How to enable the AHCI for SSD on M6-1010TX laptop computer HP

Similar Questions

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• How to enable the AHCI for HP Envy M6 1205dx.

  I just bought a Samsung 250 GB SSD EVO. One of the important things to do is to activate the AHCI. I can't find this option in my BIOS. How can I activate it?

  Hello

  This is the default option in the BIOS.

  Kind regards.

• How to enable the AHCI in HP pavilion dv6700t?

  Hello

  I was wondering if it was possible to enable the AHCI on my pavilion dv6700t.  Chipset intel is a much older model, P965 of 2008 but still works fine.

  In Manager devices, under IDE ATA/ATAPI controllers, he says that the ich8m-e/m sata AHCI is enabled.  It is reasonable to assume that AHCI is therefore already activated? I have no way to do it via the BIOS, which limited configuration options. It's the PhoenixBIOS l58.

  I am considering installing a SSD as my boot (and only) and I read that the AHCI is important for functions such as the NCQ, etc..

  Thanks for your wisdom!

  Jason

  Hi, Jason:

  Yes, that's correct.

  AHCI is enabled by default.

  This is why everyone struggled to install XP on laptops. AHCI drivers must be loaded before installing XP at the prompt F6 or slipstreamed into a copy of the XP Setup disk.

  Now... you can do whatever you want, but I don't know of anyone on this forum who has installed an SSD in any model dv6000/dv9000 Series notebook.

  If you know it's possible, thanks for posting back after installing a SSD and let us know how you did.

  Paul

• Satellite A100 - 906 (PSAA9E) how to enable the ahci?

  How to enable ahci on this laptop.
  Debian Lenny

  * lspci: *.
  + 00:1F.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 family) SATA IDE Controller (rev 02) (prog-if 80 [Master]) +.
  + Subsystem "": Toshiba America information systems Device ff10 +.
  + Control: I/o Mem - BusMaster + SpecCycle-MemWINV-VGASnoop-ParErr-Stepping-SERR-FastB2B-DisINTx-+
  + Status: Cap + 66 MHz + UDF - FastB2B + ParErr - DEVSEL = medium > TAbort - < TAbort - < MAbort > - SERR - < PERR-INTx-+
  + Latency: 0 +.
  + Interruption: axis B routed to IRQ 19 +.
  + Region 0: Ports i/o to 01f0 [size = 8] +.
  + Region 1: Ports i/o 03f4 [size = 1] +.
  + Region 2: Ports i/o to 0170 [size = 8] +.
  + Zone 3: Ports i/o to 0374 [size = 1] +.
  + Region 4: Ports i/o to b 18-0 [size = 16] +.
  + Features: [70] power management version 2 +.
  + Flags: PMEClk - DSI-D1-D2-AuxCurrent = 0mA SME (D0, D1 - D2-, + D3hot, D3cold-) +.
  + Status: SMB-Enable-DSel D0 = 0 = 0 SME DScale-+.
  + Kernel driver used: ata_piix +.
  + Kernel modules: ide-pci-generic, ata_piix, ata_generic +.

  * cat/var/log/dmesg | grep NCQ: *.
  + ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) +.

  In the BIOS there is no parameter 'AHCI' or 'Native Mode '.

  Who is to blame and what to do, gentlemen?

  Hello

  The AHCI is enabled if there is no option in the BIOS.
  The controller AHCI (SATA) HARD drive need a driver SATA to install an OS system on the HARD drive.

  I put t know what it takes to Linux but on Windows operating system, you must install the SATA driver, which is part of the Intel storage Manger.

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.

• How to enable the CACHE for all LOB data

  Hello
  
  I want to activate the CACHE for all LOB in my database - 10.2.0.4
  
  Does anyone has generic script to activate the cache for all TRADES
  
  Thank you

  You should be able to write some dynamic SQL code. This will set each BUSINESS in the current schema CACHE

  DECLARE
    l_sql_stmt VARCHAR2(4000);
  BEGIN
    FOR lobs IN (SELECT * FROM user_lobs)
    LOOP
      l_sql_stmt :=
        'ALTER TABLE ' || lobs.table_name ||
        ' MODIFY LOB( ' || lobs.column_name || ' ) (cache)';
      execute immediate l_sql_stmt;
    END LOOP;
  END;
  

  Justin

• HP 15-AC044TU: how to enable the wifi/connection wireless network in my laptop HP 15-AC044TU win-7 64-bit

  I can't activate the network wifi/wireless connection on my laptop HP 15 - AC044TU win-7 64-bit. I found no adapters wireless network / wifi drivers on the hp site. where can I find it? the key that is used to toggle the wifi?

  Please solve my problem FSA.

  Thank you.

  Hello:

  You need these drivers for W7 wireless and bluetooth for your model...

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• How to enable the administrator account with no any other account "computer administrator"?

  Dear Sir/Mam

  I had two administrator account. But I disable default account "Administrator".

  After that, I remove the membership to the 'ADMINISTRATORS' group to another administrator account named "LIB".

  Now 'LIB' is the only member of the 'USERS' group he has permission to change members 'DIRECTORS '.

  and not to create a new user.

  Tell me please how me eneble now my Defaul 'Administrator' or the change in the composition of the "LIB" to the "ADMINISTRATORS".

  groups.

  Follow the methods here:

  How to connect as an administrator in Windows XP?
  http://WindowsXP.MVPs.org/Admins.htm

• Can I upgrade to SSD with Compaq Presario V3000? If so, how to activate the AHCI?

  I have an old compaq presario v3000. The hard drive failed and I would like to upgrade to an SSD if possible in the hope of improving performance. My laptop does support an ssd? Also, I read on a ssd that bios have an option to enable the AHCI? I don't think my bios has this option. Any help would be greatly appreciated.

  Thank you

  The service guide shows only 2 GB maximum memory installed.

  SATA IDE to AHCI passing via regedits

  For safety reasons make registry changes by hand instead of download the script.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• Use of the COMPENSATOR for SSD

  Can someone enlighten me on how to use the TRIM for my SSD function? According to Windows, the TRIM is enabled. What I need to know, is if it is a function that is called and executed automatically by the system? Or is this something that I need to manually call as a routine preventive maintenance (similar to the use of defragment)? Thanks for any advice.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Useful information for SSD users with NVIDIA motherboards:

  Even if the Trim is enabled in Windows 7, mothers nForce NVIDIA cards do not send the order to the SSD TRIM.

  You can uninstall the well Nvidia controller in Device Manager and install the controller IDE from Microsoft, that allows to send commands to COMPENSATION for SSDS.

  Head to the Device Manager (menu start open, type Device Manager), and click on "IDE ATA/ATAPI controllers" and you will see 3 Nvidia Serial ATA Controllers. Right click on one of them and click on 'Properties' and go to the tab 'Pilot' 'Update Driver '. Click on "Browse my computer", then "Let me choose". You will see the option to choose "Standard dual channel PCI IDE Controller". Click this button and click on 'Next' and let it install.

  Do the same for the other Nvidia controllers in Device Manager, and then restart your system. After you have installed the controllers, you will be asked to restart again.

  SSD will have now a slight performance gain with the TRIM command, and ordinary hard drives also have a slight increase as well.

  I have an ASUS P5N - D 750i SLI motherboard and now my Trim actually works.

• How to enable "mode Hibernate for windows 10.

  Hello

  How to enable "mode Hibernate for windows 10.

  Thank you very much

  Unit: Satellite Pro R50 - B - 10 G

  Hello

  Mode what do you mean exactly: standby mode standby or Hibernation or hybrid?
  You can enable or disable hibernation using the invoked command: powercfg
  start cmd.exe in admin mode!

  Activate the Hibernate in Windows 10: the command prompt enter: powercfg-h on

  Disable the Hibernate in Windows 10: enter in the command line type: powercfg-h off

• Cannot find the option to enable the AHCI in the Bios Veriton X 275 settings.

  Hello

  I just installed a Samsung SSD, but could not find the option to enable the AHCI in the bios Veriton x 275 (small form factor desktop). Cuurently boot OK IDE but AHCI is supposed to be superior to the SSD.

  Help appreciated

  As you have noticed, there is no AHCI in the BIOS, only RAID and IDE.