Similar Questions

• USB Debgging recognized by the PC but not by any other software + Acer Sync?

  T1) it has not been long I've owned my new liquid E700 of Acer (/ E39; what's the diff?). It's an android 4.4.2 Kitkat and I unlocked the developer options. Recently, I searched suites fo PC for Android and believe it or not, I found a good number of free software on the net. In any case, all the software I found aske me to turn on USB debugging I did. When I connect my E700 liquid Acer without debugging, I get an icon in the section pilots in "My computer" (Windows 7) and when I turn debgging, I get another. This means that my laptop makes a difference between enabled and disabled USB debugging. However, none of the software that I downloaded acknowledged that debug mode is on. If it's a software only once, I would say that this PC Suite sucks, but all? There is a problem. Has anyone come across this and it fixed please?

  Q2) both me and my partner have Acer laptops, mine is Windows 7 and hers is Windows 8.1. When I had connected my phone to my partner's laptop computer, drivers have been installed, and a small desktop Gadget that resembled a semicircle U shaped with a smartphone to lower further, while none of this happened on my Acer. is there such a thing as a phone Acer laptop Acer connection/synchronization? It works on Win7? Daniel hasn't it happened on mine?

  -I would like to thank very you much for reading!

  1ST QUARTER)

  E700 aka E39 is the same, the name of the product trade name just vs

  on the USB debugging, on Device Manager, with debugging enabled, do you have any yellow exclamation?

  Q2)

  Can you please post a screenshot of this icon?

• USB-6009 recognized by Windows but not by MAX

  I have a NOR-USB-6009, just bought this week.  I installed the full package of NOR-DAQ (NIDAW910f0.exe), rebooted and plugging the unit.  It is recognized by Windows (it appears in the title of "Data Acquisition hardware" in Windows Device Manager), but will not appear in the measurement and Automation Explorer, despite updates and reboots.  Any advice on how I can make the device appear in MAX, so I can set it up?

  I'm running Windows 7 x 86.   MAX is the 4.6.2f1 version.  The driver is listed in the Windows as version 2.4.0f4, copyright 2010 (it has been downloaded this week, so obsolete driver versioning should not be a problem).  I tried several USB ports, all with the same result.

  The light on the unit will flash green.

  I did two NOR-USB-6009; I tried both, with the same result.

  Advice?

  Thank you!

  -Dan

  Problem solved, FYI.  The solution was just to restart twice more.

  The answers to your question, however, wer:

  * It seems perfect, with the small icon or no exclamation point

  * Yes, it's called a USB-6009 in Windows

  * Yes, the device has worked before

  * Yes, all other USB stuff works very well

  We will not call it a problem for the moment; I don't know what was going on.

  Thanks for your quick response!

  -Dan

• USB foot pedal problem (Infinity IN-USB-2): recognized by Windows but does not work on VMware Workstation 10

  When I connect an Infinity IN-USB-2 pedal for my guest Windows 7 Professional (on Ubuntu 14.04 and VMware Workstation 10.0.2), the pedal gets recognized by Windows and different applications, but by pressing the pedal itself has no effect.

  I downloaded a USB foot pedal Tester (http://vec-infinity-in-usb-1-foot-pedal-tester.soft112.com/) on the client and he acknowledged that the device is connected, but when I pressed on any of the three pedals, the tester has not detected the presses.

  I tried the pedal on a real Windows computer, and it worked fine.

  When I connect the pedals, even with the guest in the foreground, VMware Workstation will appear a dialog box:

  The specified device is claimed by another (usbhid) driver on the host operating system. The device can be used. To continue, the appliance will be first disconnected from its current driver. [Cancel] [OK]

  When I click 'OK', we state above: Windows recognizes that the device is connected, but foot-presses are not detected. My other USB devices are not pop this dialog box. (Click Cancel maintains the device disconnected from the guest.) I don't know if the dialog box is significant or a red herring.

  Here's what/var/log/syslog says when I connect the pedal with the Windows client in the foreground:

  kernel: [281434.822751] usb 2 - 1.7: new low speed USB device number 28 using ehci-pci

  kernel: [281434.920667] usb 2 - 1.7: new USB key found, idVendor is 05f3, idProduct = 00ff

  kernel: [281434.920672] usb 2 - 1.7: new USB device strings: Mfr = 1, product = 2, SerialNumber = 0

  kernel: [281434.920675] usb 2 - 1.7: product: pedal WITH USB

  kernel: [281434.920678] usb 2 - 1.7: manufacturer: VEC

  kernel: [281434.923852] entry: CVE CVE USB pedals as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input38

  kernel: [281434.924239] is hid-generic 0003:05F3:00FF.0016: entry, hiddev0, hidraw3: USB HID device v1.00 [CVE CVE USB pedals] on usb-0000:00:1d.0-1.7/input0

  PSG-probe: check the bus 2, device 28: ' / sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7 '.

  PSG-probe: bus: 2, device: 28 is not a MTP device

  And when I click on "OK" to the dialog, he said:

  kernel: [281480.324926] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  kernel: [281480.900448] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  When I unplug the device, it is said:

  kernel: [281517.582472] usb 2 - 1.7: unplug USB, the device number 28

  Thanks for the ideas on solving this problem.

  Answering my own question: I spoke with a salesman who told this pedal does not work on virtual machines for the following reason:

  These pedals are all just Universal USB controllers that require programs or applications to be able to see and recognize them for use. Because they are installed by the base of Windows and Generic USB devices drivers, they can not be seen my remote computers via USB sharing etc.

  They recommended using a hotkey program to work around the problem. I have not tried this solution, but bought a different pedal that works out of the box with VM: a vP-1 vPedal. Lower build quality than infinity (in my opinion) but it works perfectly.

  This is the idea of the key of the seller:

  I have a solution that will allow you to use the pedal as expected if the remote program who need to use supports the use of shortcut keys. For example, these pedals are commonly used with NCH Software Express Scribe professional software. This software can use either a pedal, or you can assign the playback functions to access keys. In the scenario you are talking you re Express Scribe on the remote computer to use keyboard shortcuts, you then install Pedalware (http://www.altoedge.com/pedalware/index.html), a free Windows only the foot pedal utility made by NCH Software, you then use the Pedalware utility to assign the buttons on the pedal of a keyboard shortcut that coincides with those remote program.

• Recognized by the BIOS but not by Windows 7 disks

  I have 4 internal installed hard disks that worked well up until the other day.  The first is my main C: drive.  The second is my main data with several patricians disc. Then, I have two drives more who serve backup online and archive.

  When that I start my computer, the BIOS reports all four drives are present, but for some reason any Windows 7 seems not be recognizing the last two.  They are not classified in management of the discs, even on a new analysis and won't come when I try to scan for missing devices using Device Manager, where they are also not listed.

  Someone at - it ideas why this might be?

  Hi enormouse affect,

  1. you did it any software / hardware on the computer before this problem past?

  2. What is the number of brand and model of the computer?

  There are several possible reasons that the hard drive is not recognized.

  ·         Missing Chipset drivers

  ·         Hardware failure

  ·         It is an IDE drive, and it is in the wrong state (master / slave)

  ·         It is disabled in the bios

  Determine if the hard drives Sata or IDE. Go into the bios and see if the disks are disabled by accident. If you have verified all of this, and the drive is still not recognized, download the latest drivers from the website of the manufacturer of your motherboard chipset. Try to change the mode from AHCI to IDE in the bios.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• USB device detected by Windows 7 but I don't see any records or device in MY COMPUTER

  My Windows 7 manager defrosting can detect a storage device Seagate 150 GB but MY COMPUTER cannot see him defrosting, so I can't open my old XP files with this device connected to the outside.  I tried to connect the device internally but am no farther than the same problem, thanks. Dunstan

  My Windows 7 manager defrosting can detect a storage device Seagate 150 GB but MY COMPUTER cannot see him defrosting, so I can't open my old XP files with this device connected to the outside.  I tried to connect the device internally but am no farther than the same problem, thanks. Dunstan

  you mean the files are hidden inside your hard drive or hard drive is not detected? u can see it in Device Manager?

  (1) try to change / assign a different letter for the drive through disk management, if it is no longer visible through the Disk Manager

  (2) if files and folders are hiddin use the attrib command

  Open the command prompt run as admin and go inside your hard disk by typing the letter of the hard disk on the commnand line

  For example D:

  then use attrib - a-s-h - r-* /s /d

  (3) try to run usbdirver auto http://go.microsoft.com/?linkid=9643528 microsoft fixit

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices#EGB

• USB disk appears on disk management, but not on 'my computer '.

  Hello

  I have a WD Passport Drive 500GB 2.5 USB external ".

  I have it plugged into the PC (Windows XP Home SP3), material has been recognized and installed correctly, but no additional disk appears on "My Computer".

  I entered "Disk management", the disc appears with the name, but without drive letter, I attributed to "G:" to it.

  Disk management I can right click above and "Open" the disc to see the content, but still it does not appear under "My Computer".

  BTW, another USB Disk-On-Key they receive a drive letter and appears on "My Computer" as it should.

  Best regards

  AVI Glam

  Hi AviGlam,

  Try the methods below:

  Method 1:

  1. Uninstall USB drivers

  a. Click Start and then click Run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. right click on USB and then click on uninstall to remove it.

  2 analyze the change of material and let Windows automatically re - install driver for your device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.

  b. in Device Manager, click on your computer so that it appears highlighted.

  c. click Action and then click Scan for hardware changes.

  d. check the USB device to see if it works.

  3. find if your device is recorded and assigned a letter.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  a. click on start

  b. Select run, in the Run dialog box type regedit

  c. open the registry editor, navigate to the following item:

  HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

  Method 2:

  If method 1 does not then you can follow the steps below:

  Access the external hard drive via a command prompt, copy the data, and then format the hard drive.

  a. Click Start, type: cmd in the search bar.

  b. right click on cmd, and then click Run as administrator.

  c. type the following command:

  Copy [source] [destination]

  Note:

  Source: Specifies the location from which you want to copy a file or set of files. Source can consist of a drive letter and colon, a folder name, a file name, or a combination of these.

  Destination: required. Specifies the location to which you want to copy a file or set of files. Destination can consist of a drive letter and colon, a folder name, a file name, or a combination of these.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My USB devices were working and are now not recognised in Vista (SP2)

  I spent days reading the forums and try solves nothing doesn't.  I have a mouse, printer, drive hard USB and fingerprint reader.  First mouse has stopped and the rest followed in the course of the last few days.  At least I found someone with an old PS/2 mouse, so I have a mouse to work to work with.  None of my devices were conflicts in Device Manager when I started it but after remove all and try resetting of USB Hub and unplug the machine, they are all not recognized.

  the sfcscan showed in the report
  2011-09-10 18:59:01, info CSI 00000156 [SR] components check 100 (0 x 00000064)

  2011-09-10 18:59:01, Info CSI 00000157 [SR] beginning verify and repair

  2011-09-10 18:59:12, info CSI 00000158 [SR] repair file corrupted [ml:520 {260}, l:12 {6}] '------? \C:"\[l:20{10}]"config.sys' of the store

  2011-09-10 18:59:13, CSI Info 0000015a Verify [SR] full
  and
  2011-09-10 19:03:15, CSI Info 000001 d 5 [SR] repair of components 1

  2011-09-10 19:03:15, CSI Info 000001 d 6 [SR] beginning operation check and repair

  2011-09-10 19:03:15, CSI Info 000001 d 7 [SR] repair corrupted file [ml:520 {260}, l:12 {6}] '------? \C:"\[l:20{10}]"config.sys' of the store

  2011-09-10 19:03:15, CSI Info 000001 d 9 [SR] full repair

  2011-09-10 19:03:15, 000001da CSI Info [SR] validation transaction

  2011-09-10 19:03:15, CSI Info [SR] 000001de check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully
  After repair, I'm still in the same place.  There are 8 USB ports in this machine, it seems unlikely that everything was going wrong at the same time.  Also all my USB devices work on other machines, so it's not devices.  I'm stumped and need some fresh ideas please.
  Oh, I also tried two restores system to earlier dates and both failed.  I don't know why.  Should I just try old restore points?

  Hello

  Is his as well. Especially if you have the problem of speed with a single
  USB 2.0 device is attached.

  Well, if you want to try a upgrade/repair on-site Installation and then a complete cleaning
  Windows Setup.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  In no joy try a clean install or restore the system back to out of the box state (both delete
  all programs and data).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• SATA Drive is recognized by the BIOS but not Disk Manager

  Hello

  I'm having a little trouble with a PC, my father gave me. He was still under Windows XP, I formatted his 5 ready for my use SATA drives, then I installed Windows 7. When I finished installing the BIOS recognized the correct readers, I created a JBOD Volume, but Disk Manager does not recognize. I tried different tables without tables, restart, reinstall Windows 7, formatting the disks to the format of the ODM using my laptop and try to find an updated driver (impossible even to find any drivers online).

  Please could someone give me some help?

  I use 5 Hitachi SATA disks

  Here is my system info:

  

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that the SATA drive is not recognized in disk management.

  I suggest you to refer to the suggestions by Anil Kumar B responded on 7 September 2013 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/drives-recognised-by-BIOS-but-not-by-Windows-7/4a4c6905-a0f2-4540-9f9e-62c75ece897e

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• USB printing support is a USB device that is older and may not work with USB 3.0

  Separated from this thread.

  Mahesh,

  I had a same problem, followed your recommendations and everything worked fine for a day and a half. Now I get the same error again.   Are there any additional settings or changes I do that can keep it works?

  Thank you!

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the USB device?
  2. the problem occurs only with a specific USB device?

  3. What is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 USB drivers are corrupt.

  2. USB port does not work.

  3. hardware issue.

  I suggest you run the hardware troubleshooter to check if it helps.

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Avoid opening every time Lightroom that I plug a USB device into my Windows 10 machine?

  Hello

  I've recently upgraded to win 10 and now I have Lightroom CC opening every time I plug a USB key in my machine regardless of what is on the USB device. I tried to disable all the options in Lightroom without success and any internet help either gave no results. It is extremely boring and tedious since most of my USB devices have nothing to do with my photos!

  Kind regards

  Mirko

  Hello Sarika,

  As I mentioned in my post, I had already tried that I tried and it does not solve the problem. The solution is to disable the USB AutoPlay feature in Windows 10

  Kind regards

  Mirko

• USB thermometer works in Hyperterminal &amp; MAX, but not in my VI

  I have USB (Omega TJ - USB) thermometer.  I contacted with her success in Hyperterminal.  When I try with MAX, it usually starts working after the second attempt to read/write.  But even if I put the termchar 0xD and termchar_en to True, I still have to type my writing as 'C' back ' 20.2 c ' (20.2 C being the temperature) any idea why this happens?

  In addition, I go ahead and make my VI, very similar to that found in the labview tutorial - image shown here: http://zone.ni.com/cms/images/devzone/tut/a/e09bfd41228.gif I put it for baud: 38400, 8n1.  and I also write 'c', but I get the error 1073807339.  I tried to change the buffer without change in the results.

  I thought it would be a relatively simple task, but it seems that I am bad, or overlooking something simple.

  Hi Chknrckd,

  Also what could be the problem, is that the way hyperterminal sends characters (when you type words). LabVIEW will send a string at the same time, while that hyperterminal sends each character at a time.

  More information can be found here:

  Why Test panels MAX works my Instrument Serial in Hyperterminal but not in LabVIEW or VISA work?

  http://digital.NI.com/public.nsf/allkb/171D2D70CFB66E74862571390062D12B

  I hope this helps!

• External hard disk appears as "VMware USB Device", cannot access Windows Explorer

  Hello, recently my external hard drive appears as "VMware USB Device" when I plug it in, and the drive appears in Windows Explorer as it used to. I have it plugged into another computer and I can access... what needs to be done for me to use this drive again? Thank you

  It appears in diskmanagement? -If yes - did assign a drive letter?

  We need to know what host and WS-version you use as the behavior has changed recently

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• I can connect my Android device on my Outlook account but not with Thunderbird. What do need me for Thunderbird to connect to an Outlook account?

  At the office, I have Microsoft Office Outlook 2007 is installed. My PC connects to an area of the company that runs on Microsoft Windows Server 2008. I use Thunderbird on my laptop to connect to my Outlook account. How can I do this?

  In view of the fact that they appear to be a Windows-using exclusively organization, it is most likely they use MS Exchange.

  Thunderbird uses Internet POP, IMAP and SMTP standards. MS Exchange can use these but the admin has failed them. It is possible that your e-mail client Android has the possibility of using a Microsoft proprietary protocols to work with Exchange.

  If standard protocols are not available, you can use the Davmail modules or Exquilla in Thunderbird so that it can appear to be an Exchange-compatible e-mail client. I use Davmail successfully on my place of work.

  Keep in mind that if they do not POP etc., it is unlikely that they will allow external connections to internal e-mail accounts. The usual ways to allow such connections are VPN or OWA.