Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

Similar Questions

• How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

  I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

  Any suggestion?

  Thank you

  Wayne

  NVM. I can boot from a USB on the computer.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• HP Pavilion Elite HPE - 575 a desktop PC set up latest patch Windows 7 from Tuesday

  Hello

  My HP Pavilion Elite HPE - 575 a Desktop PC running Windows 7, 64 bit will not configure the last patch Tuesday, August 14, 2012 Windows. The computer seems if running all the updates correctly when stopping however the next time that you start it only configures approximately 30% before failing and then close to return to the previous state.

  Something has changed in the microsoft update that resolved itself after several days without doing me anything.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

  Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

  Thank you.

  Hello

  Your product, it seems that you should have enough space to expand.

  I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

• Update the BIOS HP Pavilion b4650e

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-56156-1&cc=us&DLC=en&LC=en&...

  Since the upgrade my HP clubhouse of XP to 7 I noticed the original BIOS with no upgrade. I found this link, but apparently only compatible with XP. What can I use to upgrade my Pavilion d4650a, running 7

  Hello

  There are two philosophies dealing with updates:

  1. "if it ain't broke don't fix it."

  2 install the updates as expected by the manufacturer as they correct to avoid her problems.

  Manufacturers (Windows, HP, CISCO, IBM, Intel, SET, NVIDIA, ASUS, EVGA, Dell, Panasonic, Toshiba, Cyberlink, Oracle, etc.) spend billions each year, produce updates of BIOS, firmware and software to achieve this.  If she did not sense of business while they do it.  I found thanks to many years of experience that the cost to rediscover was a lot more than the cost and the risk to apply updates.  An experienced hpar once said that exposure to a bad update was less than 1%.

  Only you can decide which "side" you want to be in.  Personally, I'm proactive rather than reactive.

• Update the BIOS HP Pavilion p6-2071scm

  Cannot locate the BIOS updates, or updates driver from HP site - is not that I do not receive my updates of pilot also. BIOS update is my last hopeful Act prior to disposing of this motherboard, since the old BIOS does not support my new graphics card (Asus GeForce GTX 750 Ti, no requirement for extra power, although I bought a POWER 600 watts PSU to replace the junkware 300-watt power supply provided with the PC). I am aware of the latest update almost certainly will not solve the problem, but I have nothing to lose at this point. I would gladly exchange of the card a MSI model which, according to the Internet, work with older versions of BIOS, but my dealer will not refund goods if they have been installed once (even if they do not work).

  When connected, the computer will beep three times - once every 20 seconds or less - and ends up on a black screen with a blinking cursor. You can probably see how that is a problem.
  
  The specs of my PC seem to be the same as these, with the exception of a number of different products and improved the power supply (and no, this page gives the list updates, either):
  http://h20564.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5151865 & calledBy = & docid = emr_na-c03068621...

  And, as you can probably guess, the BIOS was never updated before, which means that it is v7.13.

  If no update is available, it worse by bricking of my sweet baby mother of Jesus or does not solve my problem, is there budget motherboards I could buy which are entirely compatible with my system (Yes, the Asus GTX 750 Ti is included) without having to replace the computer case or part?

  Updated BIOS for card mother-H-CUPERTINO2-H61-uA (Cupertino2) TX.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58264.exe

• Installing XP - 64-bit in the HP Pavilion Elite d5200t ATX CTO desktop PC

  Hello!

  I recently got a HP Pavilion d5200t desktop pc. He came with pre-installed Vista 64 bit. Now, I want to install XP 64 bit or XP-32 bit and Vista 64-bit.

  I tried to install both XP 64 and XP-32, and he gave me a blue screen with error messages. In addition, I want to use the XP boot cd to partition my hard drive. Partition Magic gave me comaptibility warnings, so I did not. Any suggestions how get this resolved would be greatly appreciated.

  Thanks in advance

  Make sure first of all of the recovery disks.

  Search in the bio and see whay options you have for the AHCI mode. You can change it to IDE?

• HP Pavilion Elite HPE-400z CTO: HPE-400z S/PDIF

  I need best plug to the motherboard of the HPE-400z system.  I need to the rider in a video card and the document online say it is an internal port but nothing describes where it is.

  Help, please.

  Hello

  See the image below.

  

  The SPDIF connector has been used with older graphics cards to route the audio signal to the output from the HDMI connector.

• HP Pavilion Elite HPE-170 has Desktop PC - graph disc flashing - Normal?

  Hi all

  I just bought a http://support.hp.com/us-en/document/c01969875

  and I was wondering if the orange graphic of 3 discs piled on each other in the right upper part of the façade of the tower is supposed to flashes and turns off all the time?

  Or is it telling me that I'm supposed to do something?

  Hello BigBad64, while I'm not familiar with your system, the light you describe indicates the hard disk activity.

  Normally, that's fine because it flashes a little or even a bit, depending on what the system is doing at a given time.

  Even if you can not do anything, the drive hard activity can and cannot, turned on because of background running applications and services.

  There is also the possibility of Windows running the task of "Indexing", which is supposed to help with research on the system.

  I'd be too concerned about this, as there doesn't seem to be normal.

  I noticed that you mentioned that you just received this system. It was released in December 2009 for customers in Australia.

  This would be not for me either, just thought that it kinda weird that you have just recently.

  I hope this helps.

• Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

  Operaring system: Windows 7 64-bit

  CPU: Core i5-2500, 3.3 GHz

  Memory: 10 GB

  Video graphics card: GeForce GT 420 - OEM

  Hard drive: 1 TB

  Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

  Power supply: power supply 300W

  Several features of the product: HP Pavilion Elite HPE-510 t

  due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

  GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

  GPU size: 9 "x 4.4"

  Power supply: Antec High Current Gamer HCG-750 750W Series

  "Power supply Dimensions: 7.1"x 5.9"x 3.4"

  I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

  Thank you

  The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

  Frank

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• Pavilion Elite HPE-570f: update Bios

  Pavilion Elite HPE-570f

  Prod. BV542AA #ABA

  Recently upgraded to Windows 10 (64 bit) to Windows 7.

  The Bios is older than 5 years. is it possible to upgrade?

  What I've read, HP uses modified BIOS, not those generally available on the motherboard manufacturers websites, even IF you can find your Board on the website of the Board manufacturer. The only "safe" to install BIOS would be those that HP show for download on their Web page to your computer, in your case this page is:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5061025#Z7_3054ICK0KGTE30AQO5O3KA30R1

  and I don't see any update of the BIOS listed so far.  In my case, with my computer, they did an update that appeared shortly after my purchase.

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]