
  Table_a
  [39008] logical dimension table Table_A has a source Table_A who do not adhere to any source of fact.
  
  Warning
  Source of the logical table
  Table_B
  [39008] Table_B logical dimension table has a source Table_B who do not adhere to any source of fact.
  
  While working in BI answers, I managed to recover all the data tables C, D, E. But for tables A and B I can retrieve only the columns that are defined in the join Table_A-> Table_B. All other columns to deliver the following error message:
  
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 14026] Unable to navigate the requested term: Table_A.Column_X. correct metadata consistency warnings. (HY000)
  
  If I get one column from Table_A and one from Table_E, I have the following error:
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 15018] Incorrectly source the logical table set (for the fact Table_E table) does not contain a mapping for [Table_B.Column_X]. (HY000)
  (Yes its Table_B not one)
  
  I would like to correct this mistakes but do not know where the problem is hidden.
  
  Any help is appreciated with kindness.
  
  Evgeny

  Table_a >-Table_B
  Table_a >-Table_C
  Table_D >-Table_A
  Table_E >-Table_A

  It's seems that D and E are fact tables joined to a dimension. A has dimensions B and C, this is attached to itself.

  So the only facts are D and E, is that at the time? A is the size?

  D and E joined in A and A are the joints B and C, right?

  Concerning
  Goran
  http://108obiee.blogspot.com

• This Apple ID has been locked for security reasons

  When I try to unlock my iPad I see alert "this identifier Apple has been locked for security reasons. I tried to reset the password, but a don't know the answers to security questions. Also, I select "Receive email" message sent to my e-mail @icloud, but I can not connect to the e-mail account has been blocked for security reasons.

  How to unlock my Apple ID?

  April 2016 King_Penguin post: https://discussions.apple.com/message/30030420#30030420

  If your identifier Apple is locked - https://support.apple.com/HT204106 - "If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID after verifying your identity. »

  Write down the answers to your security questions.  They are like you knowing banking details.

  Normally an iCloud address cannot use the e-mail contact. You've probably used a different one.

  If none of these work, you will need to contact Apple using the information in the articles I linked.