USB printer (HP Laserjet 1012) is not recognized. Help, please.

Similar Questions

• Webcam stopped working says insert USB after that reinstalling but being not recognized help pleae

  I have a new computer, webcam stopped working, I reinstalled the software screen indicates it has been reinstalled ok but when I try to use the camera it says on screen no device connected to the usb. help please.

  Hello

  1. what operating system is installed on your new computer"? XP, Vista or Windows 7?
  2 do you see anything unusual (yellow bang) in Device Manager?

  Assuming you are using XP (because the thread is in the XP category), I suggest you follow the steps below.

  Step 1: Use Device Manager to find the hardware changes
  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start and then click Run.
  Note If you are running Windows Vista, click Start and then use the search box.
  b. type devmgmt.msc, and then click OK. Device Manager opens.
  (c) in Device Manager, click on your computer so that it appears highlighted.
  d. click Action and then click Scan for hardware changes.
  e. check the USB device to see if it works.

  Step 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Try to install the printer HP laserjet 1012

  I just got a new computer with windows 7.  I tried to install my printer HP laserjet printer HP laserjet 1012.  I have the installation disc, but it does not work and the HP site does not list the drivers for this printer.  I'm out of luck, or there at - it a way to install this printer.  t works fine on windows XP

  Users have reported that the Laserjet 1015 driver will work for 32-bit systems with the LJ 1012.  In another forum users reported using the Laserjet 3055 PCL5 the 1012 Laserjet driver in x 64 systems.

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• How can I get assistance when my serial number is not recognized? Please

  How can I get assistance with my serial number is not recognized? Please

  you have called apple and they do not have a record of the serial number of your Mac?

  Reach

   > about this Mac

  

  your serial number (themine is deliberately obscured in the screenshot) should appear here.

  Do not you post, but it should be 11 characters

  BTW, a MacBook Pro does not iOS 9.2.1 is for phones and stamps. you want OS X.

• my product key is not recognized. Please notify.

  my product key is not recognized. Please notify.

  Please tell us which product is the key.

  see this:
  http://support.Microsoft.com/kb/555375

• Attempt to download first CC on a second computer for my only primary repair. Computer a CS6, I removed it. Now Creative Cloud thinks he is already downloaded and it is not. Help, please.

  Attempt to download first CC on a second computer for my only primary repair. Computer a CS6, I removed it. Now Creative Cloud thinks he is already downloaded and it is not. Help, please. < deleted by the moderator >

  You will need to provide more information, if it does not fit your situation.

  CC desktop applications 'updated' lists when it is not installed
  ----------------------------------------------------------------

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

• LASERJET 1022 device not recognized USB

  When I connect my laserjet 1022 printer on my computer, I get the message "USB device not recognized". normally, I use Windows 7 64 bit, but I try to connect another computer that has Windows XP OS. Win7 or Win XP allows to print anything with appropriate drivers. I think that this is not a driver problem, it seems to be a hardware problem. Everybody respected this problem before, I can't use this printer.

  also we have an another 1022 that works, I replace my printer to it and my printer is not yet printed.

  If I have a hardware problem somebody advice me anything.

  Thanks for your help,

  The printer will print a test if not connected to the computer page? If this isn't the case, then the hardware problem is the printer that is connected.

  If you print a page of test if not connected to the computer, then the problem is on the side of the computer. Try another cable USB or port. Some computers, especially laptops, can have very delicate USB ports (my laptop Lenovo's ) and USB cables can go wrong.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet 1012: laserjet 1012 does not not on windows 7 or Windows 10

  Hello, I had a problem when I updated my windows 7 to 10.

  I found a solution for people like me using a laserjet 1012 on win 7:

  -come on in: manually install a printer. (because yours in not in the list...)

  -Choose the port: port 4DOT

  -Select driver laserjet 3350

  -give a name to this printer, mine was 'laserjet ghost' but you can call it as you want

  -then plug your printer with USB cable and click on 'print a test page', it will works.

  Sometimes you can have a "unsupported device" problem, just turn off the printer and turn it back on.

  Hope this will help other usuers with laserjet 1012 that works very well

  BUT IT S NOT WORKING NOT NOT ON WINDOWS 10

  I FOUND THE SOLUTION FOR WINDOWS 10:

  -first to download the driver for windows vista (I m using 64-bit for my computer):

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=306510&swLangOid=17&swEnvOid=2100

  -J' uses the same procedure as for windows 7, but I chose to drive rather than in the list of printer driver. So I choose the driver that I just downloaded earlier: hpc1015w.inf, then open and select the HB 1012 printer

  -J' I'm able to print from microsoft office word, and other software, but I'm still working for my pdf Acrobat printing.

  Hope it helps.

• Printer Laser Dell 2130cn color not recognized on Windows 7 x 64

  Hi, have a Dell 2130cn duplex printer which worked fine on my old computer Dell 4550 (Win XP).  I just purchaded (2) Dell XPS 8300 (Win 7 64 bit) and when I plug the 2130cn via USB, it is not recognized.  The USB ports work fine with everything.  I spent hours with Dell support, as they just sent a service technician to replace the motherboard.  Still the same problem.  I seem to think the good driver for Win 7 64 bit is not available.  Someone at - it a thought on this?

  Hello
  The printer is compatible with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Dell%202130cn%20Color%20Laser%20Printer%20&OS=64-bit
  Note: according to the news of the compatibility of the device has not all the drivers to install when it is connected through USB.port.

  Follow the suggestions and see if it helps.
  Method 1
  You can run the printer troubleshooter.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  You can read the article.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3
  You can uninstall and reinstall the printer and then check.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 4

  You can also contact the manufacturer of the printer for assistance on this issue.

  http://support.Dell.com/

  See also:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• How can I make my printer (HP LaserJet 1012 Laser Printer) compatible to Windows 7

  I want to use a (HPLaserJet 1012) printer with Windows 7.  How can I do this?

  Impossible to make compatible hardware, see the HP forums

  http://h30434.www3.HP.com/T5/printer-all-in-one-software/Windows-7-printer-driver-for-HP-LaserJet-1012/m-p/1529547#M33718

• USB ports power your equipment, but not recognizing devices

  I started my pc yesterday (21/02/10) - for the first time since the incident of the blue death screen has resolved on 10/02/10 (see 'recent history of the problem' below). I got a screen that says "volume dirty cleaning in 3 steps" or something like that. Subsequently, the windows starts fine but the USB ports stopped working.
  

  All 3 USB ports are now fueling your equipment (confirmed by my laptop fan) , but none of them give me access to any external devices as my flash drives.

  Note: I didn't say "" do not recognize devices "and instead said"give me no access to devices "because when I plug in my flash drive, it is profiled as a material published by ususal Display icon at the bottom right of the taskbar." Of more when I try to eject the material, the flash drive appears as "Kingston Data Traveller". It's simply not let me access the flash player - instead when I click on the flash player icon (drive F :) it asks me to format the drive before using.) But then when I am trying to format it says that "windows cannot format the device."

  [Please note that the USB ports are all works perfectly between these two dates.] In addition, I did not any changes, hardware or software, recently. ]

  Recent history of problems (might be useful):

  I got a blue screen of death problem 2 weeks after I had installed Windows XP updated 09/02/10. I could solve this problem by uninstalling all the following patches: KB978262, KB971468, KB978037, KB975713, KB978251, KB978706, KB977165, KB975560 KB977914. (as suggested in the forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1)

  After that I do not start my PC, until yesterday. It is the problem of the USB to start.

  Hello
  ) not a bad answer, but a lot of work and you can make mistakes
  make a sfc/scannow, as indicated here that it will reinstall missing and corruption of files http://www.updatexp.com/scannow-sfc.html I also noticed in your answer "dirty volume in 3 steps of cleaning" is you have using a kind of cleansing software registry cleaner etc. Registry cleaners that aren't much good for the most part and they will mess up your computer...
  If you do not use a cleaner that get some anti malware software download and run
  I left and use http://www.malwarebytes.org/ please click the checkbox as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• HP laserJet MFP Pro M225DW printer: printer HP laserjet MFP M225DW not install on windows Xp sp2

  During the installation phase, I get a fatal error:

  A fatal error occurred prevents use of the product.

  Click 'Cancel' to cancel the installation.

  No reason. No work around. Reset did not work. Download the basic driver came with the same error.

  But installed on Win 7, 8 succeed.

  Help, please.

  

  Hello

  Printing software requires Service Pack 3, you can find system requirements below:

  System requirements: Windows XP (32-bit) Service Pack 3http://support.hp.com/us-en/document/c04328137
  

  You can follow these steps to upgrade your operating system, it is necessary to install the HP software for your printer:

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Kind regards

  Shlomi