USB drives are slow to respond

Similar Questions

• USB drives are still at the stage of editing on my computer

  I am currently using a box of HD10 Storeva (10-drive HARD USB Bay, using ASMT1053E controller, looks exactly like Century model, without the sata port). I used all 10 disks that are mounted on separate directories, but after a bad reboot (power off the front discs than windows), I can't get more on the computer (it's ok on other computers).

  Using only 1 drive, here's the current state:

  -After cleaning the attachment points (mountvol/r) and deactivate the automatic mounting (mountvol N), my computer is able to see the disc (mountvol, diskpart or diskmgmt).

  -as soon as I want to turn up the volume existing (letter to assign to the partition path), the disc is still running (> 12 h) and freezes Explorer.

  -J' have reinstalled the drivers USB (USB controller uninstall and delete infcache.1), reconnected the pilot, but the same behavior occurs.

  On other computers, the disks work properly.

  Any idea what is wrong on my computer?

  JL.

  Hi John,.

  Thanks for posting your query in Microsoft Community. I appreciate the steps you provided.

  I suggest you to run mountvol/r this again removes the volume mount point telephone and registry settings for volumes that are no longer in the system, preventing them to be mounted automatically and taking into view of their former volume mount point (s) when you add to the system.

  After that, run the mountvol/e which re - allows automatic mounting of new basic volumes.

  If the problem still persists please post your request in the TechNet forum using the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• Cursors in the development in the latest Lightroom module are slow to respond

  I've updated to the latest Lightroom and my problem is not as bad as some. However, it's boring.

  When I click on a slider to move it, the response is slow, and sometimes I have to click it a second time to get attached to my cursor so that I can move it.

  The other problems that people seem to have is caused by the graphics processor. But here, I have a Quadro graphics card and whether or not the gpu is enabled or not makes no difference.

  I have a lot of memory and eight processor so I don't really think there is a problem with my pc. Any ideas?

  Hello

  The version of Lightroom is that I downloaded yesterday. Howevr I just uninstalled and reinstalled Lightroom and now everything seems in good condition. The sliders are responds ok. Thank you

• Documents on the hard drive and USB drives are automatically sent to the trash

  Why are some of my documents (files) on my hard drive and external drive is sent to the trash without my consent.  Is there a virus in my Mac the cause? If so, how to solve this problem?  Only selective files are sent to the trash for deletion after a reboot.  It seems that my computer has been taken to target.

  Mac Book Pro (to 2011)

  OS X EL Capitan to. 10.11.3

  8 GB memory

  Thank you

  DJE B

  How many times do you get? What are the documents?

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• Not able to copy files on USB drives.

  Original title: hp v165w USB Device

  I bought 2 separate USB flash drives to copy files to each of them seemed installs successfully but then when I want to copy or drag a file to it, my computer tells me no device doesn't exist and please insert a disc into drive F. But USB installed in drive E, Ive tried to do a shortcut for on mmy desktop USB and drag files into it, but it gives a red circle with a line through it, indicating that it is impossible. Please help me understand what to do!

  Hi mrsstacysmith,

  Thanks for posting in the Microsoft Community Forum. As you are not able to transfer data in USB drives, try these methods and check:

  Method 1:

  To verify that USB is causing the problem, try connecting a single USB key and then try to transfer the files from the computer and check if it works.

  Once you get the confirmation, try to connect to the second USB and try to transfer the files from the computer and check.

  If the second USB shows the same error as mentioned try connecting to another USB port and check.

  Method 2:

  Check if USB drives are detected in the Device Manager.

  a. click Start, Type Device Manager in the search box start and click on enter.

  b. expand Bus USB controllers and check if the device is detected.

  c. double-click the device and check if the device status says device is working properly.

  Also check if the USB drive is detected in disk management.

  a. click on Start, Type diskmgmt.msc in the start search box and click on enter.

  b. check if the USB is detected as a drive.

  Visit this link for more information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• WAG310G - usb drive

  Hello

  Why some usb drives are not displayed under "storage" on admin the WAG310G browser-Soft when it is attached to the usb port on the WAG310G? Are there special requirements - or the discs must be specially formatted?

  And when I see a disc usb browser-app, is it possible to access also the player directly from a Windows XP machine (for example in windows Explorer) and not only through the WAG310G browser interface?

  Thank you

  Peter

  FAT/FAT32 file system is supported by WAG310G.

  This particular model not (WAG310G), you can't access the drive in windows Explorer. Need to connect to the router interface to access the drive.

• X220T EXTREMELY slow when you run OS USB Drive

  Hello world

  I searched high and low on this site and many others trying to understand what could be the problem without success. I am owner of a multitouch i7 8 GB X220t with the stock 250 GB hard drive. I've only had the 250 GB because I had planned to upgrade it, but then wouldn't spend the price exorbant for a drive of 7mm at the time of the purchase he treats so any type of. in any case, my unexpectedly crashed the other day, complete HARD drive clicking noise, not light with an external USB Sata or anything, I'm currently in St. Kitts (teaching of medical students) so I have a little wait until I can a new (600 GB Intel SSD!) so I tried to run ubuntu on a USB (I have a 32 and 64 GB once are supposed to be 'super speed' or something else transcend the) brand).

  Here's the weird part, when I run from the installation disc, using live cd, everything works super fast, MUCH faster than putting out the HARD drive and I thought that was becase the disc sports a (and I compared the other day) read and write speed 130mbps 150mbps. But now, whenever I have to install the OS on a disk (partition ext2 not logged or hell I even tried Fat32) the BONE becomes unbearably slow, gel for even the more meanial such as logon or typing or anything like that.

  Does anyone have AN idea why this happens? Is there a driver? or Bios problem?

  I want to save more than 8 GB of memory persistent on my 32 GB stick, and I have this situation for the next month, so please, any help is appreciated.

  Running an operating system on a USB stick is really slow because the USB ports are not very effective to transfer data.

  Now, if you had an ExpressCard with USB 3.0 ports and a USB 3.0 drive, you might be able to keep up reasonably well. I have not tested it myself, but the difference in the execution of a backup of my external SATA 3, 3 USB, HARD drive is incredibly fast compared to use it via the USB 2.0 connection.

  This could be worth in the future, considering you can get a USB 3.0 expresscard shell, disk HARD SATA 3 and 54mm, for cheap, close but not also have the security of the backup feature of cloned drive and rigour, the ability to run your entire operating system off the external drive.

  I forget exactly what I paid for that Setup, but I think the 750 GB SATA 3 was about $ 80, the expresscard (with two USB 3.0 ports) was about $ 40 and the sata 3 capable external tank designed for USB 3.0 and disk of the laptop was about $35. The external hard drive it's thinner than a pack of cigarettes and only marginally more wide/plus. The weight is also surprisingly little.

  Anyway, that might not help much now, but it would be a convenient emergency backup in the future, and it is fairly simple to put up with some software like Acronis offers.

• Why are external USB drives not considered "Devices with removable storage" by Microsoft Windows Vista Home Premium?

  Readers USB Flash RAM, CD drive USB, readers of CD - RW USB, USB DVD +-RW drives and DVD-ROM USB readers are all handled by Microsoft Windows Vista Home Premium as "devices with removable storage".  To check this, look under the "Computer" entry in the menu 'start '.  However, if one uses as a USB external hard drive, that one is listed under 'hard drive '.  Programs noticed this, and some of them refuse to use it as a removable media drive, even if it is technically removable media, with its electronic and all.  It's kind of weird, because you can't remove the RAM on the USB Flash memory drives either.  Is there a way to get readers to external USB hard drive listed under "devices with removable storage"?

  -Yekta

  USB hard drives do not seem material RMB (removable media bit) bit set.

  I tried to format my external drive scratch NTFS (it has been formatted in this way, but I have re-formatted to ensure that), and it always happens as "Local Disk".  Also, I put the "Optimize for quick removal" option on the parameters of the disk driver hard software.  Which doesn't change anything either.  It came even as "Local Disk".  Finally, I formatted the drive with the FAT32 file system (use some flash drives).  The drive still shows as "Local Disk".  In the tests described above, I still "withdrew safely" the disk first and then re-connected.

  Thanks for the help, I now know it is a bit material in the electronic control unit which controls special registration of the drive in the operating system.

  -Yekta

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Peripheral USB MTP are impossible to install. Error: «device driver has been not correctly installed...» Code 31 ".

  I tried almost every answer nothing is done online.

  Both my Canon T1i and my Nexus 7 Tablet does not connect to my office. Raise them the same error message: device driver has not been installed with success, usually with the error "code 31". My laptop has no problem to connect to two devices, and both are on Windows 7. All USB devices non - MTP, as devices and thin USB drives work.
  I tried to uninstall/reinstall device drivers, as well as my host USB in Device Manager. I also looked in the upperfilters registry, but they aren't there. I don't know if it's important, but my Windows operating system is on a different drive than my account "User". I am very close to reinstall my computer.
   
  Original title: any = s MTP USB device failed to install

  Sorry, I'm impatient and re-formatted by the operating system. Works fine now, if it happens again, or determine the cause, that I re-post.

• 8.1 Windows Media Library problems because there are read errors after removing the USB drive

  Whenever I plug a USB key with music on it; It gets automatically added to my library of players. Then when I remove the USB key; I left with a lot of read errors. How can I get my USB drive does not automatically add its contents. I set AutoPlay, even not use. This never happened with Windows 7.i do not know what they changed to do this.

  Hello Chris,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur either because of bad parameters of Windows media player.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Resolution of the problems of Run Windows media player library and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'Windows Media Player library'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Database rebuild Windows media player and check. Please follow these steps:

  a. press Windows + R key, type %LOCALAPPDATA%\Microsoft in the immediate window and press ENTER.
  b. Select the "Media Player" folder, right-click on it and select delete.
  c. restart Windows media player.

  Note: Windows media player automatically rebuilds the database.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Vista desktop right click Menus slow to respond

  From: Patrick Ryan

  Hi, my Vista Home Premium desktop is very slow to respond to right click and bring up the menus, the same for the icons or files that I did a right click on the desktop.  How to rectify? Thank you.

  From: Malke

  Problems with right click are often caused by third-party programs that move on the shortcut menu. The best way to handle this is with ShellExView free program:

  http://www.NirSoft.NET/utils/shexview.html

  Make a right-click is slow or weird behavior caused by managers of context menus.

  http://WindowsXP.MVPs.org/slowrightclick.htm

  Manage the entries in context menu for folders, drives and objects of a Namespace-

  http://WindowsXP.MVPs.org/context_folders.htm

  Malke

  --

  MS - MVP

  Elephant Boy computers

  www.elephantboycomputers.com

  Don't panic!

  Another response of the community of Windows Vista discussion groups

• Download tool Windows 7 USB/DVD - bootsect USB drive error - desktop windows Home premium 64-bit

  So I get the bootsect error when you create a windows 7 Professional 64 bootable USB key when the machine I'm using is windows 7 Home premium 64-bit! Anyone know what is happening here?

  Thank you

  Hello Hardwareeingineer,

  Thanks for posting your question on the forum of the Microsoft community.

  According to the description of the problem, it seems that you are facing problem creating bootable USB drive. If you get the error bootsect so I recommend you follow the suggestion provided by Sanketp responded on July 4, 2010 in the following thread.

  Problem using the USB/DVD of Win7 download tool (concerning bootsect.exe)

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Computer performance are slow and unresponsive in the middle of the running applications

  Original title: Volsnap error, VSS, registry handle leaks, the drivers won't load is not etc.

  Little by little over the last few months, my computer has been slowing down, suddenly "not responding" in the middle of a program and a few other oddities.  I can't identify when this started because he was progressive.  I had to replace an old drive SSD C and when I did, I also bought a new copy of Windows 7 Prof 64 bit SP1.  Drive C is now SATA 6.

  Specs are adequate, CPU i7 930, 16 GB ram, 2 7200 1 TB WD drives each, 1 WD 'green' 2.5 SATA 6 GB, an Intel SSD SATA2 M225 and a Corsair Force SATA 6, which is the 'new' drive C.

  First mistake, as mentioned above is:
  Log name: System
  Source: volsnap
  Date: 28/08/2012-06:46:26
  Event ID: 8
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Flush and hold writes operation on E: has timed out while waiting for a written statement of the volume control.
  The event XML:
  
   
     
      8
      2
      0
      0 x 80000000000000
     
      131589
      System
      mg - PC
     
   
   
     
     
      E:
      000000000200300000000000080006C 0000000000000000005000000000000000000000000000000
   
  

  Following error, which is quite common VSS:
  Log name: Application
  Source: VSS
  Date: 27/08/2012-22:38:52
  Event ID: 12341
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Volume Shadow Copy WARNING: VSS past seconds 0x000000000000002b try to rinse and keep the volume \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\.  This could cause problems when the other parts in the cliché of the time-out value for the phase of release-written, and it can cause the creation of snapshots to failure.  Try again when the disk activity is less can solve this problem.

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
  The event XML:
  
   
     
      12341
      3
      0
      0 x 80000000000000
     
      73849
      Application
      mg - PC
     
   
   
      0x000000000000002b
      \\?\Volume{51e5830d-560C-4D2F-9ed8-343e5dbe5b8c}\
     

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
      2D20436F64653A20434F524C4F564C4330303030303239302D2043616C6C3A20434F524C4F564C4330303030303233332D205049443A202030303030323632382D205449443A202030303030353532302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
   
  

  Following error - register cast handles
  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/08/2012 20:07:49
  Event ID: 1530
  Task category: no
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: mg - PC
  Description:
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  The event XML:
  
   
     
      1530
      0
      3
      0
      0
      0 x 8000000000000000
     
      74995
     
     
      Application
      mg - PC
     
   
   
      Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles
  
   
  

  Next error - another problem of registry on the leak and be in use
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  Last error I hope - system boot or boot startup failed to load drivers
  The next (s) starting or starting system could not load:
  UimBus
  Uim_IM
  Uim_VIM

  I apologize for this long post, but I thought that some of them might be related, and I'd appreciate any help I can get like this had been a machine very good and fast until the last month or two.

  33000

  Hello
  The three files that does not loaded at startup proved a Paragon backup facility that I had deleted.  I found in the registry and is more had this error.

  Slow and sudden episodes of "not responding" continues in safe mode, safe mode with network and boot.

  Mr. Fixit noted that I had too many programs loaded on startup that I already knew and will work hard to stop.  It has been useful in this gave me a list of the programs that did not need to start.  Some of this list was a distant base such that suggests my AV does not need to start, but some of it was useful.

  I then started to keep track of programs that seemed more likely to slow down or freeze the machine.  I reduced to one of my drives 3 1/2 inch WD 7200 and my 25 M Intel SSD.

  I ran Intel SSD toolbox and it showed no errors and no updates.  Estimated of life was about 95% and I had the car for 2 years.  There is an option to click that says "SSD Optimizer", and I suspect it is similar to a manual pad because it is one of their first records.  I "optimized" and it was immediately faster.  Intel said to do once a week or two and I never did.

  I ran HD Tune Pro on the WD and it showed a bad CRC so that a warning on the drive, which is less than a year. HD air said the drive is bad OR a cable is bad.  I had a backup, Acronis Disk which took most of the data and I also had the cloud with versioning backup.

  Knowing that the food had been replaced by a technician who had twisted power cables, because most of the readers had been asked in reverse, I attacked this first.  I turned every drive so that the connection of the power supply has been on the same side and reconnect the cable after doing my best to straighten out and flatten the wire.  I then installed a new SATA cable on the WD drive in question.

  Then, wanting to be done with it once and for all and ensuring that I could save between Acronis and my backup of cloud, I used the command line in Administrator, then to Drive E tools mode, error checking.  I ticked the boxes: analyze and attempt to recover bad sectors and automatically fix file system errors.  A reboot and the process had started.

  When you are finished, I seemed to have a catchy machine and some of the programs which often hung, is done in two days.  Programs were pretty much intact, but most of the files had been erased from the disk.  I have restored all wiped files and files of Acronis and the cloud and everything seems to work perfectly.

  Unable to help me, I ran HD Tune Pro and made a mistake (not fast) full scan on the E drive.  She came back without error.

  I know that this drive can fail again, and above all, I couldn't have been this aggressive if I had not had 2 backups.

  Do you think it will fail again?  I decided that, if so, I'll get another SSD (or two) to replace.  Although it will cost you much, I fear that hard drives are not very well made and I don't want to go through this again - and maybe not be so lucky.

  Thanks for your help and I'll post again if it fails in the near future.  Someone knows something about the new SSD Plextor?  Or would you go with Samsung?

  Thanks again.