Urgent to solve in Photo

Similar Questions

• Need help urgent to solve the problem.

  Hi all
  I am facing a problem. Cursor can not recover any value but a toad, I see it's ok. I don't identify what the problem is.
  
  Source code:
  
  PROCEDURE proc_reperatory_display (p_attribute_id IN varchar2) IS
  CURSOR rep_cur (v_cur_id VARCHAR2) IS
  Select medicine_id, sum (medicine_Number) as m_no
  OF HP_REPERATORY_CHILD
  WHERE REPERATORY_ID IN (p_attribute_id)
  GROUP BY medicine_id;
  BEGIN
  GO_BLOCK ('REPERATORY_CHILD');
  CLEAR_BLOCK (No_validate);
  Premier_enregistrement;
  / * Loop through the records in the cursor * /.
  FOR rep_rec IN rep_cur (p_attribute_id)
  LOOP
  Create_Record;
  : REPERATORY_CHILD. MEDICINE_ID: is rep_rec. MEDICINE_ID;.
  : REPERATORY_CHILD. MEDICINE_NUMBER: = rep_rec.m_no;
  END LOOP;
  Premier_enregistrement;
  END;
  
  Thank you
  HD

  What to help

  CURSOR rep_cur (v_cur_id VARCHAR2) IS
  Select medicine_id, sum (medicine_Number) as m_no
  OF HP_REPERATORY_CHILD
  WHERE INSTR ("' |") p_attribute_id | » ', ' '|| REPERATORY_ID | (' ') > 0
  GROUP BY medicine_id;

  CONDITION, p_attribute_id is separated by spaces not commas

  Published by: Dora on December 28, 2009 09:08

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• Printer all-in-one HP5640: HP5640 all-in-one prints photos in Windows Live Photo Gallery

  Configuration using mobile device installed printer driver using the supplied print CD. Update driver software. Network printer by wireless to computer & smartphone.

  Been able to print the photo of smartphone, was able to print the Word computer document. Could not print the photo to the computer by using Windows Live Photo Gallery. Used the HP troubleshooter, after all possible solutions without result. Choose the paper option Photo HP but he missed for the tray paper 8 x 11. Can someone please? Thank you!

  Hey @JaneScott,

  Welcome to the Forums of HP Support!

  I understand that you have problems when printing from Windows Live Photo Gallery on your computer Windows 8 to your e-all-in-one printer of HP ENVY 5640, whereas yours continue to letter paper tray size by default. I would like to help you today with this printing problem. Can I please you follow the steps below to correctly configure print settings in the print dialog in Windows Live Photo Gallery.

  1. load your Photo paper in the Photo tray on your printer

  2. open an image you want to print in Windows Live Photo Gallery

  3. click on file and select print

  

  4. in the print dialog window, make sure that your printer, paper size, qualityand Type of paper are all set correctly for your specific print job

  

  5. then, click on the Options button in the lower right. In the print settings dialog box, click on the printer properties.

  

  6. then, change the Paper Source to Tray Photo. If it is currently set to "Main tray" Please click the main tray option and it will fall to allow you to select the Photo tray. Click OK once carried out the change.

  

  • NOTE: If the size of the paper presents an exclamation point, this means that your Photo Tray does not support the selected paper size. Click the drop-down next to the paper size menu and choose a format that does not show an exclamation point.

  

  7. as the main print dialog window, click print at the bottom right

  

  Your document should print according to normal now since the appropriate paper tray.

  Please let me know if the steps solve your photo tray paper print issue. I can't wait to hear strings attached good luck!

• Unable to send photos as attachments (Error 0x800CCC0E)

  original title: still solving emailing photos problem

  I posted the question previously, but did not provide sufficient information. When you try to send pictures to the Photo Gallery of Windows using the provided e-mail option, I get the following message:

  The connection to the server has failed.

  ' Subject to 'Journey to Yosemite', Account: "att.net", Server: "att.net", Protocol: SMTP, Port: 25, secure (SSL): no, Socket Error: 10060, error number: 0x800CCC0E

  I'll send using Windows Mail through Yahoo - if that makes sense. Of course, I am a novice to this.

  Thanks for your help,

  Donnie

  I posted the question previously, but did not provide sufficient information. When you try to send pictures to the Photo Gallery of Windows using the provided e-mail option, I get the following message:

  The connection to the server has failed.

  ' Subject to 'Journey to Yosemite', Account: "att.net", Server: "att.net", Protocol: SMTP, Port: 25, secure (SSL): no, Socket Error: 10060, error number: 0x800CCC0E

  I'll send using Windows Mail through Yahoo - if that makes sense. Of course, I am a novice to this.

  Thanks for your help,

  Donnie

  ==============================
  Do you have Yahoo Mail Plus?

  Perhaps the following links would offer a few ideas:

  Set up Windows Mail to connect to Yahoo Mail Plus
  http://www.vista4beginners.com/Windows-Mail-Yahoo-mail-plus

  Implementation of Yahoo! Mail in Windows Live Mail
  http://www.freeemailtutorials.com/windowsLiveMail/setupEmailAccounts/setupYahooMailAccount.htm

• curve adjustment function does not work

  Hi all

  I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.

  which suggests to me u.

  Thank you

  You have been asked to view the code. We cannot solve the photos.

  Matrices X and Y are same length? Is a NaN value? What the output error say you?

  (Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)

  This discussion is useless until you attach a real VI and data, so please.

• Problem with my workspace

  Unable to

  (1) see my right side panel that displays "layers", "glyphs", "shades", etc...

  (2) use my hand tool to move the work plan according to my needs. Plan of work is currently coming in the right part of the page and I can't seem to bring it into the Center to work on my image.

  Someone pls help me urgent to solve problems.

  P.S.: I already rebooted the PS, laptop

  I've just updated PS too (just in case if it was a problem of non updated)

  Thank you. I tried this (more the option of centered zoom on the region I want to zoom)... None of them seem to work.

  I wish I could show you the image, but my work plan is somehow shifted right and whenever I Zoom in or out, or move the position of the artboard, nothing happens. It remains fized

  Thanks for your suggestions so.

• Local data store has disappeared from the data store window (necessary emergency aid)

  Dear team,

  I m facing a very strange problem, all of a sudden one of the local ESX datastore disappeared thereafter are full details we have encountered/noticed.

  A local data store disappeared from the data store window.able to see this data store to add storage Wizard, which allows us to format the same.

  * If we take a session putty from here we can see and browse this store of data without problem.

  * Virtual computers that are running on this data store work as well (all files are accessible / VM is accessible on the network)

  * Unable to take backup image do error "the object has already been deleted or was not completely created.

  * Not able to take a «cannot complete the copy file... network» clone »

  Getting from newspapers in vmkernel:

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceIO: 747: command 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed, the data of sense H:0 x D:0 x 2 P:0 x 0 0 valid: 0 x 4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceToken: 293: Sync IO 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed: error/o H:0 x D:0 x P:0 x 0 2 0 valid sense data: 0x4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu6:4110) capability3: 5354: Sync READ error ('. fbb.sf') (ioFlags: 8): i/o error

  Need your help urgently to solve the same.

  concerning

  Mr. VMware

  

  Dear all,

  We have enclosed a case at VMware, please find their findings on the same.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  After the webex session, we just had, I discovered the root cause of the problem reported to an underlying problem on the block device (the logical drive, or a problem on the Board) presented to accommodate the data in question store successfully.

  In short, whenever we try to do raw reading from the disk (from sector 0), the same always fail when we reach the 30932992 bytes (31 MB) brand with an IO error (which is consistent, he is always on this region of the disc that read operations fail, no more, no less). This result can be seen, even if no partition is in the disk (using if = / dev/sdb instead of/dev/sdb1 with dd) and even after zeroing on all sectors (if dd \u003d/dev/zero of = / dev/sdb). Strangely, read operations work fine (as he writes zeros of random data) throughout the entire disk. Keep in mind that the tests I did with no VMware tools (I used almost only dd for these operations), which prohibits certainly a VMware problem (in fact, if you were to try to start the server with a Linux live CD and run the same tests that I did, you would see the same behavior).

  I know that there is no report of material of any bad behavior on the table, but data collected with our tests today completely invalid who. The next step is for you to take this to the server provider to check for problems on the table or discs, because they are there and they are the reason for the problem you reported initially.

  Please let me know if you have other questions about it.

  Thank you

  -

  David Meireles

  Technical Support Engineer

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now we have blocked a case from the hardware vendor, to see what the next move will be.

  concerning

  Mr. VMware

• Audio does not work in Windows, Safari 5.1.7 - Captivate v8 (HTML5)

  Audio does not work in Windows Safari 5.1.7 for my project CBT created in Captivate v8 and edited in HTML5. Need help urgent to solve the problem.

  You have installed QuickTime?

  End-users using Safari will also need QuickTime.

  Apple ends Safari for Windows support in 2012 with 5.1.7.

• How can I install the adobe package in a second PC by trainee license?

  Hello, I need to install in a second special adobe PC package for teachers and students. I did successfully install on the computer in the Office working, but at home it always pops up a message telling me that the code has already been exchanged and it does not install for the second time.

  It is very urgent to solve this problem. I try to change the code, but the system returns me to the same window where I have to put the code and then starts the same message.

  Please, I'll be happy to try new strategies to solve the problem!

  If you have already installed on the second machine then try to logout and login again.  Otherwise, install the sequence below.

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Flash CS6 bug AIR edition?

  Flash CS6 doesn´t seem to be able to find the AIR - lib. Edition file as test that works very well in CS5 I get an error:

  "

  1120: access of undefined property EncryptedLocalStore.

  and try to import the class to see if that fixes it:

  1172: definition com.adobe.air.crypto:EncryptionKeyGenerator could not be found.

  The path in managing AIR SDK point to... \Adobe Flash CS6\AIR3.2

  Tried to post under all versions of AIR for all available devices and get the same error. No error in CS5 so I think that it must be something with CS6 and the AIR SDK.

  Somewhat urgent to solve this problem!

  Hi Helen,

  We are able to compile your project 'EncryptedLocalStore.fla' and publish successfully at AIR 3.2 following the steps below:

  1. open your action script code and add the following import statements:

  import flash.data.EncryptedLocalStore;

  import com.adobe.air.crypto.EncryptionKeyGenerator;

  2. download the file location EncryptionKeyGenerator.as http://code.google.com/p/as3corelib/source/browse/trunk/src/com/adobe/air/crypto/Encryptio nKeyGenerator.as? r = 81 and add to the folder \AIR3.2\frameworks\projects\air\ApplicationUpdater\src\ApplicationUpdaterDialog s\com\adobe\air\crypto

  Please create a air of records and the crypto to place the file such that they could not be present by default.

  3. Add the source as \AIR3.2\frameworks\projects\air\ApplicationUpdater\src\ApplicationUpdaterDialog s\ path in the Actionscript settings dialog box.

  4 compile and publish.

  Let us know if it works for you.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team.

• Help. URGENT error 'no photo not found to import.

  I work on a program of commemoration and urgently need to import the scans and other images with different dates of creation, an external drive in LR2. Each time, by all means import, I get an error 'no photo not found in import' but three of 82 photos I need. The three that matter successfully are digital photos were taken the same day, a date which seems to be randomly dates different probably 15 or 20.

  I tried several options "File management" and "copy to: / users/name/Pictures" and "arrange by date: [date] ' and various other combinations.

  How can I solve this problem? I'm not new to Lightroom, but I've never had this problem before. A number of other users having the same problem, I saw in the forums. In each case, the problem is not resolved or if it was, I was unable to track a solution for the glitch that I am experiencing.

  It seems to me that Import should not be so difficult for any help is welcome!

  Winsen

  Huge means more than 65,000 pixels on a side, which I doubt you have.

  You have all the strange characters in filenames - i.e. non-alphanumeric ones?

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• No, my problem is NOT solved: still cannot sync photos iPad Pro iMac

  I posted this question yesterday and after a response (which was not helpful, although I appreciate Rudegar after trying to help me), mysteriously, my question has been marked as "Solved" in the list of issues, so it is unlikely that more people will look at this thread. I can't understand how to remove the "Resolved" tag, so I write my question once again.

  I am trying to sync the photos selected from my iMac (running the Mavericks 10.9.5) to my new iPad Pro (12.9 inches model, set to update to iOS 9.3.1). I connect the iPad to the iMac, launch iTunes (version 12.3.3.17, it is said), select the iPad in iTumes, click the 'Photos' tab to the left. On the right, I chose 'Selected files' and in the 'Files' window below I have check all boxes for the folders that I want and click 'Apply' if that is or 'Sync' if it is the only display option.

  Each time, a few photos refuse to move to the iPad. It's always the same, but I can find no common feature (e.g., bad post or large file size) which would explain why these photos are not going while the rest will be. Usually in a folder with 20 photos, between 15 and 20 will move the iPad. But why not the rest? It's really bugging me. I tried disconnecting and reconnecting the iPad, turning works, quit and restart iTunes, and even those who are used to synchronize in a special folder is unique. No luck.

  Can someone help me?

  I'm having the same problem Peter.  Brand new iPad Pro 9.7 inches, bought today, running 9.3.1.  MacBook Pro from Yosemite 10.10.5 running.  I always use iPhoto, because I prefer it to Photos.

  All my pictures and files sync very well with my old Air iPad via iTunes.  However on the new iPad Pro, not all photos can be synced through.  It stops just at halfway synchronization through 3000 photos.  If I get that about 1500 of them.  As you say, some folders have missing photos and I see no reason why those missing synced not everywhere.   I tried all that you tried too.  It's crazy, and I'm cross considering that it is the third all-new Apple product I bought within a year, which has caused me problems with bugs in the software.