USB connection problems

Similar Questions

• Install HP Officejet 5740 & USB connection problems

  I recently bought a HP all-in-one OfficeJet 5740 printer for my desktop Dell XPS 8700-(Windows 8.1) and attempted to install, using the USB connection option. I was informed by the instructions of configuration to go online to a Dell website for the latest version of the installation software to download if I had access to the internet. I have DL'ed software and it apparently installed OK-(aucune erreur ou quoi que ce soit pour indiquer qu'il n'a pas abouti). Once finished with the installation of the software, I got to the window option connection-(wireless, usb cable ethernet cable). I chose the option of usb cable, however after having to then connect the USB cable to the printer and the computer via the usb cable, it tries to connect, but alerted me, stating; "Failed connection to printer, printer was not able to connect successfully via the usb cable. I tried this several times-(par moi-même et remote assist avec Support ordinateur Dell). I had the same problem last week when he tried with my old HP Officejet 6100, which I wanted to replace. I ran the program of doctor printing/scanning HP on the 5740 and it lists the printer and the software installed, however the HP printer install lists assistant the complete software package for the printer is not installed and some basic features drivers may be missing or damaged. Also when I go into Control Panel, then devices/printers, it displays the icon of 5740, however after rt - by clicking on the printer icon, instead of the regular menu that comes up to the top-(showing the complete properties, select this printer as the default printer, etc.), it displays a menu of smaller selections very-little (who don't understand not the "select as default printer"). I tried downloading the printer software two ways-(via the HP website on line 1, and then click the installation CD supplied with the printer, the same results. The printer was purchased 11/15/2014 and seems works very well-(tirages test-page, page d'alignement, etc.), but I can't print anything, and apparently it can not connect via the USB-(* j'ai acheté un nouveau câble usb 2.0 hier et, utilisé pour écarter la possibilité d'avoir un mauvais câble). My Dell computer is only 10 months old, and I upgraded to 8.1 Windows back on 25 October.  The USB ports on the computer all seem to work properly when connected to another USB device other than the 5740 printer.  What is the software apparently is not fully installed, with some missing drivers or, possibly, USB drivers should be updated? Any help would be appreciated. Thank you!!!

  Thanks for responding, but I was able to get the printer installed with the help of diagnostic, remotely in line with my computer manufacturer support staff. He was determined to be a software problem because of a recent update of Windows 8.1. Thanks for the effort!

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• USB connection problem

  Whenever I connect my tab to any PC or laptop using the USB cable, it is not connect. It is not pop window on the USB connection. USB port works fine. Tab gets charged through this property. Functional disorder it is. Everyone will solve it?

  Hello and welcome to the HP support community!

  Need a few details.

  What tablet you are asking about?

  What OS is on your PC?

  Tried another cable?

  Usual suggestion is to unplug the devices and reboot the computer and tablet.  Check the settings of the tablet in storage/settings / < icon options, top right - looks like 3 blocks stacked vertically > / USB connection to the computer.

  See if the PSG is checked.  It is suitable for the transfer of all types of files.  Connect the devices.  If still no joy, try to uncheck MTP and PTP.  This should make the Tablet appear as a camera.

  I had to do with an old Win XP computer so that he can "wake up" and make the connection.  I then switched to the PSG and all was good!

  WyreNut

• Satellite L50 - USB connectivity problem

  Hello, new to these forums and just buy a Toshiba Satellite L50.

  The problem is when I connect my iPhone in a few seconds it will disconnect, reconnect, disconnect plug. Then a pop up according to sleep and fresh loan, then another pop up will say choose what to do with this device, and then it will disconnect and reconnect etc. and loop messages and connection.

  I disabled sleep and even cool thing. I allow it and put the laptop to sleep and I can charge my phone and it is not disconnect and reconnect.

  For the moment, I turned off the iPhone into Device Manager and its load although if I try and allow him to do as stated above.

  It is not a problem of windows I Linux out there, and it will do the same to connect/disconnect. "Buzz-buzz" vibrating door very quickly.

  It is not the phone or cable as these work well on another computer.

  So can anyone explain what this problem and how to fix it.

  Footnote: BIOS Version 1.90

  Thank you!

  Hello

  As far as I know the laptop supports different USB ports.

  Have you tried to connect the smartphone on different USB ports?
  If this isn't it.

  More I recommend you to check the parameters of each device to save energy.

  In-> controller device manager USB-> properties-> last tab (power management)

  Here you will find an option to turn off the device to save power.
  This option should not be enabled. In the event that the option is checked, remove the mark.

• Win 7 USB connection problem disconnect/connect Cycl

  Is anyone else having problems with their Droid Turbo and a Win7 PC connection? I got my first camera at the end of November. When I initially plugged on my PC, the AutoPlay of Windows kept popping up window and the device would be cycle as if it had been disconnected. The AutoPlay window closes never alone, and I need to close from a few to several 10s of windows (based on how long I left it plugged in).

  I was able to get a stable connection after installing the Motorola Device Manager software.

  After a problem without report, Verizon has replaced the original phone with a new phone. The new phone is the same cycle of disconnection/reconnection anytime it is plugged. Software Motorola device Managger says that the software is up to date.

  I connected the phone to a Linux computer and had no problem copying files back. The connection is remained established until I got the USB cable.

  I rebooted the phone and the PC several times that I care to count.

  Also has anyone seen this problem? More importanly, does anyone have a solution?

  My phone (in MTP mode, without debugging) shows that the VIDID 22 b 8: 2ea4. On several occasions, I saw the PID also be 2ea5 and 2ea8. (Maybe it's with debugging on, perhaps a PTP mode).

  A few times, the device is presented as "Unknown device" with no details in the Device Manager.

  I plugged the phone in each USB port on the computer.

  If I knew that the files to remove from Windows to replace the driver I'd do it. If I knew that the right driver I tell Windows to use. So far I have not found one that works.

  Thank you

  James

  James best would be to connect the device in MTP, USB OFF debug mode. In Device Manager, locate the device and click on uninstall. At the prompt to uninstall to make sure that you CHECK DELETE the driver software. Uninstall device of motorcycle, bike mobility Manager drivers and nothing of another "bike Mobility" brand. I use a disc cleaner (ccleaner) delete left over remnants of uninstalled product files. I first do a system cache/clean and repeat several times until the cache gets up, nothing to remove. After that it's over, I run the registry cleaner. After scanning, select "Questions of difficulty" to the quick click reg backup YES, choose a SAFE place 'FIX ALL '. Once done, repeat until there are no more problems found. After all this is finished, STOP, do not restart. Computer to start up, run CCleaner again just to make sure everything is clean, so before you plug in your phone, go to and install Motorola Device Manager/USB Drivers. Let the full install and reboot. In developer options, revoke the authorization of debugging. Connect the phone in MTP mode to the PC and let Win7 to install the drivers. Change the connection of the device to PTP repeat, then finally change device USB debugging and let windows install the drivers. Let us know if this helped or hurt.

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.

• HP 1515: Deskjet Ink Advantage 1515 USB connection problem win10

  I bought yesterday hp1515.and the many ways as stuck in connection.i tried usb configuration (disable startup all the apps, buy a new gold usb sales-man who gave me), but still nothing is happening...

  now what?

  I solved the problem on my own... windows 10 prefer HP DESKJET 1510 SERIES DRIVER that does not work.

  you have to manually put HP DESKJET 1510 SERIES DRIVER CLASS to work

• Usb connection problem scanner Fujitsu fi-6230

  Hi, im trying to connect a scanner usb (Fujitsu fi-6230). I installed ISIS and Twain driver (HP Compaq 8300 - Windows 7 x 86) host and the vdi (Windows7 x 86). The client is version 5.1 and I tried with PCoIP either with RDP (as far as I know do not support scan usb). The scanner is recognized by the host, but in the virtual is unrecognizable device not even as being unknown. There is no restriction for usb redirection in the display manager. I have uninstalled/installed Vmware USB Host controller, but did not work. Do I have to activate the GPO by default DC on RDP redirection? Can you please help, I don't know what is happening.

  Thanks in advance

  Well thank you for the help. No upgrades have been made. It was a new image. A windows 7 OS has been installed and has been optimized according to best practices of vmware. After that, the appropriate vmware view agent has been installed. The same agent was installed in another image whose behaviour is normal.

  I found this: https://communities.vmware.com/thread/440975 I did the quickprep instead of sysprep operation. I'll try the 2nd recommended method and I'll let you know the Message was edited by: alipkok

  After the 2nd solution, the problem seems to be resolved. I reinstalled agent version 5.0.1 - 640055. Thank you message was edited by: alipkok

• Satellite C660D - 10 p - USB connect problem Windows 7 64 bit

  Hello!

  USB drive is no longer recognized shortly after the start.

  According to 'Unsubscribe' or 'Edit user' still OK, but even for a short period.

  Have no USB Updat to Toshiba, a controller failure will probably be.

  Can anyone help?

  Harald greetings

  Hi Harald

  Can you please tell us what model of laptop do you have?
  Are you using the original version of OS that you got with your laptop?

  Maybe I didn't understand the description of your problem, but I imagine that the USB ports do not work on your laptop satellite? Right? have you tested with different USB devices?
  When you open Device Manager you will see some unknown devices here or some hardware issues?

• Need help to test the VISA interactive Control: Sorensen XBT32 - 3FTP USB connection problem

  Hello

  I use Windows 7. I installed the USB driver provided in this link:http://www.sorensen.com/products/XBT/XBT_Downloads.htm.

  Max is on the ASRL5: COM5 series & parallel in the Device Manager it is listed in the port: COM5

  I don't know how to test using VISA interactive control to ensure that the connection is established.

  Here are the parameters:

  Serial settings:

  Baud rate: 38400,

  Data bits: 8

  Stop bits: 1

  Parity: None

  I use the default settings for the other options such as flow control: none, Timeout = 2000ms etc.

  In the attributes view tab:

  Attribute: is the connected port

  Current value: error VISA: (Hex 0xBFFF001D) the specified attribute is not defined or supported by the referenced resource.

  I don't know if it's important.

  When I write * IDN? \n (bytes to read: 6), I return the Count: 6 bytes

  When I click on "Read Status Byte":, I get the following error:

  Error reading STB operation VISA: (Hex 0xBFFF003A) cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).

  If I click on "Query", I get the following error: reading operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  I also tried to create USB raw driver help driver of VISA Assistant. In this case I kept getting timeout errors: read operation error VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Can you please tell me what I'm doing wrong?

  Thank you.

  Who cares about the number of bytes written? And configure the windows com port is not relevant. What is important is how you set the com port in the VI or max.

• USB connect problem w / photosmart b209a-m

  At the back of the printer where the usb cable connects to the printer for the final synchronization for wireless use, one of the pins broke.  There is another set covered by a black plastic shield that looks like a jumper. Those that will work?

  OK, lets use WPS to connect the printer to the router.  This will work as long as you use NOT of WEP as wireless security.  If you are, change because it's not safe.

  First of all, on the printer: Setup > network > start WPS (Wi - fi Protected Setup).  Select setup button if she asks.

  Within two minutes of this, press the WPS button on the front of the router.

  Your printer will tell you when it is connected.  Then all you have to do is to install the software.  It will not ask for a USB cable to be inserted.

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Satellite Pro A100 with Modem USB internet connection problems

  Hi all

  I'm looking for some help with a problem. I am struggling to solve. I have a Satellite Pro A100 and sometimes use it with a speedtouch 330 what ASDL USB connected modem, but whenever I use this at some point that I seem to lose connectivity, the Explorer does not display the pages and other applications stop working, even if I do not seem physically the connection loose. It is often the only to get back on the net to restart and start over.

  The modem doesn't seem to be the problem as it works very well with my desktop and the laptop works very well when it is connected through wireless and idea and solution would be greatly appreciated.

  Sean the Bear

  Maybe you should take a look here in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31982&TSTART=0

  There is a user who uses the same modem SpeedTouch 330 USB on laptop with Vista OS.

  You will need to install compatible drivers on the site of modem manufacturer.

• HP Deskjet 970Cxi: HP printers - install another driver in Windows 7 to print USB connection cable - PROBLEM

  Hi - I have a HP Elitebook6930P running Windows 7 Ultimate x 64 and a printer HP Deskjet 970Cxi with a USB connection.

  I try to get printing to work.

  There is a 970Cxi pilot in the laptop, but it won't work.

  HP have a support document - "HP printers - installing year Alternate Print Driver in Windows 7 for a USB connection cable" - and I tried to follow this exactly a number of times without success.

  The problem is that it is inaccurate and contains instructions that do not work and refers to procedures that do not exist in Windows 7.

  Therefore, I have no success in the conclusion. I can not communicate with HP for assistance, or no explanation as to why their document will not so blatant.

  Can anyone help please?

  This widget could not be displayed.