USB recovery is not partition properly and will not plant recover.

Similar Questions

• Creative and Manager application cloud doesn't load properly and will not uninstall.  How can I get rid of them?

  Creative cloud and Application Manager did not install correctly.  Having the two icons on the screen.  Tried to uninstall it but nothing happens.  How to solve this?

  It was too complicated for an old man.  Someone suggested I try the restore function and who took care of her.  I'm not planning on anything whatsoever to another download from Adobe.  The Adobe programs I do not work in all cases.  Thanks for trying to help.

• Acer USB recovery does not

  Acer-M5-582PT
  Hard drive has crashed, bought Acer recovery flash drive.
  Flash drive boots into thin Acer stuff.
  After I tell him how to partition my drive (% System, the power recovery partition), it partitions the disk, and then run quick commands.
  About 5 seconds after partitioning has completed a command generates an error: "M:\NAPP.dat is miss."
  Only a box OK which brings back me to partitioning options.

  What gives? It's official media purchased from Acer and I'm able to install Win7 very well for the reader and the comp are fine.
  Any suggestion would be appreciated.

  I found this online: http://ubuntuforums.org/showthread.php?t=1619381 (post 9 specifically)

  I used PartedMagic live USB to remove GPT and MBR records.
  The Acer Recovery USB should then be used with the default options (creating the recovery partition, divide the hard drive in system & data partitions).
  It seems that the Acer recovery software has been hardcoded to mount some drive letter perhaps?

• Pavilion 15-b129wm: USB recovery does not

  I followed the instructions that came with the recovery media, he asked for a few minutes, then the screen went black for several hours. The support hotline kept breaking and I can't find a solution.

  Thank you for this!

  If you get hard disk short DST a fails, which indicates the drive is defective and you probably need to look at the possible replacement options. I suggest you contact our telephone support about this information. Please follow this link http://support.hp.com/us-en/contact-hp enter your product number, select your product, scroll down and fill out the form. Will then give you a case number and a phone number / reference to give the agent who answers your phone call.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
  Have a nice day

• File recovery does not file recovered from the original folder

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

  I think you'll be lucky to get anything.  Where a file is no not part of the file - it's the metadata stored elsewhere, so it is not possible to recover the files to their previous location.  In the future, it would be much easier to restore files if you have a backup.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I tried two programs of file recovery: Recuva and Pandora Recovery

  Two programs from many files deleted my involuntary removal of the My Documents folder.  However, I expect that the recovered files will be recovered in their original folders that were in My Documents folder deleted.  Instead, the files have been recovered as separate and unrecovered files in their original folders. Is there a recovery program that would recover the files into their original folders that were in the deleted Documents folder?  Otherwise, it seems I have to open about 7000 files and sort them in their folders respective orginal. This seems to be an extremely time consuming and difficult task. Can someone help me? Thank you.  John G.

• Internet Explore does not work and will be shut down despite the fact that he is on the screen and I use it. I have windows Vista

  Although Internet Explorer seems to work and is usable, I get an error that says Internet Explorer is not working properly and will be closed.  .  Is not always close because it threatens too but sometimes it is.  Any solution please?  I have Windows Vista.

  Hello
  1 did you change on your computer before this problem?
  2. What is the exact error message?

  Follow the suggestions and then check out.

  Method 1

  You can optimize the settings of Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Method 2

  You can reset Internet Explorer settings.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will delete browsing history, delete all temporary Internet files, cookies, form data and password especially all stored

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• partitioned and converted to dynamic, recovery does not load

  HY!

  I wanted to create a new partition on my laptop (g62-a20eh xc211ea), but for this I had to convert my hard drive in Dynamics. And now the recovery does not work, it is not booting and cannot run it even of the operating system. Is it possible to convert it back to basic? If so, then it will work recovery? If not, where can I order the recovery DVDs? Or is there another solution? (I'm from Hungary and I'm sorry about my English skills )

  Thank you

  You can try EASEUS partition master home edition... It's free and

  its work for me!

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

  The solution: uninstall ZoneAlarm!

  I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

  NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

  So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

  I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

  Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

  Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

  If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

  I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

  On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

  Hope this information helps others finally solve this problem.

  See you soon,.

  Matt

  64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

  Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

  If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

  I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

  If anyone needs any help other than that, feel free to ask.

• my computer turns off during a recovery program, I have selected and not will not restart and I can't reinstall windows because it says there is error of san

  I tried to use a recovery program, I selected after turning on the computer and pressing f8 I selected recovery option, and my peower turns off in the middle of the process, now, the system does not start and the computer wen I try to load windows says a problem has been detected
  technical information
  0x00000007B (0xF78D663C 0xC0000034 0x00000000 0 x 000000000)
  My computer is a sony vaio

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://eSupport.Sony.com/

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.