Use of the COMPENSATOR for SSD

Similar Questions

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• How does the predator AG3 used together the 128 GB ssd and hard drive 2 TB

  I am considering buying a predator AG3 at Costco.  It comes with a 2 TB HDD and ssd 128 b.  How the system is used both in combination?  The ssd is only for boot?  Windows will be on the SSD.  The system will know to go on the HARD disk for programs not on the SSD drive?  I have no experience using a system with two disks of a different type.

  SSD is usually used as installation of the OS and some heavy load programs (editing - audio - video)

  HARD drive is used as data storage or install programs of large size (for most games).

  System does not know where you want to install it that way, he asks during installation

  example of

  C:\Program Files\gamenameXYZ

  You can tell the installer to use instead of C: on SSD HARD drive, so you will change from C to D (if your HARD drive is D: letter of the system)

  D:\Program Files\gamenameXYZ

• use of the server for executable files VI

  Hi all

  I tried to find a good explanation and example usage of VIserver to launch executables on client PC (XP) via a LAN to a PC (Win7) process controller. Basically, what I found for the controller is specified in this code snippet:

  

  The following was placed in the .ini file of the target at the time of construction to allow VIserver using an executable file (?):

  Server.TCP.Enabled = True
  Server.TCP.Access = "' + * '"
  Server.TCP.port = 3364
  Server.TCP.ACL = "290000000A000000010000001D00000003000000010000002A10000000030000000000010000000000"
  Server.VI.Access =""
  server.vi.callsEnabled = True
  server.vi.propertiesEnabled = True

  If a reference to an instance of application LV is open on the computer command on a specified port, and then a VI reference target

  for the .vi file (another instance?) opens on the same target for manipulation of knot VI. So what was lost for me is the executable

  I am trying to run the file. May not be wired to the terminal way to "ref Open VI". This implementation requires the .exe version and the version of VI

  I am trying to run the code? I launched with success of executable files over a LAN using plink with a script file. Problem is that I can't find a way

  get the target executables once loaded. There is most likely a C solution for this (I'll take it if anyone knows!), but since has VIserver of tools

  to control the execution, I would use it. Also, I want to understand the version of VI of the programme and the .exe in this case (s) link

  Version. Any help would be greatly appreciated.

  lb

  Ben OK,

  Your messages made me a technique to load with distance and running an exe file, built in LV8.5:

  1. to load: the controller emits a "tasklist" command to a target. The objective produces an output file of tasklist which is read by the controller. If it concludes that the target is already loaded, the controller will execute it with an invoke command node 'run a VI '.

  2. If the target is not loaded, then a script file is executed on the target via plink of the controller. This command will also start running.

  3. all the subVIs must reside on the target, as you said, even if (as in my case), the target has no LV Developer Suite installed. I placed Traoré versions of files and folders to exe in the same folder.

  4. the .ini file in the compilation has changed as shown in the first post of this thread. No special settings were used in the compilation.

  This probably isn't the exact technique you had in mind, but it doesn't seem to work... Thanks again for your help.

  lb

• Its use and the demand for capacity

  Hello ps vRO community,

  I love ps vRO and there are many things that I would like to know. My question is why the workload (always) shows memory usage greater than demand and capacity, however there is no pretense.

  Thanks for the help,

  

  If the workload was 100% and its use has been 100% you would really use all the capacity of this virtual machine. If the workload was 120% and its use was 100%, you will have to add 20% more memory to meet the demand for this virtual machine.

  If the workload was 25% and its use was 100% you would really use 25% of this memory. You still have plenty of ability on the virtual machine, and depending on how stable that is 25%, you could probably reduced the memory of half and still be okay.

• Use of the hostname for connectivity through client in 10 g

  Hello
  Can someone please clarify the use of the host name and the name of the comic? I mean, currently, we use Oracle 8.0.5 where clients are connecting to the database using the host name, for example "root"... but now we intend to migrate our database to 10.2.0.1 where in phase when we created the database with the same name is to say 'root' test oracle does not allow this as in error that the name of the comic cannot b name host... now I want to know is possible in 10g that we can use the host name to connect to DB through customers?
  
  This issue requires urgent attention as we migrate our database as soon as possible.
  
  Thank you

  I guess you mean host naming (now called Easy Connect):

  http://download.Oracle.com/docs/CD/B19306_01/network.102/b14212/naming.htm#i498306

  Werner

• OSB - How select variable used in the routing for buss request message. serv.

  I have "modeling of a stream of messages to a proxy service.
  According to the content of the incoming request message, a (conditional) branch is selected. The message must be routed to a business service in this branch.
  This service of the company has a different message definition requires that the proxy service. A kind of transformation is probably necessary. (not yet implemented)
  Question is how to choose what variable structure (I created a variable of Interface Service for business) that will be used during the call to the sales department.
  Only thing that I can choose, the service and operation.
  
  How to continue?

  The payload for the service of the company must be in the * variable $body. There are also other variables pre-defined as $header and $attachments that could make sense if your need to send SOAP headers or accessories for business service.

• Use of the filter for the simplest needs Expression

  On the project I'm working on, I use rule Manager to evaluate hundreds of rules against the simple events based on a table alias (a line at a time, as the documents are). However, my needs are evolving to support multiple sets of rules that would be assessed against incoming data conditionally. It will also be managing versions of rulesets.
  
  These requirements do not appear to correspond to the way that rules Manager stores its rules, where all rows in a table of the Rule are always evaluated, and any creation of a new category of rule requires a new table, recall stored proc etc... I am mainly concerned about the proliferation of tables of the class rule I added new sets of rules. Given that I don't use any of the advanced features that offers of management rules on the Expression of basic filter functionality (for example the complex events), I'm looking for in a simple ExpFil of installation and use of the EVALUATION operator. This will allow me to store several rulesets in the same table of expressions (separated by a field of type or ruleset_id) and does not require as much structural work to add new sets of rules.
  
  Things seem to work very well in my first attempts, but I think that my main question is proc PROCESS_RULES of RM doesn't on the optimization of the assessment of the rules in the rule Manager - no additional optimization which is not offered by the basic functionality of ExpFil? Everything I do is a simple query to find the rules corresponding to a specific document:
  
  SELECT cr.*
  OF COMP_RULE_TEST cr, doct DOC_TABLE
  WHERE doct.doc_id = 123
  AND EVALUATE (cr. RULE_COND, FApprcomp.GetVarchar (doct.rowid)) = 1;
  
  Thank you!

  Hello

  Simple rules, there no notable performance only difference between Manager rules and filter expression. Please ensure that the indexes are created for the Expression column (they are automatically created for the rule Classes).

  Just to be complete: If you want to use several data structures and to define simple rules on the structures of the individual event, you can set a rule to structure class composite event and not really to define complex rules. For example, a rule configured for the table attributes class two alias, po and if maybe two simple rules that are associated with the simple event matching.

  Rule condition 1:
      
          
      
  
  Rule condition 2:
      
          
          
  

  For a new line in the associated table of attribute "po", rules defined with the name of the corresponding event are evaluated.

  Hope this helps,
  -Aravind.

• Z10 BBZ10 10.3.2.440 blackBerry software ruined my use of the telephone for calls

  Hi people,

  I wonder if anyone can help me with this.  Since I upgraded to software BBZ10 10.3.2.440, when I slide the phone to answer my calls it is 7-10 sec delay on the ability of the other person to hear me.  In addition, there is a delay by tapping on my screen for the passwords and email.  Anyone else having this problem?  Is there a solution?

  Thank you very much!

  How long it has been since you last updated?

  Did you do a simple restart appropriate since?

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• Any available adapter to allow the loading and use all the earphone for iphone 7?

  How can I recharge my Iphone and used my set for Iphone 7 ear piece? When I load my iphone 7, the port of lightning and I can't use the the ear piece. Please notify any available adapter?

  Hello

  Solutions for charging your iPhone using wired headphones also include:

  • IPhone dock
    • If you have a headphone with a 3.5 mm jack, you can charge your iPhone and listen to music at the same time.
    • http://www.Apple.com/shop/product/MNN62AM/A/iPhone-lightning-dock-black?FNODE=97
  • Lightning Audio Belkin + load RockStar™ - coming soon - will allow you to charge your iPhone, just as listening to music through a wired headset. It supports the use of:
    • The EarPods (or other headphones), equipped with lightning connector.
    • Headphones with a 3.5 mm jack plug, when connected through the lightning to 3.5 mm Jack adapter (that comes with the iPhone).
    • http://www.Belkin.com/us/F8J198-Belkin/p/P-F8J198/

  Other accessories can follow in time Apple or third-party manufacturers.

  When purchasing an accessory for your iPhone, make sure that it is a true Apple product, or that - as Belkin product - it has been certified as made for iPhone (IFM).

• Outlook Express using only the French for the spell checker. No other language available.

  Outlook Express has been installed with the English language.  Yesterday (29/10/2010, the spelling checker gave me the words only French.)  Choose Options on the Tools tab normally would allow me to reselect English - BUT THE ONLY AVAILABLE LANGUAGE IS FRENCH.  I don't see/understand how this would have changed.  Any Solutions or Suggestions to get this reset to ENGLISH?

  Outlook Express is part of your operating system. Do you mean that you have installed Microsoft Office/Outlook?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install 2007 Microsoft Office system:
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use MS Word spell checking in Office 2007. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Pavilion dv7t-3300: install the kit for SSD dv7t

  You want to install an SSD.  Have the naked reader.  Need for cables, screws, software cloning.  Recommendations?

  To make the SSD the boot drive, you have to move around the main Bay. Only drives in this Bay are bootable. The good advice above to support hardware and software of cloning. There is a single cable that carries data and power so that you do not need anything anyone else.

• I am used by a PC that allows to make a vidio comference, movies, etc. using internet.also I want to use the operating system as yours. What are the minimum requarments that you made to obtain maximum use of the Pc for intention to top with the help of Wi

  What is the pc suitabel for me?

  The current Windows operating system is Windows 7. All new computers (except for netbooks that are yet to come with XP) will come with it. Most of the new computers will be able to do what you want without any problem. For the video-conference, consider buying a laptop with a built-in webcam. If you are looking for a desktop computer, make sure that any webcam that you buy is supported in Windows 7.

  Windows XP is an operating system very well, but it's two operating systems behind now. Was there a particular reason you want to use XP? MS - MVP - Elephant Boy computers - don't panic!

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye