Similar Questions

• communication serial port works to the max, but not in labview

  Hello

  I am trying to connect a regulator to oxygen flow (flow Bronkhorst EL) to a laptop through a USB using MAX and Labview series port adapter. After the MAX aperture, I see my instrument on port COM5 and need to change the baud rate to 9600 to 38400. After this I querry the command: 06030101217D00\r\n, I can turn the mass flow at maximum power regulator (looks a little weird order because of the syntax of the instrument, but it works very well). If I write a vi to do the same and send the same string through visa series, I get no results, it seems that the command is not send to the device. I tried to change all settings for the serial port, nothing seems to work.

  I've attached an example vi here, any suggestions?

  Hello

  just a simple misunderstanding, happy that you added the code.

  In MAX \r\n will be always interpreted as send a cr and line break.

  In LabVIEW only when you select \codes view by right-clicking on the channel.

  In your situation, it now sends a-a r another- and a n

• Camera works to the MAX, but not in LabVIEW

  I struggled a lot with getting a camera DCC3240M of Thorlabs working in LabVIEW. The software supplied (Thorcam) works as it should. However, the LabVIEW SDK does not work as it should, it gives an error 155 "the operation is not supported.

  Instead of the SDK software, I tried the drivers for DirectShow and now the camera arrives in MAX and works as it should. He also appears with IMAQdx list Cameras.vi and in Vision Acquisition Express vi. BUT when I try to run IMAQdx open Camera.vi or the Express vi it does not work. Open device gives a DirectShow error code 0 x 80040275 "no capture hardware is available, or the hardware is not responding." And when I try to select the camera in the express vi, a red icon is displayed and I can only choose "Cancel":

  

  It's really very annoying that the camera obviously work with the drivers provided, but I can't use it in LabVIEW.

  I would be grateful for any ideas what is wrong. I'm running LabVIEW 32 bit on 64 bit Win8.1.

  Problem solved!

  I carefully removed all the drivers that came with the camera and then I installed the drivers from manufacturers (IDS) instead of Thorlabs drivers. And now it works, the camera always appears in MAX and it does not work. But now the supplied screw. I'm so happy. It took me a week to understand.

• FireWire camera works to the MAX, but not in LabView

  Hello

  I use a 1394b (grey Grasshopper Point 14S5M-C) camera connected to a 1394 bus controller. In MAX, the camera works fine, but it will not work with all files of 1394-example LabView. These allways throw the error "NOR-IMAQ IEEE-1394: (Hex 0xBFF6800F) attribute not supported by the camera" even if some of these example like "grab.vi" files no attributes are defined at all. On the same computer, another device (Point Grey Scorpion 20SOM, 1394 (a) works without any problem.

  Can anyone help?

  Hi Christian,

  Thanks for this tip, this is the reason. I was unintentionally using the IMAQ instead of example IMAQdx files. With IMAQdx it works now.

  Best regards

  Karl

• Unit works fine with MAx but not with Labview visa series

  I have a RPM sensor connected to tachometer Monarch monarch, it gives error while coding in labview and works very well in Max if the sensor does not read 0. I wrote RS-232 simple programs never had an error, but this one's errors... not ablt remedy... Help, please

  Hello

  I solved it by using bytes to the port if there is anything in the port, I read it otherwise, he simply says no playback.

• Why did the counter works in MAX, but not of Labview?

  Please help, I've been away from Labview for more than 3 months and I'm pretty rusty...

  Last year, I configured successfully NI9401 to measure the period (in seconds) by counting the rising edges of my sensor signal.  Since then, I bought a new PC and loaded all my software inside, including the Labview VI that has worked successfully on the old computer.

  I can see the digital signal using MAX and test for the NI9401 Panel, then, I know that my son and my TTL signal is OK, but nothing except the below error when I try to run the attached VI, happens...  How can I say this VI to search for the signal on channel 14 and MOD3/CTR0?

  Thank you. I'm sure it's a small adjustment... it worked well a few months ago... do not know what the problem is now.

  Thank you

  Dave

  OK, now.  Solved the problem. The vi is fine, but some fragile son have been identified... worked in MAX but not in vi.  Now that the connections have been tightened, it works for both.  Sorry for the inconvenience.

  Dave

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• I changed my apple ID password. I restarted my computer and my iphone. My new password works with my laptop, but not my iphone.

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  iowaoma wrote:

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  Apps are tied to apple id and password that was used to download/purchase it.

  Try your old password and see if you can update or not.

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Stand By worked in XP Home, but not XP Pro SP3 on the same machine

  Stand By worked in XP Home, but not XP Pro SP3 on the same machine.
  How can I get Stand By under XP Pro SP3?

  * title Moose - see http://stlcc.org/SYS/Standby.bmp for the issue.*

  Hi srfpala,

  I suggest that you manually download and install the latest drivers for the graphics card graphics card or computer manufacturer's website and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr

  I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
  What... do not know any solution.

  Hello

  Please try to post your query in communities:

  General discussion of Photoshop

  Illustrator

  Premiere Pro

  Kind regards

  Sheena

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• USB device recognized on Windows 7, but not Windows XP

  Last week, some of my USB devices need not be recognized on my Windows XP SP3 laptop.

  First of all, it happened with 2 external USB HDD connected via a mini USB hub. Connecting them individually did not solve the problem. The error I got was:

  USB device not recognized. One of the USB devices attached to this computer has worked and Windows does not recognize.

  More importantly, the laptop is no longer recognizing my USB thumb drive, which works perfectly on my Windows 7 machine to work.

  Can I reinstall my USB drivers? Just remove the USB devices, reboot and let Windows reinstall them? They need to be specific to the manufacturers of the drivers?

  I deleted it and reinstalled my hubs USB Device Manager etc, but a device is not installed correctly: mass storage controller. It is of course preventing me from accessing the USB and external hard drives. Where can I get the drivers for this if Windows XP does not have? Sure that the key USB is FAT32 (the default format) I went in the properties of the mass storage controller in the Manager of peripheral and copied the device ID. I did a Google search and was surprised to find that it was a card reader. I downloaded the drivers from my manufacturer Web site, and Windows has detected and installed the drivers for the card reader, as well as the mass storage controller. The USB appears in the Explorer, but shows 0 items. I have After the reboot, the USB is not in Windows Explorer, and when I unplug and reinsert an error comes up saying the USB device is not recognized and malfunctioned.

  The solution was to turn off the laptop, remove the power cable and leave it for a few hours, before feeding it back.

  Windows detected and installed the device very well then.

  I don't think that I understand perfectly why he fixed.

• Why disable Flash Player addon allow videos work on one site but not another?

  I am running Firefox 37.02, Windows 7. I also have flash shockwave V17.0.0.134 & V18.0.0.95 addons. The V18 version is beta and downloaded from Adobe to try to resolve this ongoing problem. He has not solved it. By trial and error, I have established that when I disable the addons above mentioned (notice, disabling seems to disable the other) I am able to get videos from Web site to play (for example: video on golfchannel.com) but not another (example: www.nbcphiladelphia.com). Conversely, if the addons are enabled, the videos on the site www.nbcphiladelphia.com work but those of the golfchannel.com are not. By 'not' I mean that commercial video games earlier but the video of the main object that is to run thereafter is not. I get a black screen and the commercial video recycled again and again. I contacted the golfchannel.com support group who said that they were not aware of all the problems. They suggested that I use the Chrome browser, which is what they use without problem.

  It's weird. You can try using the Firefox Add-on FlashBlock to disable flash on some websites but not others: https://addons.mozilla.org/En-us/firefox/addon/flashblock/