USB key are not displayed

Similar Questions

• FN keys are not displayed on-screen Portege Z30T-A

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5

  It is pre installed Win7 and I upgraded to:
  OS Microsoft Windows Version 8.1 Pro 6.3.9600 with their CDs.

  The problem is that the FN keys are not displayed on the screen.
  When I got my laptop under Win7 I would press the FN key and options would appear on my screen, it was great. But after a day, it does not display anything on the screen.

  How can I solve this problem?

  Post edited by: djemo

  Hello

  At first, I must say that the described issue is not a problem.
  Under Win8.1 Toshiba offered the use FN keys in two modes:
  -Special mode of operation
  -Mode of F1 - F12 standard.

  If you use open Win8.1 Please help Desktop > tools & utilities > system settings > keyboard.

  Here you can change the mode of function keys.

  Please test its operation.

• Dell: inspiron 1525 not boot from a USB stick, USB key are not not in the start option.

  Hi all

  I bought this dell laptop inspiron 1525 in the year 2008 with mentioned configuration:

  Core 2 duo processor

  1 GB OF RAM

  Due to some problems in my windows vista, I decided to install a new windows vista in my laptop. I run the dell support live cd at the start of my laptop and created the partitions on my system. But while the new installation OS on the cd i found that optical drive of my system does not work very well. so, I decided to install the new OS of USB. I went to the BIOS and selected the USB key in the boot sequence. but when I tried to install the new OS while pressing the F12 key, USB key is not listed in the start option.

  could someone help me to install the new OS in my machine? It is very urgent that my machine is down for 1 week.

  Please try attached BIOS changes screenshot than everything be useful to me.

  Thank you

  Gurpreet

  Hi Gurpreet,

  Thank you for your response.

  My apologies if I seem repetitive, but when you go to the Option of boot sequence in the system configuration screen, do you think that the USB storage device listed? And do you see a number in front of it?

  Go to the option for embedded devices and check if the USB ports are enabled or disabled. If disabled, change the option and enable the USB Ports.

  If this step does not help, go to the Maintenance option in the system configuration screen and press enter on 'Load Defaults'. On the side right, highlight 'Continue' in green, press Enter and then save & exit.

  Please keep us informed of the results.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Satellite C660 - USB keys are not mounted

  I have a * Satellite C660 with Windows 7 64 bit *. When I conect a USB stick (2 GB LG or other), Windows install the new USB, but after a few seconds, the USB is disassemble and assemble and disassemble some indefinitely.

  With my old * Toshiba Satellite M50, Windows XP * both sticks work very well.

  Hi mkobets,

  Probably something wrong with USB ports or driver chipset so the glue work with your old Toshiba laptop USB

  Means the simplest would update the chipset in my view driver that you can download here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• The State of function keys is not displayed on the screen

  Hi... Please help me.  I m havin lenova ideapad s10 - 2 netbook. In the present when I press fn + function keys action is performing, but his status is not displayed on the screen. So, if I want to spend on WLAN when I press fn + F5 screen does not appear. Usb devices are not detect my phone. Please help me...

  Thank you

  Hello and welcome,

  You can try to re - install the driver included in the establishment of lenovo

  cordially KalvinKlein

• Tecra A4 - USB keys do not appear in 'my computer '.

  I recently had to restore my TECRA A4 system after a disaster, since then, usb keys do not appear in 'my computer' and aren't available to use? However, they are listed in the device under usb devices Manager and hard drives?

  I updated the Bios and looked for the updated USB drivers, but nothing found?

  Hello

  Maybe stupid thing, but try it please follow: disconnect your laptop computer, adapter sector and battery and leave about 60 minutes. After only 60 minutes connect AC adapter / CC, start your laptop and try to use the USB.

  Please let me know what happens after that.

  By the way: check this http://support.microsoft.com/default.aspx?scid=kb;en-us;817900 document

• I did this, copied my iTunes from iMac to Macbook Pro folder, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... Is it possible to get my playlists?

  I did this, copied my iTunes folder of iMac to Macbook Pro according to the tutorial below, and my playlists are not displayed on my Macbook. My iMac has been reformatted since... It was my mistake, fitness before seeing that my playlists were not on my Macbook. Is it possible to get my playlists?

  https://support.Apple.com/en-us/HT204318

  Probably put you the folder in the normal position inside the music.  Launch iTunes while holding down the option/alt key and navigate to the iTunes Library.itl file in the folder that you moved.

• File, folder names are not displayed in my pictures folder

  Original title: file folder names

  Folder names are not displayed in my pictures folder

  Hi soren123,

  1. don't you make changes before the show?

  We recommend that you press the SHIFT key and change the folder view settings. To do this, try the following steps:
  a. open the folder my pictures.
  b. press the SHIFT key, right-click the empty space in the folder my pictures and change the display settings.
  c. continue to change the display settings until you see the name of the file or folder.

  See How to arrange files using folder in Windows XP views

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB key is not considered to HP PAVILION CORE I5 and MS 7613

  Hello

  I just got my new HP desktop HP PAVILION CORE I5 motherboard MS 7613 and im trying to install windows 7 without success, because in the BIOS the usb memory key does not START options. Don't see these settings in the bios to boot:

  Floppy boot priority group - not installed

  Group - HP DVD-RAM GH60L CD-Rom boot priority

  Group ST3100052AS HARD drive boot priority

  Network boot priority group - not installed

  More than that, I tried testing with two different usb sticks in different USB ports and the system could not start when trying to install windows 7. The two sticks were properly formatted and I have done some testing old NetBook of the mine and windows 7 have been successfully installed from two flash drives.

  One of my usb stick http://www.amazon.co.uk/PNY-Transformer-Attache-Flash-Drive/dp/B009J0HM94

  Second removable disk is named pro usb drive

  Also two usb keys are seen in the bios on the USB PORTS SETTINGS

  Any direction to help me to windows on my machine is very appreciated.

  Thank you, Bobby

  Check in the BIOS for Secure Boot settting_it must be disabled before the CMU machine can boot from any source in addition to the hard drive. Also activate the Boot legacy. Save & Exit.

  When starting with the USB key, press ESC immediately after turning on. This should bring up the boot F9 option where you use the arrow key to move to the low to highlight/select USB Flash. Press on enter.

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• USB keys do not work in my VISTA PC, but working in the XP computer.

  My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

  But I have several problems with VISTA.

  One of them is the following:-

  USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

  An external hard drive works perfectly on the same USB port. If the port is fine.

  Hello PG_eu,

  First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

  Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

  You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
  You can also go into the event viewer and see if you have errors on your hardware devices.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry Smartphones MemoPad entries are not displayed

  Hello

  On our employee's blackberry curve (software 4.5.0.186), its MemoPad entries are not displayed. When I go into the Options, the number of listed entries is 728, which certainly means she has 728 memopad entries right?

  There is no filter on the phone.

  She is using Blackberry Desktop Manager for Mac to synchronize notes and contacts from Entourage.

  How can I get these entries to show?

  Thank you!

  GGUSA

  Hello

  I think you can try two things: the soft reboot, and if it does not, the hard reboot. Don't worry, you can not lose data with these two reboots.

  Soft reboot:
  1) struck the following three keys at the same time:
  -Alt
  -Right shift
  -Remove
  (2) wait 2 minutes for the Blackberry to wake up.

  Hard reboot:
  (1) your BlackBerry smart phone is on
  (2) remove the battery and wait a minute
  (3) replace the battery
  (4) wait 5 minutes for the device to wake up.

  Please tell us if it works for you.

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.