USB 3.0 on Windows 7

Similar Questions

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• USB device recognized on Windows 7, but not Windows XP

  Last week, some of my USB devices need not be recognized on my Windows XP SP3 laptop.

  First of all, it happened with 2 external USB HDD connected via a mini USB hub. Connecting them individually did not solve the problem. The error I got was:

  USB device not recognized. One of the USB devices attached to this computer has worked and Windows does not recognize.

  More importantly, the laptop is no longer recognizing my USB thumb drive, which works perfectly on my Windows 7 machine to work.

  Can I reinstall my USB drivers? Just remove the USB devices, reboot and let Windows reinstall them? They need to be specific to the manufacturers of the drivers?

  I deleted it and reinstalled my hubs USB Device Manager etc, but a device is not installed correctly: mass storage controller. It is of course preventing me from accessing the USB and external hard drives. Where can I get the drivers for this if Windows XP does not have? Sure that the key USB is FAT32 (the default format) I went in the properties of the mass storage controller in the Manager of peripheral and copied the device ID. I did a Google search and was surprised to find that it was a card reader. I downloaded the drivers from my manufacturer Web site, and Windows has detected and installed the drivers for the card reader, as well as the mass storage controller. The USB appears in the Explorer, but shows 0 items. I have After the reboot, the USB is not in Windows Explorer, and when I unplug and reinsert an error comes up saying the USB device is not recognized and malfunctioned.

  The solution was to turn off the laptop, remove the power cable and leave it for a few hours, before feeding it back.

  Windows detected and installed the device very well then.

  I don't think that I understand perfectly why he fixed.

• Peripheral USB has malfunctioned. Windows does not recognize it.

  Peripheral USB has malfunctioned. Windows does not recognize it.

  Hello

  ·        What is the exact error that you receive when you try to connect USB?

  ·        Since when are you facing this problem?

  ·        Which device you are trying to connect via USB?

  ·        This problem occurs only with a USB device or USB devices?

  Method 1:

  You can try to plug the USB key into a different USB port and check if you face the same problem.

  Method 2:

  Also I suggest to Uninstall USB controllersfrom Device Manager and check if it solves the problem. To do so follow the steps below:

  (a) click Start

  (b) the Device Manager type in the search bar and press ENTER

  (c) in device manager, go to the bottom and double click on Bus USB controllers, this will open a list of USB controllers to uninstall all controllers and restart the system this will reinstall all USB controllers again.

   

  Method 3:

  I also suggest to run the difficulty he provide in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 4:

  You can also try to update the latest drivers for chipset on the motherboard manufacturer's website.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also check out the link below:

  http://support.Microsoft.com/kb/555375

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't uninstall Zoom of USB Modem on my Windows Vista computer

  I have problems to uninstall the Modem USB Zoom on HP Windows Vista Home Premium computer, it does not give me any error message. He asks me to continue and click on continue and then it comes back from the beginning. EarthLink advised me to uninstall this because I can't always connect to the internet. I bought a new USB Modem since it was corrupt, and in order for me to get installed it, I need to have the old driver to be uninstalled.

  Please help me on this. Thank you!

  Hello

  I suggest you follow the methods and check out them.

  Method 01:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Method 02:

   Uninstall or reinstall a device.

  http://TechNet.Microsoft.com/en-us/library/cc753699 (WS.10) .aspx

• How can I download an lg usb modem on the windows site?

  downloads

  How can I download an lg usb modem on the windows site?

  How can I download an lg usb modem on the windows site?

  Your question makes no sense. How anyone can download a modem?

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7

  My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.

  Hi Faisal,.

  What is the brand and model of the computer?

  You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This problem occurs because the USB 3.0 device is not completely inserted in the port.

  The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.

  Method 2:

  Uninstall and reinstall the USB drivers and check if it helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box and then click OK.

  (b) click on the Hardware tab.

  (c) click on the button Device Manager.

  (d) expand Bus USB controllers.

  (e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  We know the results.

• USB issues after installing Windows 7

  Hi guys,.
  Yesterday I upgraded my Vista 64-bit for Windows 7 64 bit PC. I did a clean and updated installation in the form of my readers in the process. Everything works fine except one thing.
  I bought a new audio interface for recording and playback of music. It's a Focusrite Scarlett 18i6. I installed all the software including updates since the Focusrite website and everything seems to be ok. I started to play music from itunes to test it and it worked well for a couple of minutes, then it disconnects just himself.
  It shows that it is connected in the Device Manager and the windows volume control panel. But it disconnects from the control panel of mixture of Scarlett and itunes stops playing because it no longer recognizes that there is an output device.
  The only way to let him play again is to unplug and plug back the power of the interface, and then it will work for a few minutes or a few seconds.
  I tried to update all my drivers in Device Manager. Unfortunately Acer does not all the drivers for my PC and windows 7. (Aspire X 1700).
  I have downloaded all Windows updates.
  I even tried to reinstall Windows 7.
  I'm trying this with nothing else installed on my pc is not a software conflict.
  I have an old XP computer, age about 6 years old and works like a slug, but it works with the interface very well. So I know that the problem doesn't lie with the interface.
  I saw somewhere that there is a known problem with USB drivers when using Windows 7, so I downloaded the patch, but it is said that it is not necessary on my PC.
  I'm very, very close to buying a new PC that I don't really want to do until I'm sure it's a problem with my PC which can not be repaired and that the same thing won't happen with a new Windows 7 pc.
  And Yes, my interface is compatible with Windows 7.
  Any help would be greatly appreciated as I have tried everything I can think.
  Thanks in advance.
  Emma

  Hello

  Hello
  You don't have to remove the keyboard and mouse USB. Try to reinstall the USB controllers. Visit the site of the manufacturer for the latest available drivers.
  http://support.Acer.com/us/en/product/default.aspx?tab=1
  As you mentioned that Acer has no drivers for Windows 7, you can install the drivers for the chipset in Vista compatibility mode and check.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  Try the USB device on another computer.  If you get the same error in another computer, then the unit has probably missed and the files that it contains are lost.

• My usb data key freezes windows Pathfinder.

  It works in another computer. There is no problem if I try with the win in safe mode.
  After a long time, I get the message; The E: drive is not present. (Free translation from Danish)

  A stick to another causes Pathfinder show the stick on and again. He also works in safe mode.

  Pulling on the handle's Pathfinder to continue.

  Fix it don't show any error, I hope I run one on the right.

  Jørgen cordially

  Hi Lundoer,

  Welcome to the Microsoft community.

  I understand from the description of the problem, that the data USB key is icy windows. Let me know if I'm wrong. I'll be happy to help you on this question.

  Because the problem is solved in safe mode, there should be a few programs of third at the origin of the problem. I suggest you perform the clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.

  I hope this helps! Let us know if you have more questions with windows in the future.

• Avoid opening every time Lightroom that I plug a USB device into my Windows 10 machine?

  Hello

  I've recently upgraded to win 10 and now I have Lightroom CC opening every time I plug a USB key in my machine regardless of what is on the USB device. I tried to disable all the options in Lightroom without success and any internet help either gave no results. It is extremely boring and tedious since most of my USB devices have nothing to do with my photos!

  Kind regards

  Mirko

  Hello Sarika,

  As I mentioned in my post, I had already tried that I tried and it does not solve the problem. The solution is to disable the USB AutoPlay feature in Windows 10

  Kind regards

  Mirko

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• Satellite A30-514: problem of USB after you installed Windows XP SP2!

  I have a satellite A30-514. I clead the HARD drive, reinstall the software from the recovery CD I got with the PC.
  After that, I launched Windows updates and installed SP2.

  But now my USB only recognizes the mouse and nothing else, when I try to connect a device told me that there was an error on the data and the installation cannot last. I tried reinstalling the driver from chipset from the CD, but nothing happened.

  Hello
  Service Pack 2 does not have hardware redetection of embedded devices. I have the same problem on my S5200 and I just refresh the Device Manager, and after that, it was all right. So, try this one.