usb failure and slow drive superdrive

Similar Questions

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• Satellite L - system of start-up failure and no DRIVE in the BIOS

  HI all, my laptop for some reason any does not seem to think he has a hard drive installed, he said nothing in the BIOS for hard drive.

  I made the mistake of not to make recovery disks.

  Someone has an idea of what I can do to get this working again?

  Thank you

  Hello

  Looks like your HARD drive is defective because the BIOS doesn't recognize.

  I think you need to replace the HARD drive and reinstall Windows using the Microsoft installation disc. All the drivers and tools that you can download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• How to eject the disc from the drive superdrive usb?

  How to eject the disc from the drive superdrive usb?

  -Drag / drop the icon for the CD in your trash

  -Restart the computer and after the buzzer, press in and hold the left mouse button until the disc ejects.

  -Press on the button of your keyboard.

  -Click the eject button in the menu bar.

  -Press on COMMAND-E.

  -Open the Terminal app in your Applications/Utilities folder. copy and paste the following text:

  / usr/bin/drutil eject of

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Why can't I managed to install the iso file in my USB? I've tried different usb and hard drives and disassembled a lot or time usb but when, it comes up with an error copying the files on and it stops loading? What should I do?

  Why am I unable to download and copy iso files that need to go into the USB drive, it always comes up with an error when copying the installation files and none of the solutions have worked (some of the things I've tried are different from the USB, disassemble and repeat the download process windows files)

  You cannot use a simple USB as a source and destination. You must copy the ISO file (it's a single file, not the full installer) in your Documents folder and then run BCA to create a USB installation program. 2015 macs do not create a USB installation program.

  Please visit https://help.apple.com/bootcamp/assistant/6.0/ .

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

• Reinstall the USB controllers and USB drives

  Some flash drives did not work properly. So I uninstalled my USB controllers and USB drives from Device Manager. When I tried to reinstall, the Add Hardware Wizard cannot find the drivers, now none of my USB ports work. Help, please...

  Hi Paul,.

  Please run the patch from this link and see if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  For additional help, see:

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  If none of the suggestions above, you may need to reinstall your chipset drivers to fix the problem. Please visit the section of your chipset manufacturer support or your computer manufacturer's Web site for drivers.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Utility to stop smoking hard drive intermittently indicate that the hard disk is a failure and we need to get the data out of it.

  Scanned to find errors and told to back up my files, because I was going to have to drive failure.  He said WDC WDI 600JS-22N CB1 ATA Device Volume C:\ was the problem and my drive was going to fail. Run anothr says check my drive is healthy without problems. What should I do?

  Run the diagnostic software that you can download from this site:

  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  To arrange for a replacement disc if it is faulty. If the reader is installed in your computer when you bought it, and it might still be under warranty, check with the manufacturer of the computer. Also, it could be caught by a manufacturer's warranty. Visit the site of the manufacturer of the car.

  If it's to your advantage to retuen it to the manufacrurer for replacement, check to see if they will do a "hot swap". In this way, they will send you a replacement before you ship the defective drive to them. In this way, it is easier to transfer your operating system files and user to the new drive.

  Good luck.

  Tom Ferguson

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• USB Tethering (MiFi) and RNDIS driver

  Sorry, it's long.

  We test them and robust Dell laptop (Latitude E5404) and I'm working on it is about to pass to the user. They use 6620 L MiFis outside on the road usually attached.

  This * & ^) (thing # is NOT installed correctly.) I contacted Dell and Verizon for the sorted results, what has not happened.

  The situation: I plug the MiFi through the usb port. The driver begins to install. Initially, he said 'MiFi 6620 L' then converts to 'Remote NDIS Device sharing Internet' driver. Things seem to be going well until the yellow exclamation point appears and Windows will warn you that the driver installation failed. When you look at the driver in Device Manager, the details of the pilot show "the driver could not be started. Error code 10. »

  I have:

  ~ Uninstalled/reinstalled the driver
  ~ Uninstalled/reinstalled the USB drivers
  ~ Removed all software potentially conflicting
  ~ Tested the unit on a known working computer (Panasonic CF-30/31 with Win7 x 32-MiFi works great on old laptop)
  ~ Tested a working device known on the Dell (Win7 x 64 - same problem - cannot attach.)
  ~ Tried to select a different but similar driver via Windows
  ~ Will automatically search for updates of pilot
  ~ Checked for updates of the MiFi - it is updated
  ~ Scoured internet using a variety of search terms and not permanent
  ~ Ran CCleaner to detect that any transplant addicts who may have a negative influence on the installation of the driver
  ~ Tried on four USB ports on the computer
  ~ Ran SFC and chkdsk many times
  ~ Restored versions of BIOS all the way to the first
  ~ Review start-up control panel for all possible options that can have an impact on the departure of the pilot
  ~ Intel uninstalled and reinstalled devices
  ~ Copied the drivers from a known working computer, matching, no change
  ~ Performed a clean boot of Windows and the problem persists
  ~ Made an update of the plant on the computer and the problem with attachment occurs straight out of the door

  It seems that the driver should work. It can be installed anywhere. It is not intended to be installed like this. This is supposed to be plug-and-play.

  Dell nor Verizon really know what is happening. The information is to be transmitted to the network with Verizon engineers to see if they have additional ideas.

  So. Do any of you?

  In case someone falls on this in Google first, I thought, pretty well in my case, with the help of engineers from Novatel, a detective and good ol' ' trial and error.

  During the visit the Intel site, it is worth noting here and there that they use generic drivers. When looking for drivers who may be correct, many warn that they are for developers only.

  My current contention is that Dell has done something with the Intel USB 3.0 Host Controller generic driver that is not compatible with the MiFi.

  I downloaded this driver from Intel on a whim, try everything that seems reasonable in an effort to understand and here! It worked! I've also just done a factory reset and tested the driver again and again, it works!

  I am happy and finally happy to put this part of the preparation of the computer behind me.

  Thanks to all who have offered their insight!

• Is there a software that shows my processing of files and folders in the pc to USB or portable hard drives for many years?

  Is there a software that shows my processing of files and folders in the pc to USB or portable hard drives for many years?

  Thank you

  Nope, nothing like that is registered unless you have installed tracking software to connect it advances.