USB hub for myRIO

Similar Questions

• Time machine on a usb hub

  Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

  Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

  Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

  These hubs are externally powered? And what else is connected to them?

• Canvio Desk and passive USB hubs?

  I have Toshiba Canvio Office 5 TB HDD (HDWC250EK3J1).

  Manual says not to use passive USB Hubs, but given that this hard drive draws its energy from the wall socket, can I still use passive USB - Hub?

  Is it because it slows down HD or it causes real problems?

  There are situations where I would use passive USB - hub for a short period of time.

  So it causes losses of data or really bad things or what?

• USB HUB/Port

  Have Dell Inspiron 6000 laptop, Intel Petium (R), MProcessor 1, 6 GHz, physical memory 256 MB, win XP PRO.
  BIOS: Phoenix ROM BIOS MORE worm: 1.10 A09

  Trying to hang a Lexmark X 1270 All In One Printer for 2 weeks. Have no CD of the printer or the Wins service. (stolen) Got Lexmark cjb1200EN.exe, (USB cable) installed, ran, but I get regarding the installation of the software. The USB box continue does not illuminate. I searched and searched the Internet for answers/help etc...

  Click on system, then Device Manager,

                                
  USB controllers

   

  Intel (r) 82801FB/FBM USB Universal Host Controller - 2658 PCI VEN_8086 & DEV_2658 & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & E8

  Intel (r) 82801FB/FBM USB Universal Host Controller - 2659 PCI VEN_8086 & DEV_2659 & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & E9

  Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a PCI VEN_8086 & DEV_265A & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EA

  Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b PCI VEN_8086 & DEV_265B & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EB

  Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C PCI VEN_8086 & DEV_265C & SUBSYS_01881028 & REV_03\3 & 61AAA01 & 0 & EF

  Logitech USB WheelMouse USB\VID_046D & PID_C00C\5 & 7E16FA & 0 & 1

  Logitech USB WheelMouse HID\VID_046D & PID_C00C\6 & EF0EE98 & 0 & 0000

  USB Root Hub USB\ROOT_HUB\4 & 34FFDC66 & 0

  USB Root Hub USB\ROOT_HUB\4 & 150BE945 & 0

  USB Root Hub USB\ROOT_HUB\4 & 6A59CCE & 0

  USB Root Hub USB\ROOT_HUB\4 & 38190979 & 0

  USB Root Hub USB\ROOT_HUB20\4 & 30FD3CA & 0
  
  This also made > plugged in the USB cable between the printer and computer, open the Device Manager
  +? Other devices
  ?! USB hub
  When I unplug the USB cable from the printer to the computer, it goes.

  A ran Driver Detective and it come to this:
                                ALL OUT OF DATE
  * Hard drive.
  * CD/DVD-ROM drivers.
  * IDATA/ATAPI CONTROLLERS > Intel (R) 82801 FBM Ultra ATA Storage.
  * IEE 1394 Bus Host Controllers > host OHCI controller complaint IEDS.
  Network cards > Intel (R) PRO Wireless 2200 BG Network Corp.
  * Peripheral system (2) Intel (R) 82801 PCI Bridge-2448.
  * Bus universal controllers (5) Intel (R) 82801 FB/FBM Universal Host Controller-2658.
  DISCONNECTED DEVICES
                                                         
  3Com Meghertz-589F.

  Belkin F5D5020-PCMCIA network card.
  Digital camera.

  LOCOSTO.

  PCMCIA MTD-0002.

  RTL8187B_WLAN_Adapter.

  Sony DSC.

  USB device.
           
  I have Internet from Time Warner > & cable modem, do not use Intel or Windows to the Internet connection.

  If I reinstalled Wins. XP Pro would take care of what the necessary USB Hub for printer and drivers that I'm missing?

  Because I do not have the CD for XP gains and will not read the CD is possible to get it on the Microsoft Web site?

  HELP Please, what do I not right or isn't is required to repair/install what is missing?

  Thank you, morgan637

  If you have reinstalled win how did you so if you do not have the Windows XP cd?
  Is there a recovery partition, you were supposed to use to create your recovery discs not your Dell?
  Go to the Dell support site and ask for help there, the drivers can be downloaded from Dell

• I want to USB Hub with sync Ipad pro please suggest compitable for this device

  I want to buy power USB Hub with Sync to IPad Pro please suggest me the device appropriate for this work

  A powered hub will do, choose one.

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Windows does not start correctly when some multiple connection for external hard drive USB hubs are connected

  When starting, I have 2 USB hubs that connect to multiple external HD.

  If I disconnect the hubs, windows always starts very well.

  If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.

  Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?

  Any clue?

  Hello Patrick,.

  If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).

  Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.

  The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.

  Keep me posted.

  And thanks a lot for this.

  Kind regards

  BearPup

• Can I use USB hubs on cRIO?

  I would use the USB port on the cRIO 2 purposes. One for connecting to a USB key and another to control a small LCD 16 x 2 display. LCD screen will be updated very rarely but will give us a lot of read/write on the USB drive. I want to know if I can do this by using a USB 2.0 hub.

  Thank you

  I personally never did this, but everything I've heard of this material makes me believe that you should have no problem with that.  Adding devices USB COM can certainly be done with latest cRIOs running Linux, not sure of the compatibility.  I've also heard of others using a USB hub with several external storage devices.  I know also that the myRIO supports hubs, I've heard some work with a hub to support a USB ethernet and USB thumbdrive USB camera to a hub, which then goes to the myRIOs a USB port.

  What is your hardware?  What cRIO do you plan on using, this USB hub if you chose and what USB LCD screen.

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.