USB and Wi - Fi

Similar Questions

• iPhone 7, lightning, USB and 3.5 jack

  Hi all

  Does anyone know if a connector for iphone 7 will be available with 2 outputs: USB and 3.5 Jack?

  concerning

  http://www.IMore.com/how-charge-your-iPhone-7-and-listen-headphones-same-time

  more

  headphones iPhone 7 and charging

• B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

  Presario CQ57-400SO.

  I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

• HP 50 g - PC connection series with adapter Series USB and null modem troubleshooting

  I have the calculator correctly connected to my laptop via a USB series adapter, which is plugged into a null-modem adapter, which is plugged into the serial cable sold on HP Calc.org specifically for the HP 50 g. I started XModem on the calculator, but Conn4x found nothing. Is the process different from that used for USB and Conn4x connections? The problem could be with the USB Serial Driver. I use the default MicroSoft driver installed to connect? Are there tests I can run to determine if the adapter is broken, or the computer or calculator. Thank you very much in advance for your help!

  I already tried the following:

  • The two indicators relevant system are correct for the serial communication
  • Tried to reinstall the driver
  • Google for any relevant information that is extremely rare
  • Tried with two Xmodem Kermit servers running on the calculator, press 'Connect' on Conn4X.

  Hi!, Ranothil:

  If you have the following cable "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, all

  data, HP50G, to the PC and vice versa, throughout the connection Kit (Conn4x), without issue.

  Please, see this link, to education, to transfer data with the serial null modem and connectivity kit cable... http://sense.NET/~Egan/SKB/ or... http://www.hpmuseum.org/cgi-sys/CGIwrap/hpmuseum/archv017.cgi?read=125259

  Note: best if you transfer data, HP50G, PC and vice versa, through the microUSB.

• Best external hard drives with usb and 2 crush

  I plan to buy an iMac 27 "and looking external hard drives usb and lightning which can be chained. The cie has some on apple's site, but do not have good reviews. Technology g g download reviews good enough readers. All of the suggestions.

  Have you looked at OWC? I have several of their readers, but mine are not Thunderbolt - they are either FW or USB3 or both.

  http://eShop.MacSales.com/shop/external-storage?_ga=1.37930981.756347728.1456539 978

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG

• Wireless, lan usb and pci is not installed

  Hi, I just bought a new g001sx 15 HP and installed Windows 7 Professional 64 bit. After you install the operating system of my lan wireless, LAN, USB and PCI devices is not installed, I don't know what to do. installing drivers atheros already tried and it didn't work. I have already inserted an image that shows that some of my drivers are not detected.  Thanks in advance.

  Hello:

  Here are links to the drivers you need...

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  This will install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then, install the beta amd radeon catalyst graphics driver.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Ethernet controller: DL and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  PCI device: DL and install driver 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  In order to provide me with the wireless driver which you are interested, please do the following...

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Cand recognize my usb and ISo

  Then installed ISO Windows 10 on their site so that I can bootcamp it.

  Ive done everything I plugged my USB and after my download finishes and let Mac finish the loading of my USB,.

  I opened BootCamp and clicking Next until I got here

  After that, I didn't know what to do and my office is my USB recognized and my Windows 10 ISO it

  Someone Pls help me...

  Specifications of the computer:

  

  Your 2009 iMac has an optical drive (CD/DVD). You can install Windows- only with the help of a physical DVD, USBs will not work.

  1. Please download the ISO (32 - bit or 64 - bit, if any) you need to https://www.microsoft.com/en-us/software-download/home .

  2 burn a physical DVD to help disk utility (Yosemite): burn a disc image on a CD or DVD .

  3. run BCA and use the Windows installation DVD.

  4. be aware that your iMac is not supported by Apple for W10 - use 10 Windows on your Mac with Boot Camp - Apple Support .

• Satellite P10: Controller USB and IEEE 1394 do not work after WXP re - install

  Does anyone know how to fix this problem?

  I recently reinstalled WXP home on my satellite p10 computer laptop and then installed all drivers and utilities from the support CD that follows with Notepad.

  Everything works except for USB and Firewire.
  Very strange screen system shows me that I have bad driver for usb controller, but when I run the utility chipset problem remains. I even downloaded the drivers on the Toshiba support home page in the hope that it would be a different version and they would work, but nada... same problem persists.

  Someone knows how to solve this problem, or what is suitable driver for the controller USB on satellite p10 554 and where can I find this driver (without the entire chipset utility?)

  Thank you in advance for your help!
  David

  Hello

  the funny thing is that USB is IN the chipset. The problem is that you can extract some drivers you need, given that utilities chipset intel are a complete set.

  So, I suggest you go to the website of intel (www.intel.com) and then download the chipset utility. Don t forget to update your windows (Service pack, updates, bugfixes) because the operating system has sometimes problems with the hardware installed, then an update will solve this...

  I hope that you have little luck with the original software of the chipset intel.
  Give a few comments after completing the makings and let us know if it worked.

  Good bye

• Insulator usb and GPIB-USB-HS

  Hi all!

  I'm trying to control a range of aglient with a labview program.

  everything works well, but for my application the scope must be one reason other than the computer.

  so I bought a usb isolator: http://www.bb-europe.com/product_family.asp?FamilyId=651

  but when I plug the reach through it, it is no longer recognized by windows. If I plug the GPIB-USB-HS only, it is not recognized nor.

  GPIB standard speed is 1.8Mbits / s, so I chose the UH401SL (low speed), and the GPIB-USB-HS is compatible with USB 1.x, so for me it is not a problem of transfer speed...

  any ideas?

  THX

  Power would have been a problem, but the speed was probably just as well. The GPIB-USB-HS is designed for USB 2.0 high speed, but also works with USB 1.1 Full Speed(12 Mbits/s). It is not designed to work with USB Low Speed, because most computers with USB implemented USB 1.1 or later. It is virtually impossible to find a USB port that does not support Full-Speed at, but apparently this insulator is an exception. Low speed is usually reserved for devices with needs bandwidth close to zero, as keyboards.

  I must also point out that the maximum speed of the GPIB-USB-HS is 1.8 MB/s, which is of 14.4 Mbps, before taking into account overhead Protocol USB or traffic from other USB devices on the system. This puts a little above the capabilities of Full-Speed USB, and much more than can be supported with USB low-speed.

  -Jason S.

• Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.

  Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?

  try to reinstall the Intel chipset drivers:

  http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%

  Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.

  or

  Press the logo windows + x

  Choose Device Manager

  Click controller series universal

  Right-click on the Intel USB controller, and then choose uninstall

  Once done, reboot and wait windows re - install the drivers

• Want 5540: Connectivity, can I use want 5540 USB and wireless on two nearby PC win 7 and Win10

  Can I connect the envy to one not wireless pc (Win 7) USB and a new PC wireless Win10. A single pc in use at the same time...

  My HP C3100 unit is old and broken, sounds like a cement mixer, but still trying on USB only.

  Hello

  Thank you for using the HP forum.

  The answer is 'YES '.

  Just make sure that you download and install the software (with the correct operating system) on each of the PCs.

  Hope that helps!

• USB and DVD not recognize anything it shows that peripheral unknown.

  Original title: USD/DVD does not work.

  my USB and DVD does not recognize anything, it shows device unknown and does not work.

  Hi alexandrebernat,

  You did it all change hardware or software on your computer before this problem?

  For the question USB, you can follow this link & check if it helps.

  USB port may stop working after you remove or insert a USB device

  Reference: Troubleshooting tips advanced to General problems USB in Windows XP

  For the CD/DVD drive problem, you can follow this & check if it helps.

  Your CD or DVD drive cannot read or write media

  Reference: How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.
  Please post back and we do know.

• Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless.

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  loudford73 wrote:

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  Hello

  If the instructions that you need a cable then you need a cable. On several printers now, you don't need USB cable for Setup (that's why many boxes do not have) and you can run the installation on your computer or a button on the printer.

  Kind regards.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658