SD5010 DVD Player USB Toshiba problem

Similar Questions

• Satellite P200-1EE: DVD player HD Toshiba "video output for external device cannot".

  Need help!

  My P200-1EE won't play HD DVDs. At startup the HD DVD software with an HD DVD in the drive, the drive displays on the screen, and after a short time returns an error. The message is ' + Toshiba HD DVD Player - impossible to output the video to an external device. Please change your display device by pressing the FN + F5 keys after the end of the application ' +.

  Problem is that I do not use any display on the screen of the laptop. Only the screen of the laptop is available when I use FN + F5 suggestion. It does not cure the problem.

  Drivers are up to date as far as I can tell.

  Any help is greatly appreciated.
  Gandalf

  Hello

  I searched this forum for similar issues and I think I have a solution.
  It seems that the Realtek audio driver causes this problem.

  According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.

  Check it;
  HD DVD title does not play ("unable to output the video to an external device")
  http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20

  Good bye

• Inoperative Matshita uj 820 s DVD player portable Toshiba P25 - 5262 (XP).

  Player turns weakly when disc is inserted and no icon present on the page 'my computer '.

  Downloaded driver does not install and says "driver corruption."

  Poster yellow caution icon Manager.

  Yes its oem.

• DVD Player Toshiba laptop not recognizing discs

  My DVD player portable Toshiba Satellite M300 no longer recognizes discs.  When a disc is inserted, the player turns on but does not recognize that a disk has been inserted.  I have read that it is a problem with the installation of the Vista SP2 but unable to find a solution.  Can anyone help?

  It is unlikely to be caused by the software (Windows), but is much more likely to be an optical drive down (hardware). Try to start with a bootable CD/DVD, your installation of Vista/recovery DVD for example (do not run recovery!) or a Linux Live CD. If the reader does not recognize the drive outside of Windows you will know for sure that the material is bad. Contact Toshiba technical support for replacement in this case. MS - MVP - Elephant Boy computers - don't panic!

• Satellite Pro U300 - DVD Player error

  Hello
  I had not used my DVD player for a long time, and when I tried to use it again the other day that he has stopped working. Where to insert the DVD and the DVD player provided Toshiba starts a message pops up saying
  "Impossible for the release of the video on an external device. "Please change your display keys of the device by pressing the Fn + F5 after the end of the application.

  I did what he said and further and have made sure the computer does not recognize somehow, another device connected to my laptop. All that shows is the LCD screen of the laptop and nothing more. No clue as to how can I fix? I don't have an external display at the moment as im at Uni. so I can't plug a hook to the top and see if it works like that and then properly close. Any other suggestions? Would be great,

  Thank you

  George J.

  Hello

  This problem is known to me. I got it with my Satellite P200. I was not able to solve this problem.

  I just deleted a Toshiba DVD drive and now I use VLC media player. Download the latest version. The player is just great.

• DVD PLAYER CAN'T READ DVD MEDIA IN THE STUDIO HYBRID DESKTOP

  You will appreciate the help a lot about this question. I have the desktop studio hybrid 140G. For the past few weeks the cd/dvd drive rom played inconsistent dvd media files. But since last week it has completely stopped playing DVD media. Although it opens the audio cd and dvd software installation files. I updated the dvd player but the problem persists. On the control panel if I check the current status of the dvd player, it shows - works correctly. I am running windows vista and the cd/dvd rom drive is TSSTcorp DVD +-RW TS - T633A ATA Device. Hopefully, there is a solution for this that I am running out of ideas. I run Dell diagnostics. in the end, it's show "a few problems identified but diagnosis impossible to find a solution; No DVD disc not recognized. "

  Hello

  You can run the tool the following data section and check if this is useful.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• His grave suddenly on a DVD player, but in the first, still and WM Player

  Hello

  The sound on the DVD I burned in still suddenly falls to almost inaudible--but only when played on a DVD player! The problem does not occur on a computer (well in the first, still and DVD sounds good on all players like windows media, real player, etc.).

  Drop noise happens in the same place, about 40 seconds in the 1/2 hour video. Then, the sound blasts at full volume for the end credits I inspected the 2 audio tracks in the first and track volumes do not change, nor my knots of volume control in the securities themselves explain the problem.

  Why it would sound good in all applications on a computer, but not on a DVD player... and why the first 40 seconds would sound good on the DVD player?

  I could hear volume of 'regular' dialogue in the left and much softer, but not absent, in the right. I can't guarantee this isn't an artifact on this end.

  I think you have solved the audio problem at first. Looks like you have a stereo audio track from a source who had a microphone in a single channel. Instead of panning, "fill right" (or left, I always have to check myself on this) so that you get the dialogue on both sides.

  I don't think that you dismissed a phase problem. But I suspect that when solve you the problem of the track, your audio will be correct.

• If I get the dvd of recovery to win s 7 of the manufacturer, what problems is I meet when I try to boot from a usb dvd player

  Separated from this thread.

  OK here is what I was asking.  If I get the dvd of recovery to win s 7 of the manufacturer, what problems I will get when I try to boot from a usb dvd player.  I worry because my computer is uefi firmware. should I disable secure boot, make sure the dvd usb drive first in the boot order.  What other bios setting I would be worried.

  You will get a facility better if you find the ISO to create such media as discussed in step 1 of the clean reinstall Windows 7 follow these steps to get the best possible installation.  You can even create flash media if that's easier for you.

  Regard to Recov disks that reinstall all the bloatware factory, Yes, you must disable Secure Boot in firmware that doesn't support UEFI to install Windows 7, and then start the media as a UEFI device.

  After installation, you can pick up some performance and optimize the installation by following Clean Up Factory Bloatware .

  You can also do a Clean install Windows 10 improvement using the Windows 7 product key, as this is explained in this link.   You can at any time change to Windows 7, even move back and forth until only is installed at the same time.

  Let us know if there are any questions and how it goes.

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• Connect USB hard drive to the SD2010KY DVD player

  Hi there Aussieland...

  * More about SD2010KY DVD player + * bought on a month back...

  Any kind dbo know the answer to:

  Could it be caused damage to run a USB connection external 3 1/2 "HD (160 g) - say a .avi movie - into the USB port on the front of the unit?

  That is to say, power supply of the unit will be responsible for the extra bit Ok?

  Or is this the wrong forum to ask this detail? :)

  Thank you - everything you need to know about would of course be appreciated...

  See you soon

  To be honest, it is Toshiba forum created for calculation problems.
  In any case, check the drive specification to see if the USB port has enough power for external HARD disk. I had old DVD player and I could only use USB keys.

  You can try to connect USB HDD to see if the drive will be recognized correctly. You won't damage anything.

• Satellite L500 1QK - output HDMI does not work with a Toshiba DVD player?

  Hello

  Why Toshiba DVD player does not work when I plug the HDMI out on my other bigger screen...

  While he plays well the DVD on the computer and, if I can get the signal HDMI OUT with VLC playing other video formats...

  I hope there is a way to unlock this, because I prefer to play DVDs on my computer (for his problem because I have the ear is not good)

  Thank you in advance for your help, if you can.

  Kind regards.
  Mylène
  (Satellite L5001QK France)

  Hello

  To be honest I n don't know 100% what your problem is.
  If you want to watch DVD movies on your computer with the help of a reader DVD Toshiba but the captain must be indicated on the external screen follow these steps:

  When you have connected the HDMI cable (other) outside on the screen, use FN + F5 and switch to the external display only. When you see the desktop on the beginning of the display external Toshiba DVD player and I think that everything should be OK.

• Re: TV Toshiba 46WH08G - no image using a DVD player through receiver

  I have a pioneer DVD PLAYER connected to my Yamaha reeceiver via video cables component and output digital optics.

  Image and sound via 46WH08G TV is very good - no problems.

  I recently bought a new AKAI DVD player to player USD movies.
  I connected the component video output cables and digital optical from the Pioneer to the Akai.
  The sound is perfect, but no image.

  Can someone explain why - it has to do with the scan type.
  Any help would be appreciated.

  Best regards

  Carl

  Hello

  It's a Toshiba laptop computer and accessories for laptop forum and I doubt that anyone would be able to provide some ideas on this theme.
  Ask you for help on some special HiFi forums recommend

• Satellite Pro A300D - cannot play movies on a Toshiba DVD player

  Hi guys,.

  When I play movies in Toshiba DVD player I get the following error message: "unable to output the video to an external device. Please check the external output setting after the end of the application. TEMPRO, I installed and tried to install all updates - some of them were for different hardware so wouldn't install.

  I get a similar problem in Windows Media Player "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card. VLC player works fine. The drive otherwise normally functioning.

  It's the same problem, as described in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=201029&tstart=0, but all the answers are a similar problem with HD DVD on a different model (P200).

  Anyone know how I can fix this problem? I'm not sure I can be bothered to go back and reinstall Vista etc...

  Thank you
  Alex

  Hey Buddy,

  According to the Toshiba DVD Player error message: are you trying to watch DVDs on an external monitor or TV?
  In your case, I will try to reinstall the DVD playback software. This means delete the current version and then restart your computer. Then download and install the latest software from Toshiba DVD player.

  But to be honest: it's that everything works with VLC media player as it s very big and small media player that can play all audio and video files. Isn t it? ;)

• Screen keeps flashing using a Toshiba DVD player

  My DVD player plays DVD video but the screen still flashes, can anyone help please?

  You have an Intel graphics card?

  Well, if yes then I know what could be the problem.

  Primarily this question didn t appear initially. Am I wrong?

  The problem is that the automatic update of Vista installed has installed a new version of the graphics driver on your laptop. To my knowledge, this could affect the Toshiba DVD player.

  You must remove the installed graphics driver and should install one on the page of the Toshiba driver that is compatible with your laptop series.

  Check it out

• Re: Toshiba DVD player does not work

  I bought a Satellite L510 and installed upgrading Windows 7, now DVD Toshiba program does not... It is said that missing modules... ideas?

  I don't know what the problem is here. I installed Vista on Win7 version and it works on my new Satellite A500.
  Visit the download page to Toshiba for your country and check if the DVD player is available for Win7.