Use an external reference to AOchannel

Similar Questions

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• external reference for USB-5132

  Hello

  I have a few questions (I hope) General on the use of an external reference on our USB-5132 digitizer clock.  We want to block for the other oscillators in our system, which are currently locked to a single reference of 10 MHz.  If I connect our reference of 10 MHz at the entrance of PFI1, my questions are:

  1 is now locked 5132 to our system?  Or, is it necessary to specify in the installation software we want to replace the internal reference of the 5132 and rely entirely our external reference?

  2. in order to have the best possible of locking, do we need to tell the 5132 sample at a frequency which is divisible by 10 MHz (for example 20 MHz, 10 MHz, 5 MHz, 2 MHz, etc.)?  Similarly, we are worse off if you want to try to say, 13 MHz?

  Thanks for any thoughts.

  Best regards

  Penny

  Hi Penny,

  You need all three. The ' sampleScopeSession.Timing.SampleClockTimebaseRate = 1.0e7; "is the Source of SampleClockTimebase rate. The only piece of code that you won't need is the 'sampleScopeSession.Timing.SampleClockTimebaseMultiplier' because your device does not support RIS.

  Kind regards

  Izzy O.

  Technical sales engineer

  National Instruments

  www.NI.com/support

• PLL error-1074118135 could not phase-lock of the external reference clock

  I tried to block the generator of signals Vectoriels PXI-5671 until its source Ref in instead of the clock on board and it is the following error is received:

  Error 1074118135 has occurred to niRFSG wait until what Settled.vi

   

  Possible reasons:

  The converter has reported the following error:

   

  Measurements: PLL could not phase block for external reference clock.

   

  Make sure that your reference clock is connected and that it meets the specifications of the voltage and jitter. Additionally, make sure that the reference clock frequency is correctly specified.

  The clock source I use is the right frequency (10 MHz) and levels (I tried + 6 dBm and + 12 dBm). However, I was never able to get the 5671 to lock to the Ref in the clock source. Any thoughts?

  I haven't dived in the measure of the quality of the 10 MHz clock source that is fed to the VSG but it comes from a device of precision GPS timing, so I'm optimistic that the quality of the clock is within tolerances of the plug VSG.

  Hello tsileo,

  The 5671 requires that you provide it a square of 10 MHz wave which is free race to +/-0.5 ppm precision. I think that the amplitude levels look correct.  I would like to confirm the accuracy of your GPS unit's clock.  I also would ensure that free running clock is scheduled before the NOR-RFSG task.  According to the frame that you use, you might be able to try to connect to the clock of 10 MHz of the chassis with the REF in connector just to make sure that there is not something wrong with the device.

  Kind regards

  Paul C.

• can I use an external hard drive to increase the disk space and memory on xp?

  I am considering an external hard drive of 1 TB to trasmet all files on the computer. There is little hard drive space and memory left. Can I use the external hard drive free space and can it will be installed via USB and use my operating system?

  You can use the external hard drive to transfer your data from your internal hard drive.  Cannot move system files (such as Program Files, Windows and swap files) well.  Looks like your use of the word 'memory' made reference to disk space - it normally refers to which an external drive would not affect RAM.  If you mean disk space, however, you can certainly free SPAC drive this way.

  I hope this helps.  Good luck.

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• Pop/clicks in audio when you use an external DAC of lightning with iPhone 7

  Has anyone tried using an external DAC lightning with the iPhone 7?  I have a TEAC HA - P50 and a Bayerdynamic A200p and both have the sounds by clicking / jumping when the music plays.  Permutation of the cable does not resolve the issue.  These questions were not using a 6 s iPhone or iPad iOS running Pro 10.  Lightning provided the 3.5 mm adapter does not have the same problem that makes me wonder if it's just a problem of compatibility with the new iPhone.  The problem is present on an iPhone 7 runs both iOS 10.0.1 and 10.0.2.  Thanks in advance for any help you can provide.

  I have exactly the same problem running Dragonfly black DAC, random appears, click on the bangs. Audio format makes no difference, nor does the file be listened to downloaded. The CAD even works great with a MacBook Pro running macOS Sierra.

• trackpad is not working I use an external mouse

  trackpad is not working I have to use an external mouse.

  Hey there, here are some tips that might solve your problem.

  1 - Make sure you are on the last update. To see if updates are available for your trackpad, open the App Store and click the updates at the top of the window.

  2-

  Check your settings

  Assuming that there were no updates available (or they do not solve your problem), the first port of call should always be your trackpad settings. Many complaints can be resolved simply tweaking a few options

• Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

  Is it necessary to use separate external hard drive or external hard drive new or freshly formatted for backup time machine.

  Both fresh and freshly, can use as a Time Machine backup HARD drive, although I personally prefer to use newly formatted disk.

• You can use an external hard drive with the Mac Mini?

  I've seen videos that say that we cannot increase the ram on a min of Mac, but I'm curious if this works like an ordinary computer, if we can attach an external hard drive to store some of the memory to free up space. Sorry if this is something stupid just need to know what I can do with it.

  You can use an external hard drive to boot and run with any Mac. Its not going to improve or replace your ram. If you use a mechanical hard drive in any Mac then help and boot from an external drive, especially if it's a SSD will be significantly faster.

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• Use 2 external screens on Satellite L670

  Is it possible to implement a L670 with 3 screens (laptop + 2 external monitors)?
  If so, how this is done?

  I am visually impaired and I currently have 2 monitors connected.
  A 3 ^ rd ^ monitor would be very useful.

  Hello

  As far as I know that the Satellite L670 supports RGB (VGA) and a HDMI PORT.
  But as far as I know, you cannot use these ports at the same time (simultaneously)

  However, I know that some Toshiba laptops support this: like the Qosmio X 500.
  In this case, you need to connect monitors to the VGA and HDMI port and have to press FN + F5 and choose the option: "HDMI + Office extended from a CRT.". But in this case, the internal display will turn off. For example, you can use only 2 screens (external).

  But if you want to use 3 monitors, then I recommend to use an external device/solution as Dynadock.
  Dynadock U3 seems great device that supports the USB 3.0 standard. Google for it.

• How to use the external USB camera on iPhone IOS 6?

  Hello

  I need to use an external USB Endoscope for the inspection of vehicles and etc. using IOS on iPhone 6.  I bought an external USB 2.0 adapter lightning, plugged in the endoscope (comments showed that this endoscope works on IOS devices) and it pops up and says that the device used too much power to be used on the device.  You are not sure if Apple cut the device to use at that time or not? But the device was always powered up as shown on the drive of the USB light on the endoscope.

  I downloaded several types of applications of the observer including I think that the right VLC who apparently used one of the reviewers and I couldn't figure out how to get an any of them to allow the selection of an external camera.

  Does anyone have an idea if it will work or how I can make it work?

  I would be very grateful for any input or assistance with this!

  Here is the link of the product:

  http://AMZN.to/25pJpXY

  Thank you very much

  Dave

  I must also point out that this unit has worked on Android Samsung Galaxy Note 5 with no problem and no warning of power.

• Portege M800-106 - bad quality by using the external monitor

  I use an external monitor LG Flatron L1811S on my Portege M800 and find that the image is not rock solid when I use the display on my desktop or screen of the M800.
  It is particularly visible on the big patches of color block where I can see shimmering light. I noticed that it's especially bad if I recently reconnected the laptop to the network after using on battery power until the battery is fully charged.

  This makes me think that the PSU interferes with the VGA output?
  Any ideas?

  Thank you

  To be honest I m more important lack of information in your ad.
  Are you using the native resolution - 1280 x 1024 / 75 Hz on screen?

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye