USB Redirection problem

Similar Questions

• Problem with USB Redirection on Horizon View Client v2.3.0 for Linux

  I had a problem on the USB Redirection when connecting to the Server of VMware View by Horizon View Client v2.3.0.

  1. Here is our configuration:
     1. Server:
        1. Horizon View Server 5.5 + Windows 7 Enterprise VDI
     2. Client:
        1. Thin client (TI ARM platform - 8148)
        2. Horizon View Client v2. 3 for Linux
        3. USB Flash: Kingston 8 GB USB 2.0, FAT32
  2. The issue: USB flash can not redirect to VDI successfully.
  3. Some status on our test:
  • The USB is plugged USB port on workstation before connecting to Horizon view Server 5.5
  • Light client can recognize and use USB flash to the local site.
  • When we connect to VDI, we can see the USB driver is responsible for research and installation, but windows VDI() reports fail to install the USB driver finally. It seems that VDI trying to acknowledge the failure of USB flash but finally.
  • It is held even Let's restart the workstation and VDI.
  • Attached file is the log of the Horizon of the VMware View Client.

  
  All welcomed to this topic?

  Unfortunately the newspapers show much... (note: they do not contain client-side logs)

  one thing I thought well... since he is a computer thinClient - we have seen the questions that manufacturers computer thinClient some of their own 'management' software install on the client. He often tries to do things with usb devices (maybe try to share them between a receiver client citrix application and view client app or maybe just there is a citrix receiver application installed too). In our experience, we've seen these apps interfere between them as they try to hang the bottom of usb devices down into the kernel.

  as such, could you try stop any 3rd party services - either citrix or your provider of thin client and then try again.

  If the problem persists, can you be sure to also collect these log files from the computer thinclient:

  Windows client

  • %ProgramData%\VMware\VDM\logs\debug-*.txt
    AND
  • C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-*.log

  Linux client

  • default /tmp/vmware-root/VMware-view-Usbd-*.log
    AND
  • / Library/Logs/VMware/vmware-usbarbitrator -.log

  for reference, the Agent-side usb connects:

  • %ProgramData%\VMware\VDM\logs\debug-*.txt

  see you soon

  peterB

• ThinPro with VMware View USB Redirection

  Hi all:

  I'm trying to configure my workstation (t620 ThinPro 5.1 running) to start required services necessary for USB with VMware View forwarding at startup.  I tried to add the command to /etc/rc.local and created my own init.d script, but none of these options automatically launch services.  Run manually /etc/rc.local and the custom init.d script launches the services successfully.

  Has someone managed to get the necessary USB redirection services running at the start?  Any guidance is appreciated.

  Thank you.

  Solved my problem... changed under USB Manager Remote Protocol of VMware View.  Updated this setting caused VMware services to run at startup.

• Usb connection problem scanner Fujitsu fi-6230

  Hi, im trying to connect a scanner usb (Fujitsu fi-6230). I installed ISIS and Twain driver (HP Compaq 8300 - Windows 7 x 86) host and the vdi (Windows7 x 86). The client is version 5.1 and I tried with PCoIP either with RDP (as far as I know do not support scan usb). The scanner is recognized by the host, but in the virtual is unrecognizable device not even as being unknown. There is no restriction for usb redirection in the display manager. I have uninstalled/installed Vmware USB Host controller, but did not work. Do I have to activate the GPO by default DC on RDP redirection? Can you please help, I don't know what is happening.

  Thanks in advance

  Well thank you for the help. No upgrades have been made. It was a new image. A windows 7 OS has been installed and has been optimized according to best practices of vmware. After that, the appropriate vmware view agent has been installed. The same agent was installed in another image whose behaviour is normal.

  I found this: https://communities.vmware.com/thread/440975 I did the quickprep instead of sysprep operation. I'll try the 2nd recommended method and I'll let you know the Message was edited by: alipkok

  After the 2nd solution, the problem seems to be resolved. I reinstalled agent version 5.0.1 - 640055. Thank you message was edited by: alipkok

• View of 4.5 + Wyse TCX USB Redirection + V10LE

  Hello, I am new to these forums; I turned on these forums for advice/help with the current implementation, I'm working on that.

  Some basic information:

  We bought 250 Wyse clients V10LE light, two servers Dell Poweredge R900, VMware VSphere Standard (8 CPU) and 2 x Windows Server 2008 R2 Datacenter Edition.  Our original deployment was a set to serve as a virtual server 08 VM servers terminal Server, the V10LE attached to these Terminal Services virtual and received the server-based desktop computers.  This has proved to be a major disaster, and now the 30 users on these clients we have deployed suffer daily with constant crashing and inability to do their job.

  Current situation: we changed our game plan to integrate VMware View.

  In the tests, I first tried the view Management Server 4.0 (older Version) after some violins, we were able to get workstation to work perfectly in the environment of the view, keep in mind, this environment did not use VMware view composer that I was unaware of his abilities and just had to test.  I was able to get the redirect TCX USB to work perfectly by installing more server on windows XP VM workstation connected in.  We were able to redirect brother multifunction printers and use all the features of the printer as if it were installed on the local PC.

  Having discovered how perfectly it would solve our problem, I decided to try the 4.5 administration package view.  This is where I ran into problems.  TCX USB virtualization does not AT ALL.  The client detects the device USB, TCX client-side working properly, the server suite is installed on the Backend (XP Win VM persistent no).  I have now installed and use the portion of the administration of the view composer, composer use capabilities are incredibly beneficial to our environment.

  I tried to install the Agent from the view on the XP desktop with all the modules, including the USB virtualization, the transfer did not work at all.  After the suggestion of installing the agent without USB redirection with a Wyse tech support person, I tried, same results.  I don't know what the differences are there between 4.0 and 4.5 view server, but all that has changed is not to allow this to work.

  Any help/suggestions would be greatly appreciated.

  Thank you very much.

  In 4.0, there's an option under view connection server settings so that the login server to "Direct connections" on the desktop. This basically ignore the login server and your client to connect directly to the virtual machine. This was necessary for a lot of TCX to work in 4.0. I don't see even this option in 4.5, then perhaps the problem, you see?

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• USB redirection in farm RDSH vWorkspace 8

  It seems that for new trendy USB drives USB redirection does not work.

  If I configure the drive letter that is known to the system before initiating a connection, redirect is OK, but I can't redirect USB drives are connected while the session is active.

  Any recommendations? Thank you to

  Best, Robert

  Hi Robert, what version of vWorkspace connector are you using? In the most recent versions, we have included an option to fix precisely the discs which are connected after the connection is established. The option is in the local resources | Another support plug n play devices | The devices that I plug in later. If you do not have this option and then move your connector vWorkspace to v8.0 or 8.0.1 consider David

• Possible redirection problem - Google redirect spy

  My Hotmail emails are no longer visible.  My research is rediredted to an offer to sign up for Hotmail sweeping. I beleve I have the Google redirect spy but I donlt know how get rid of it. I use Windows 7

  Hello

  You don't specify your Windows version, so the underside is mainly for Windows 7 - Vista is very similar.
  Use EXECUTE instead of start - search for XP.

  -----------------

  Check these:

  IE8 redirect problems - possible Causes and fix the redirect problem
  http://www.brighthub.com/computing/Windows-platform/articles/60039.aspx

  http://EzineArticles.com/?Google-redirect-virus-fix---how-to-get-rid-of-Google-virus&ID=2450094

  http://ask.MetaFilter.com/100853/Oh-that-nasty-Google-redirecting-virus

  http://www.GeeksToGo.com/forum/how-to-fix-Google-redirects-t267407.html

  ------------------------------------------------

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
  installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
  possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask to
  It's here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
  not all are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  =========================================
  =========================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
  See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
  see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Overview of VMware View Client shows "USB redirection is not available on this desktop computer.

  Hi all

  We try to connect to an RDS Server with std R2 2012 Windows via the PCOIP Protocol, but we get the above error. Does anyone know why this might be?

  Thank you

  James.

  When you installed the agent view you choose the song "USB redirection '? In my view, it is not selected by default in the standard installation and when you activate this feature, he throws a warning that you must accept too much security.

• USB redirection works with a view Windows Client that connects to a Pool of RDS running Server R2 2012

  I installed the Agent view Horizon (6.0.0) and direct view connection Plugin (6.0.0) on a physical server running Windows Server R2 2012 with desktop Services remotely active.  I would use the USB redirection from the client to the server.   When I connect to the remote desktop session by using the Windows Vista client, he tells me that the USB redirection is disabled.   I tried connecting the View Client to the server view connection and directly to the RDS Server with the same result.  I need to activate RemoteFX on the Windows Server running RDS for USB redirection to work?  I don't have any hardware remotefx, that's why I have not yet tried.

  USB redirection is not supported on the RDS (2008 or 2012) guests in Horizon 6.0.

  see you soon

  peterB

• USB redirection for users on site / off site

  I would like to set up 2 different strategies based on users off-site or on-site (zero client). One of those who are the USB redirection.  I would like to disable the USB redirection for my users off-site and enable it for my users on-site.  My question is... during testing, I disabled USB redirection and my mouse and keyboard continue to work.  I was expecting this does not work.  Can someone please explain this?  In addition, no matter what recommended for zero client devices?  Thank you!

  unless you change the 'default' settings, keyboards and mouse (even if they are plugged into the usb ports) are not treated as usb devices. Keyboards/mouse are considered essential and redirected via another "channel". This means that you don't need redirect USB to work for keyboards and mice to exploit.

  If you really want, you can change this (IE so that they are treated as usb devices), but you get better performance if the default mode of treatment for these devices is left in place.

  This applies to zero and soft clients.

  disable access usb for off-site users (assuming they don't use zero clients), the easiest way is to block port 32111 on doors. This will prevent the usb traffic is routed to the guests. Internally, anyone using a soft client can always use port 32111, or if they use zero customers then use the usb port that is built into the payload pcoip.

  If you have some users outside using zero clients, how you can block these use usb will then be discussed with Teradici.

  hope this helps at all,

  see you soon

  peterB

• View the 5.1 USB redirection on the internet?

  Hi people,

  I use view (preinstalled) 5.0 client on a workstation to WES7 for connections to a server to view security 5.1 and Win7 VM PCoIP.

  If I connect to my USB LAN of my work of Flash drives very well redirect.

  If I log on the internet they do not.  No detection equipment, does not appear in my computer at all.

  One of them blinks as it wants to connect but does not work.

  Should I wait for USB redirection to work well on the internet like this?

  Any suggestions?

  Thank you

  romatlo

  Hi Romatlo

  USB is synchronous and very 'chatty '. For a peripheral storage appear in windows (so FAT format) then the entire FAT table must be read. This can be very large, depending on the size of the storage unit. Often, nature chat transfer and latency for each round trip of a message can mean that the device takes several minutes to appear in your guest virtual machine. If the lights flash as you describe, so I would hazard a guess that it actually works, and if left long enough then the device appear...

  There is more information in my blog here: Redirection of USB devices in the Horizon of VMware View 5.1 and 5.2. Blog from VMware Computing end-user - Articles VMware

  In addition, in my KB here - which offers some suggestions to improve performance (a link to this blog): http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&externalId=1022836

  In short - for better performance, try to reformat the device using NTFS rather than FAT. Lower latency of the network will help - but - is probably not in your control!

  hope this helps,

  peterB

• Office Intitializing for USB redirection

  Hi all

  My view 4.6 environment runs just find unstil the upgrade to 5.  Jeutiliser then another connection broker for external users, and since the upgrade my users have no USB redirection.  When you pull down the menu, it shows initialization of office.  IS this a new port that must be open on the firewall?  All internal users is not the issue.  Any help is appreciated.

  You are right, USB redirection uses 32111 and there is never an annoyance.  I hope you get it worked.

• Can't get USB redirection to work

  Hello.

  I have VMWare View 4.6 assessment and have register and downloaded the binarys. But I missed something pretty basic.

  I installed a connection to the server running on a virtual server Windows Server 2008 R2 Standard and it seems fine since I can connect to a virtual machine in Windows 7 x 64 with an HP t5740e view Client 4.6 running on PCoIP. I'm not under VC, and all machines are running on a host ESXi 4.1 on a Cisco UCS C200 which makes all the difference.

  I chose the option "Auto-connect USB devices" on the connection bar, but if I connect a standard USB key in the client, it does not apper in the remote session. I checked that USB redirection is enabled in the server connection policy, and that the driver of USB device on the client and the remote computer is turned on and seems to work as expected.

  What to do to make this work? I've linked also to examine the log files that is produced on the client, but I see no error or so, but I really didn't know what I should look for. There is no firewall does not block traffic. The Windows Firewall is enabled for both the client and the remote session.

  Best regards

  Johan Christensson

  I would certainly get network checked once more. Not put the safe harbor 4172 TCP and UDP is open in both directions.

  Except that I have no more ideas

• SD5010 DVD Player USB Toshiba problem

  Hello

  I recently bought this DVD player, when I play a movie through my USB always, it stops before the end of the film and cuts back to the main menu. Does anyone know why this might be happening? I tried resetting the DVD player and that didn't work. I deleted a few movies on the stick, and that did not work.

  What is the USB itself? It's a 16 GB.
  Thank you

  Theoretically, it could be a problem of USB if strongly recommend to test this using an another sticks too.