use internet from abroad. only use the password or security key
is it possible to leave my house say 45 minutes to a friends house and my internet using a key to security or password and ask them to connect computer with my internet connection
No,
You need a human user (aka meat head ui) interface to accept the offer of RA and two computers need an internet connection (or a very long on the shared modem ethernet cable or a very long cable series of P2P)
See
Start > search... Remote assistance
Rob ^ _ ^.
Tags: Windows
Similar Questions
-
I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.
Hi oms1957
I recommend you try these methods
Method 1:
Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.
Here are some links that will help you set up the wireless network
What are the different wireless network security methods?
Method 2:
If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.
Method 3:
Cycle power to the router and check if this is useful.
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Unable to connect on the compuyer using the password after update the Microsoft Patch.
My antivirus software says that I was behind in the patches from Microsoft, so I downloaded and applied these. There was some kind of error and it corrupted my password of the admin account. I type the correct password, but it does not accept it. The only account I use is a non-admin account password. Any ideas?
The only account I use is a non-admin account password. Any ideas?
There are many options built into Windows to help you out of this situation:
- Restart the computer with your repair CD Windows, then use system restore to set Windows to a point when your password has always worked.
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
- Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
- Ask your friendly computer dealer to reset the password for you.
When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.
-
I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)
Hi ddbowers01,
The other shortcut keys work?
Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.
Check the setting below:
a. in the Control Panel, click user accounts.
b. click on change the way users log on or off the power.
c. Click to uncheck use the screen of welcome for a quick and easy connection.
d. click OK.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can't connect to Windows 8 by using the password.
Original title: could not connect to Windows 8
I tried to connect to my computer, but then he says 'this password is incorrect. Be sure that you are using the password for your Microsoft account". I checked carefully, and I don't know that I typed my password. This started to happen when my computer ran out of battery then I plugged in and could not connect later. I even reset my password but still no luck. This computer is new, so I don't know why it does this.
I had the same problem today. After a quick visit to my dealer where I bought my new acer E1-572, he explained that we have for the most part a password with letters and numbers. On my acer, the NumLock is locked automatically. This means that numbers are not added in your password. Try to release the NumLock or by using the numbers in the second row on your laptop. Success!
-
How to use the password - AsSecureString in the script
I would like to invite my script for the Active Directory User ID and password and use it more on in the connection-VIServers script
something like...
$MyAdUserID = Read-Host "enter a user name Active Directory"
$MyAdPassword = Read-Host "enter password" - AsSecureString
# now, I want to connect to a sequence of hosts vSphere5
to connect-viserver < hostname > - the username-password $MyAdPassword $MyAdUserID
It cannot authenticate with the SecureString password
How to make it work?
There is a conversion to use the password.
The easiest way is to use the Credential parameter.
$MyAdUserID = Read-Host "Enter Active Directory UserID" $MyAdPassword = Read-Host "Enter Password" -AsSecureString $cred = New-Object System.Management.Automation.PSCredential -ArgumentList $MyAdUserID,$MyAdPassword Connect-VIServer
-Credential $cred And take a look at the post of Arnim Bulk change your ESX root password, I think that's what you're looking for.
-
Original title: Win7 pro anytime upgrade/Win XPmode.
I just installed Win7 64 bit Home Premium (Retail) on a new PC.
There are a few applications that works properly (or at all) on the new Win7 64 bit PC. (they ran OK on win7/32 and XP/32)
I wanted to try and install on win7/64 PC XPMODE and run these applications from there, when I tried to install XPmode on the win7/64 home premium, the only choice who would have even tried to install was Win XPmode 64 bit (but of course, all this was doomed to failure because XPmode requires Win7 Pro).
I have a 32 bit (Retail) win7 which has been upgraded with anytime upgrade to Win7 Pro.
Can I use the Anytime Upgrade prod. key at least temporarily (I know that this license is for 1 PC ONLY) update the new Win7/64 Win7 Pro, install XPmode 64 bit to see if these applications will run on a 64-bit XP?
If it works I'll tell you how to disable the worm on the old PC Pro and use it on the new PC.
DRM for any help
Hachiko
Hello Jerry,.
Thanks for the quick response.
Yes, you can install the 64-bit applications and also compatible with the version of Windows you have.
You can also check out the article below and see if that helps.
Understanding hardware and software for 64-bit Windows
() See: 32-bit programs on a 64 bit version of Windows ()
http://Windows.Microsoft.com/en-us/Windows7/understanding-hardware-and-software-for-64-bit-Windows
Please do not hesitate to write us again for assistance and we will be happy to help you come.
-
Can't reproduce using the command + option + arrow keys.
Hello
I have a new iMac running on 10.6.3.
I just switched from Illustrator 10 to Illustrator CS3, and I'm a little exasperated. One of the things that is drving me crazy is that I can't take objects using the command + option + arrow keys more.
Why?
Thank you!
Chris.
Trash your Illustrator preferences, restart and try again.
-
I can install windows 7 using the windows vista product key?
I can install windows 7 using the windows vista product key?
I can install windows 7 using the windows vista product key?
Hey angelside
None
You cannot install windows 7 using the vista product key
You can buy windows 7 and then you will get the own product key windows 7 install
read the windows 7 price microsoft below link
http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102
Walter, the time zone traveller
-
is it possible to install a 64-bit version and use the 32-bit license key?
Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...
Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...
As long as they are the same edition, Yes, you can use the same product key to install the 64 bit version of Windows 7 Professional.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Body crashing all the time when I have the shuttle using the J and L keys
Can someone please help? I seem to have really struggling with constant crashes when I try the shuttle well clips using the L and J keys. Any suggestion would be great. Thank you
We have fixed some problems here in the version 9.0.2 update yesterday, can you make sure that you have updated?
-
How to remove the password of security
How to remove the password of security?
Hello
You will need Acrobat to do.
Please visit the following link.
Securing PDF files with passwords, Adobe Acrobat
Concerning
Sukrit diallo
-
I entered incorrect of the apple Keychain security keys please help...
I entered incorrect of the apple Keychain security keys please help...
Just reset Keyring - painless process
- In iOS 8, tap Settings > iCloud > Keyring > advanced. In iOS 7, tap Settings > iCloud > keychain.
- Tap approve with Security Code.
- When asked to enter your iCloud Security Code, type Code forgotten.
- Press Reset iCloud keychain to replace your iCloud Keychain in the cloud with iCloud on your device keychain items.
- Press Reset to confirm. You will be asked to create a new cryptogram iCloud.
-
I can't connect to the computer by using the password.
Original title: windows 7 locked out after several incorrect attempts
I can't connect to my computer toshiba satellite laptop after that my friend unsucessfully tried to guess my password. Now my password is not recognized and I couldn't connect to my own laptop... I have Windows 7 Home premium. I don't have a recovery disk or something like that. Help, please
Thanks for the reply! The message I see is: "the user name or password is incorrect."
I don't think that my password has been changed. I say this because I was the only person who knew the password. Thanks again for your help!If Windows says your password is incorrect, then your password is incorrect. Otherwise, he would say "locked." Here's how to get out of your situation. In light of your statement "I have a recovery disk or something like that." , you must pay close attention to step 8 unless you like taking big risks.
- Set your BIOS so that it uses the DVD drive as its primary boot device.
- Start the computer with your Windows 7 repair CD.
- Press a key when prompted to boot from the DVD.
- Select 'PC Repair' in the menu.
- Select 'Repair' when prompted.
- When you are prompted, select System Restore.
- Configure Windows to a point before your problems began.
- Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
If you do not have a CD to repair Windows (which is also essential to solve the problems of Windows as a pneumatic Jack is to change a tyre) then here are your options:- Burn it on another computer. It takes only three minutes!
- Borrow one from a friend.
- Purchase one here: http://systemdiscs.com/
-
Why thunderbird changed the way it uses the passwords of gmail accounts?
I had put Tbird in place to always ask for a password for each account. That's always good. I could get into my gmail accounts by entering a password every time. My passwords on Tbird have not been registered. A couple of days, I had to reinstall Tbird after a computer problem. I logged into my gmail account and said not to save the password. When I logged on today it cowardly to remember passwords. I deleted them. When it tried to access accounts instead of simply ask a password he has known a rigmarole of 'connection via the gmail account' and I had confirm that Tbird is allowed to access gmail. An extra step every time, boring, but not terminal. BUT Tbird and then SAVES PASSWORDS, leaving my email accounts exposed, it's much more serious. I tried to remove the passwords, but then we went through the whole process and he did save yet. I don't want to add one master password (yet another thing to forget). I don't want Tbird automatically connect to each account every time that I load it. I DON'T want to control what he reads, and when he reads. What can I do to return to the configuration of the old?
Since the version of Thunderbird 38 uses OAuth2 for authentication of Gmail accounts. It is the only way to be considered "safe" by Google.
http://TechCrunch.com/2012/09/17/Google-OAuth-2-0-for-Gmail-and-talk/Basically, you authenticate with your Gmail account, once, and Google provides you with an authentication token. That's what Thunderbird records under "password". It is not your Gmail password. The token will expire at some point, you will need to again in the future.
If you want to revert to the old behavior allows Google you jump through some hoops.
You must allow 'less safe apps' in Google, or turn your settings on 2 stages of authentication in the context of a specific application password.
https://support.Google.com/mail/answer/78754In Thunderbird, account settings change "authentication type" "normal password" for your Gmail account.
You like.
Maybe you are looking for
-
Mobile project for external hard drive is not free HD space
Was working on a major project and got a caveat that my internal HD was almost full. FCPX get very laggy. So I moved several large projects HD internal HD of the iMac to my external movie player, following all the instructions on how to do it. Everyt
-
PC crashes at startup with 0% update message
turned on & automatic windows update has started & says do not turn off - 0% complete for 3 1/2 h can (cont/alt/del) & tried esc stop-off for several minutes in still works the same * Title *.turned on & automatic windows update has started & says do
-
I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer. whenever I start it the pc his usual routine, but then I saw the following message... USB device to t
-
Director of Windows the difficulty to save projects
I have some different memory cards I want to add to my project. I pull a file from the beginning of the map a new project to add video files and then I have to close the program to eject the card and I lose the file. should I save it as a movie? and
-
Cisco WAPP551 cannot reset and timeout error
I try to go to a WAP551 of Cisco, but gives an error: "the server to 192.168.1.245 takes too long to respond." We have reset it but the problem persists. We have 2 WAP551 of Cisco and both have the same problem. We are unable to access the configurat