URL creates the overset text

Similar Questions

• Create the help text for the column tabular APEX region

  Hi guys,.

  Please see the screen - shot below.

  I have to do two things:

  1. this "5000" value is passed in the URL, for example P_41_TOTAL_LEAD_VALUE and I want to display in the currency format, i.e. 5 000.
  If the value is 60000, it should be displayed as 60 000.

  2. I am required to display the help text for column of tabular form - expected quarterly value, how to proceed with that?

  Thanks in advance

  Arpit

  

  Hi David,

  I have not tried to use the Format mask, however there is no change in the display format.

  Even I tried in a different format, nothing happens.

  Try the steps given, which will solve your problem

  1. create a hidden item I say P41_LEAD_VALUE

  Protected value: No.

  Pass the URL value on this element hidden instead of P_41_TOTAL_LEAD_VALUE.

  2 create a calculation on the point P_41_TOTAL_LEAD_VALUE

  Type: SQL Expression

  Point calculation: after region (s)

  Calculation: TO_CHAR (: P41_LEAD_VALUE, '999G999G999G999G999G999G990')

  Hope this helps you,

  Kind regards

  Jitendra

• It is Possible to prevent the overset text?

  Thanks in advance and hell

  With CS 5.5 on a Mac, I am formatting of a manuscript. I did 300 pages; all pages have a Master frame.

  So far, the text fills to page 212 - after that the remaining pages are blank.

  (I know that the book will fill up a little less than 300 pages when I'm done add things.)

  When I add text - or create a page break - for example, at page 100, my preflight Panel indicates that there is now an error: overset text.

  Text from the top of the page 212 (last page) has moved down fill page 212, and the box in excess will appear at the bottom of page 212.

  My question is: why not just text flow on page 213?

  (instead of creation of overset text).

  I have "Intelligent Redistribution" checked and also

  Add pages at the end of the story is checked and also

  Limit to master text frames.

  Is it possible to establish that whenever I add text, the text flows on the next blank page at the end - instead of in excess of text?

  Thanks again!

  OK, on the master page is a text frame where will your main text? You would have got an automatically if you checked the box Document Naster text block.  It is the main setting to which I was referring. If there is not (which I think would be a good thing), then your intelligent redistribution cannot function if limited to Master frame.

• I have created a form in Indesign. Is there a way to create the default text in a text field that displays the interactive pdf "insert text here" in the text field?

  I have created a form for the company, so that I work. It is a form that will be used in several offices and has buttons, drop downs and text fields. One of the text fields has a requirement that when the PDF file is opened, the text field has something written in there already, as an example (and one only) INSERT the TEXT HERE. I created the text field in Indesign and used the text tool to type in the area of the body-copy required. After that I have to export it as an interactive PDF, text in the text field disappeared.

  Drop-down lists give an option for a default choice, but I don't see a way to create default text in the Panel of buttons and forms for text fields. Is there a workaround or a hidden feature?

  Thank you!

  Set it in Acrobat.

• PSE10: how to create the white text box with text in black? [was: question]

  trying to create a white text box in photo shop element 10 and black text, so write pop can not understand

  Open your photo in the complete edition

  In the top menu click Layer > New > layer & OK

  Select the rectangle Selection tool

  Drag a box on the top you photo where you want to place the text

  Ensure that the chip of high color at the bottom of the tool palette is set to white or press D to default to black & white, and click the rotation arrow to move the black chip behind the white chip

  Select the paint bucket tool and click in the middle of your rectangle to fill with white

  Go to the layers palette (window > layers) and put highlight the top layer then lower the opacity to around 50% slider

  Select the T tool and type in black, then save.

• Move URL in the link text or the text at the end of the story. Also: tables

  Hello everyone

  I am currently working on a script which translates by Textile Markup InDesign-formatted text. It worked well for the most part, because it is really hard to do by FindChangeByList. However, some things are a bit more complicated than the others. Namely the URL in the text. Textile, all URLs are so similar. Let's say I want to make a link to Google. So I type this: 'Google':http://www.google.com happen Google. I can isolate the word and delete the URL of ["------"](.+?) [\\\"]:\\?\\S+ and substituting $1.] So far so good.

  However!

  It would be great, if the URLS are still in the text. Then I would be to have as follows: Google or that the word Google (or any what $1, really) is found in the text, then the link is added at the end of the text as a sort of "Sources"-paragraph thing. ". How is that possible? I can do by FindChangeByList? Because that would be cool, because then I would just need to run a script.

  And here's a general question: How can I translate Textile-Tables in InDesign Tables formatting?

  For reference, it would be a table with a row of a header.

  |_. name | _. age | _. sex |

  | Joan | 24. e _

  | Archie | 29. m |

  | Bella | 45. e _

  Is this possible?

  Thank you very much for your help!

  Hello

  Ok. If you can assume that $2, it's exactly a word ==> we could edit it above like this:

  //...
  mSource = mDoc.hyperlinkTextSources.add(mText[0].words.itemByRange(0,-2).texts[0]);
  mDest = mDoc.hyperlinkURLDestinations.add(mText[0].words[-1].contents);
  //...
  

  Jarek

• Could not create the visible text

  Hi, I have the same problem as TSULLY 1981. Move from CS to CS6 on a Mac and can create an empty box with the text tool, but that's it. Any ideas?

  Unger027. Could you share with us the size of the image in pixels? You can see if you go to the menu located at the bottom of your picture, and if you click on the triangle, the size of the document, rather than the size of the document:

  

  As Sandee Cohen has suggested, too big or too small an image could make the invisible text on your image.

  Check the settings of the text tool in the character Panel (window > character), or reset the text tool by right-clicking on its icon in the options bar:

  

  I hope this helps!

  Stone

• Dynamically create the input text element

  Hello
  
  I'm trying to dynamically create a text entry and add it to the Table
  
  but I'm having some problem with createWebBean method we can invoke it.
  
  Please help thanks
  

  import oracle.apps.fnd.framework.webui.OAPageContext;
  import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
  import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  import oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean;
  import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
  import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  import oracle.apps.pa.ci.webui.PaSupplierImplementCO;
  import oracle.apps.pa.util.webui.Debug;
  
   public class xxpaPaSupplierImplementCO extends PaSupplierImplementCO {
  
      public void processRequest(OAPageContext paramOAPageContext,OAWebBean paramOAWebBean) {
          
          super.processRequest(paramOAPageContext, paramOAWebBean);
          xxpaProcessRequest(paramOAPageContext, paramOAWebBean);
      }
      public void xxpaProcessRequest(OAPageContext paramOAPageContext,OAWebBean paramOAWebBean) {
          
          super.processRequest(paramOAPageContext, paramOAWebBean);
          print_log("Start processRequest",paramOAPageContext);
          
          OATableBean localOATableBean = (OATableBean)paramOAWebBean.findIndexedChildRecursive("SupplierTable");
          if (localOATableBean != null){
             OAMessageTextInputBean xxPaPOQuantityBy = (OAMessageTextInputBean)createWebBean(paramOAWebBean,OAWebBeanConstants.MESSAGE_TEXT_INPUT_BEAN,null,"xxPaPOQuantityBy");
             OAMessageTextInputBean xxPaPOQuantityBy1 = (OAMessageTextInputBean)createWebBean(paramOAWebBean,MESSAGE_TEXT_INPUT_BEAN,null,"xxPaPOQuantityBy");
             xxPaPOQuantityBy.setPrompt("Change Quantity By");
             xxPaPOQuantityBy.setMaximumLength(10);
             localOATableBean.addIndexedChild(xxPaPOQuantityBy);
             print_log("PO QTY ADDED ot Supplier Table",paramOAPageContext);
          }
           
          print_log("End processRequest",paramOAPageContext);
      }
  
  }

  Hello

  Try with:

  OAMessageStyledTextBean oamessagestyledtextbean is createWebBean (OAMessageStyledTextBean) (oapagecontext, "MESSAGE_TEXT", null);.

  Concerning
  Meher Irk

• create the single text field to display in the select list

  Hello, I will through in circles with what I have to achieve. I have this on a previous post, but do not know if what I was asking, it was OK

  what I need to do, is to have a list of selection of size for the end user, BUT in the backend, I need to have a text field or text fields which can be manually changed. the db has a prod table with

  ID

  / / DESC

  Price

  Size

  fields, so I thought that if it was a field of single line text that could store all sizes in the db, a field and can be edited in the backend

  OR

  paypal buttons how it where the backend has a function of size to add you can add one set

  Mount of sizes and can manually change them is necessarily, because I have the backend show if a product has sold out and I wanted to be able to type "sold out" so that in the selection list

  Thanks in advance for any help

  Not much needs to change.

  You can always display the same result as you would if a product is available.

  The only difference would be the item would show "sold out". In this case, add a conditional event listener to listen to 'Sold Out' in the status of product on your front-end server. A hyperlink to 'request form' echo here.

  Basically, a 'form' link would appear if the product is "sold out".

• overset text when creating background using the rectangle tool

  I met a strange problem that I can't solve alone, and I can't describe it well enough for a search engine to see if anyone else has experienced. I have a document with text and graphics on the page. I've created a header in the master document, but as soon as I tried to create a background color by dragging a rectangle on any page, it says that my header text is overset. I tried to send the bottom at the back of the document in the rearrange menu, always in excess. Tried to create the background on another layer below the text of the header... always in excess. Curiously however, when I clicked on the Red '+' symbol in the text box and click outside of it (as if I had to create a new text box to continue the overset text) will be the text magically adjusted comfortably inside its original text box (and no new text box is created). So I thought that solved the problem, but all the lines of text in the body of the document are always in excess. I have the piece longer than 100 boxes so I don't want to do it manually... and even when I try to adjust the text box to solve the problem "in excess", I have to drag the right text box at the edge of the page so that it is some text can reside outside the area covered by the master page background.

  It is clear that indesign is to see the bottom not as background at all and instead a foreground that covers the text, but what is weird is that this isn't matter if I send it to the back, and it affects all the graphic elements, text. Is it a kind of void master page that I'm missing/don't understand? Thanks for the help!

  It can be a text wrapping, try to select text block, then go to the object menu > text block Options > General > ignore the dressing.

• How to create the new page in the master page and make reference to the reference text framework previous page id?

  I have problem to apply/create an element of the master page and how to run the previos page text block to create the page text

  InterfacePtr<IPageSetupPrefs> iPageSetupPrefs (,static_cast<IPageSetupPrefs * > (:QueryPreferences() IID_IPAGEPREFERENCES, docRef)));

  if (iPageSetupPrefs is nil) {

  Assert (iPageSetupPrefs);

    break

  }

  InterfacePtr<ICommand> iNewPageCmd (CmdUtils:kNewPageCmdBossCreateCommand());

  if (iNewPageCmd is nil) {

  Assert (iNewPageCmd);

    break

  }

  InterfacePtr<IApplyMasterCmdData> iApplyMasterCmdData (iNewPageCmd, IID_IAPPLYMASTERCMDDATA );

  if (iApplyMasterCmdData is nil) {

  Assert (iPageCmdData);

    break

  }

  InterfacePtr<IPageCmdData> iPageCmdData (iNewPageCmd,UseDefaultIID());

  if (iPageCmdData is nil) {

  Assert (iPageCmdData);

    break

  }

  Int32 numPagesToInsert = 1;

  PMRect pageSizeRect = iPageSetupPrefs->GetPageSizePref();

  Int32 pos = iPageCmdData->GetNewPageInsertPosition();

  ISpreadGeometry InterfacePtr<IGeometry> (spreadList->QueryNthSpread(0));

  if (iSpreadGeometry is nil) {

  Assert (iSpreadGeometry);

    break

  }

  spreadUIDRef =:GetUIDRef(iSpreadGeometry);

  PMRect dfltPMRectPageSize = iPageSetupPrefs->GetPageSizePref();

  PMReal pageWidth is dfltPMRectPageSize. Right () - dfltPMRectPageSize. Left ();

  PMReal pageHeight is dfltPMRectPageSize. Bottom () - dfltPMRectPageSize. Back to top ();

  PMRect usrDefPMRectPageSize (0, 0, pageWidth, pageHeight);

  K2Vector< PMRect> pageBoundingBoxes;

  for ( int32 i = 0; i < numPagesToInsert; ++ i) {

  pageBoundingBoxes. push_back (usrDefPMRectPageSize);

  }

  iPageCmdData->SetNewPageCmdData(spreadUIDRef, numPagesToInsert, pos +1, & pageBoundingBoxes, nil);

  / / CreateSpreadFromSpread (docRef, spreadUIDRef);

  InterfacePtr<IBoolData> iBoolData (iNewPageCmd,UseDefaultIID());

  if (iBoolData is nil) {

  Assert (iBoolData);

    break

  }

  bool16 allowShuffle;

  if (this->GetShufflePref(allowShuffle, docRef) iskFailure) {

    break

  }

  iBoolData->Set(allowShuffle);

  CmdUtils:ProcessCommand(iNewPageCmd);

  Above code, able to create a page but the problem in applied master page?

  Using document Pages face?

  I think that your posToInsertAt for IPageCmdData::Set is incorrect.

  If the doc does not have facing Pages, posToInsertAt = 1;

  If doc is facing Pages and page insertion is the left-hand Page, posToInsertAt = 2;

  If doc is facing Pages and insert page is the right Page, posToInsertAt = 1;

  posToInsertAt = spread-> GetNumPages();

  newDocCmd and newDocCmdData are not used, you can delete these.

• Help with script overset text?

  Hi, I found this script I think it is by Laubender. Which I use for a while now and I love it. It is easier to see where the blocks of text with overset text.  My Question is.  How would change this to get rid of the fill color of Magenta (perhaps with the original color of text box before the Script ran?) after the overset text is corrected

    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;   
    app.doScript  
      (  
      detectOverflowingTextFrames,  
      ScriptLanguage.JAVASCRIPT,  
      [],  
      UndoModes.ENTIRE_SCRIPT,  
      "Detect Overflowing TextFrames | SCRIPT"   
      );  
      
    function detectOverflowingTextFrames() {    
    var storyArray = app.documents[0].stories.everyItem().getElements();  
    var storyArrayLength = storyArray.length;  
  
   // A loop through all the stories of the document:  
    for(var n=0;n<storyArray.length;n++)  
    {  
      // The condition should be clear.  
      // However, there is one rare case where overflows is false,  
      // but the text frame is showing a red + sign:  
      // If a footnote text overflows in the last frame of a threaded story.  
       
      if(storyArray[n].overflows)  
      {  
        // TextContainers could be textFrames and textPaths !!  
        var textContainersArray = storyArray[n].textContainers;  
        var lastTextContainer = textContainersArray[textContainersArray.length-1];  
         
        // A function call to the last text frame, if its story overflows:  
        doSomethingWithTextContainers(lastTextContainer);  
       };  
      
    }  
      
    function doSomethingWithTextContainers(/*textFrame or textPath*/textContainer)  
    {  
      if(textContainer.constructor.name == "TextFrame") // Could be text on path as well  
      {  
        // Here your code that is changing the size of your frame  
        // In my example code here it will only fill the frame with color Magenta:  
        textContainer.fillColor = "Magenta";  
        // If you want to move the text frame, consider to unlock it first, if it is locked.  
      }  
      if(textContainer.constructor.name == "TextPath")  
      {  
        // Here your code, if text on a path should overflow.  
        // Depending on the pageItem that holds the path, the parent should be the pageItem you are interested in.  
        // Usually a graphicLine or a polygon. Could also be an oval, a rectangle or even a textFrame.  
         textContainer.parent.fillColor = "Magenta";  
         textContainer.parent.strokeColor = "Magenta";  
      }  
     
    }  
      
  };  
  

  Thank you

  Alain bombaert

  As long as you do not create a new text container to correct excessive; the following script should work for you.

  //Scripted by ?Laubender?
  //modified by Skemicle
  if (parseFloat(app.version) < 6)
  main();
  else
  app.doScript(main, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "Splice Image Along Path");
  function main() {
      var doc = app.activeDocument;
      var stories = doc.stories;
      for(s=0;s		   

• Table created from a text input fields for loop

  I am new to AS3 and animate CC. I'm not a programmer. I learn how the code I want (from YouTube and various web sources). I put the next set of various web tutorial. What I'm trying to do is create a user input field and input variable which will set the number of new text fields created by a loop for. Then store the text fields in a table to access their values to use elsewhere. The problem is, I don't know how to access the values of the input fields created in the table.  The loop for works to create the new text entry fields, I do not know how to retrieve their values.  In fact, I don't know even if the text that I entered new fields is currently stored in the table. I think that the text field itself, as an object, is stored but not the text I enter the text field (which is what I want).  I hope someone can help me...

  to import flash.display.SimpleButton;

  import flash.events.Event;

  import flash.text.TextField;

  import flash.text.TextFormat;

  import flash.text.TextFieldType;

  var captureText: Array = new Array();               meant to be the text of "aTextFields" of the "aTextFields" table values

  var text3: String;                                               variable as containing "captureText [0]"

  var aTextFieldsText = new TextField();             dynamic text field called 'TextFieldsText '.

  aTextFieldsText.border = true;

  aTextFieldsText.width = 100;

  aTextFieldsText.height = 25;

  aTextFieldsText.x = 300;

  aTextFieldsText.y = 55;

  addChild (aTextFieldsText);                              Add "TextFields" to the value of the scene and the variable "Text3" poster

  var nTextFields: number = 2;                          creates the number of input fields, and would be attached to an entry on the scene.

  var aTextFields: Array = new Array();              array that contains ""input TextFields text fields " "

  for (var int i; i < nTextFields; i ++) {/ / loop for who created him ""text fields of seizure of TextFields " based on the "nTextFields" value"}

  aTextFields [i] = new TextField();

  aTextFields [i] .Guy = "entry";

  aTextFields [i] .width = 100;

  aTextFields [i] .height = 25;

  aTextFields [i] .border = true;

  aTextFields [i] .text = "";

  aTextFields [i] .x = 150;

  aTextFields [i] there = 15 + i * aTextFields [i] .height + i 5;

  captureText.push (aTextFields [i]);                 Push the table 'captureText '.

  addChild (aTextFields [i]);

  }

  var MyButton: SimpleButton = new Button;

  myButton.x = 339;

  myButton.y = 268;

  addChild (myButton);

  myButton.addEventListener (MouseEvent.CLICK, test1, false, 0, true);  "Text3" variable on captureText set button [0]

  function test1(event: MouseEvent): void {}

  Text3 = captureText [0];                                "Text3" variable to captureText [0]

  aTextFieldsText.text = text3.toString ();       displayed in the text field "[TextField object]" instead of the text value of the entry at index [0]

  trace ("aTextFields =" + aTextFields);

  trace ("captureText =" + captureText);

  trace ("Text3 =" + Text3);

  }

  captureText is an array of textfields and not a textfield. This line:

  Text3 = captureText [0];

  Maybe should be:

  Text3 = captureText [0] .text;

• Overset text is not in story editor

  Hi people,

  I can't do the overset text display or reappear in any other reasonable way. The editor mode just displays «#» (This is what is displayed on all pages). But I don't know that there is overset text because I can load it, but simply cannot place anywhere it will show. Also, at the edge of the box there is no red zone which marks usually overset text, but just a simple box empty blue. Don't get no error message in the preflight Panel.

  Because I structured the main part of the book with text in overflow, this means that the entire book is currently invisible.

  Furthermore, the text has been postponed when inserting a table of contents.

  I really hope that someone knows what could be causing...

  See you soon

  Lisa

  I don't think that there is some overset text.

  You can click in the empty outport of any image to say ID that you want to link this image to another, which would give you the loaded cursor that you describe, but that doesn't mean not there is additional text in the frame that did is not, only that if there is more text added that it will sink to the linked frame again if necessary. # Is the end of the indicator of the history, and you'll see even in a framework that contains no text at all.

• Create hyperlinks for all URLS in the text... possible?

  Hi all

  I'm starting to learn how to make books ePub files I put on the page and I have developed with a very annoying problem. In the notes or bibliography, he has often URLS in the text. I need have related them on the site, they refer to in the ePub. I wish that there is really a sort of way automated to do, because if it is not possible, I do not see do me it manually for a book in full...

  Then, well, you guys help me with this? I'm really bad in script so I don't know if it's possible, but... Thanks anyway!

  Annabelle

  If you are using CS5 or CS5.5 (the latter is strongly recommended for all things EPub), "Convert URL into hyperlinks" is a hyperlink palette menu command:

  http://community.Adobe.com/help/search.html?q=hyperlink&HL=en_US&LR=en_US&l=indesign_produ ct_adobelr & site = indesign_cs5_all & auto = 1 & Filter = 0