Use of the high memory in Windows Vista

Similar Questions

• Use of the high memory on Windows 7 without reason...

  Hello, I had recently a few problems with my computer after going on vacation for a week and turn it off.  When I got home my computer has had some problems of high memory use, I have no idea why.  I looked in my processes tab and it shows that Svchost.exe as the highest [150K] usage, but is not a lot to slow down computers.  Nothing else under it attracts a lot of use, I tried to disable my anti-virus [Norton] and it still didn't work.  All my drivers are up to date.

  Data sheet:
  
  
  Dell Inspiron 560 [2009]
  No upgrade graphics card
  64 bit
  Pentium Dual-Core CPU E5700 @ 3.00 GHz 3 .00GHz
  4.00 GB memory installed
  
  

  Hi Daniel,

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Scan your computer by using the Microsoft Security Scanner by clicking Download now to check if there is no virus:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  Optimize windows 7 for better performance:

  TP://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance HT

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• When I put the virtual memory in windows vista is it ok! to enter the same size (MB) the initial size and maximum size boxes example 2877 (MB's) entered the two box?

  When I put the virtual memory in windows vista Home premium is ok! to enter the boxes the same size (MB) "initial size and the Maximum size" example 2877 (MB's) entered in each box for initial and maximum size?

  Yes, you can do it. The minimum must be large enough to contain an image of the core. If the maximum is too small, you will get the unpleasant results.

  This article has some tips on the size of the page file at the end.

  http://blogs.technet.com/b/markrussinovich/archive/2008/11/17/3155406.aspx

• use of the high memory in the database of node cluster 2

  Summary of environmental

  Cluster nodes RHEL6.4/11.2.0.3.0/ASM/2

  free m

  total used free shared buffers cached

  MEM: 32096 31723 372 0 238 16277

  -/ + buffers/cache: 15206 16889

  Swap: 16383 178 16205

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head - 10 Thu Feb 27 16:32:15 2014

  4.8 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  mem % 0.0 4.0 ps EI - o, % cpu, cmd

  ora_lms1_orcl2 19.6 1.3

  ora_lms0_orcl2 19.6 1.3

  /etc/kannel.conf 0.2 0.9/usr/sbin/bearerbox

  asm_vktm_ 0.9 0.0 + ASM2

  ora_vktm_orcl2 0.8 0.0

  /opt/app/Java/JDK1.6.0_12/JRE/bin/Java 7.7 0, 7-server-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  2.5 0.7 /opt/app/java/jdk1.6.0_12/bin/java-Djava.util.logging.config.file=/opt/app/csdtomcat/apache-tomcat-6.0.35/c

  /U01/app/11.2.0/grid/bin/ocssd.bin 0.3 0.7

  SQL > select value, name from v$ sysstat whose name like '% gc.

  THE VALUE NAME

  ---------- ----------------------------------------------------------------

  398431945 gcs sent messages

  24465773 gc cr block served

  92438 flush time gc cr block

  52157 timeout reading gc

  100272 expected read gc

  failures of reading waiting 0 gc

  15 gc waiting read timeouts

  77789637 blocks of courses gc served

  826771 gc block pine time

  130755 block course gc flush times

  51119356 blocks of cr gc has received

  5027865 gc cr block receive times

  61272732 blocks of course gc has received

  4268980 block of course gc receive times

  181763086 local grants of gc

  56125079 grants remote gc

  716839431 gc sent kilobytes

  101203847 gc saved KB

  30105492 compressed blocks of gc

  blocks of gc lost 0

  blocks of claims gc lost 0

  0 gc corrupt blocks

  0 gc CPU used by this session

  0 player gc bypass grants

  time of generation 0 gc cr block

  0 gc cr block send time

  current block 0 gc send times

  Node-1

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head Thu Feb 27 - 10 17:19:47 2014

  16.3 51.7 /opt/netvertexp/java/jdk1.6.0_12/jre/bin/java-serveur-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  6.5 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  0.0% mem 5.0 ps EI - o, % cpu, cmd

  2.2 0.0/usr/sbin/tcpdump bond0 w s port 65535 /root/pcapprimary/netvertexp-27Feb_17_15.pcap 3868-i

  /U01/app/11.2.0/grid/bin/ocssd.bin 0.4 1.4

  19.5 1.2 ora_lms1_orcl1

  19.5 1.2 ora_lms0_orcl1

  ora_dbw1_orcl1 19.7 0.9

  ora_dbw0_orcl1 19.7 0.9

  ora_vktm_orcl1 0.9 0.0

  Node-2

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head Thu Feb 27 - 10 17:19:07 2014

  4.8 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  mem % 0.0 3.0 ps EI - o, % cpu, cmd

  oracleorcl2 0.1 2.5 (LOCAL = NO)

  ora_lms1_orcl2 19.6 1.3

  ora_lms0_orcl2 19.6 1.3

  /etc/kannel.conf 0.2 0.9/usr/sbin/bearerbox

  asm_vktm_ 0.9 0.0 + ASM2

  ora_vktm_orcl2 0.8 0.0

  /opt/app/Java/JDK1.6.0_12/JRE/bin/Java 7.7 0, 7-server-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  2.5 0.7 /opt/app/java/jdk1.6.0_12/bin/java-Djava.util.logging.config.file=/opt/app/csdtomcat/apache-tomcat-6.0.35/c

  How to troubleshoot the depth to find the cause of the heavy memory usage. ?

  Thank you

  hitgon

  Hello

  vmstat-s

  This will give a more detailed overview. Search for active/inactive values and used swap. If active memory is close to the total memory and you have a larger amount of used swap, then you might have the memory pressure.

  If the Exchange is not used much, and you have the right percentage of inactive memory, then linux could easily swap memory without a performance problem. In this case, the pressure of memory is very likely.

  For a report very detailed on the use of single process

  PMAP pid - x

  M and the press allows you to sort by memory use. If you are using pmap on bigest processes, then you should have a good starting point was that your memory has disappeared.

  Concerning

  Thomas

• Use of the high memory - system idle

  Hello world!

  I have a problem of large memory with esxi 3.5 on my server to test at home.

  I'm under a Core2Duo on an Intel 965 Board. Storage controller is an Adaptec 2910SA.

  As the performance with 4 Windows VM (1 x Server Core as MS, 1 x Server 2003 WSUS Server, 2 x Server 2008 file server) was very poor, I doubled the memory of 4 GB to 8 GB. Unfortunately, the performance is still very poor and I wonder that the memory usage is to 5GB with no virtual machine performance.

  I read a lot these days and tried a number of things as the allocation of resources system, but nothing has worked.

  Should I do when the upgrade of memory? Maybe change a file of configuration or something like that?

  Thanks in advance and best regards,

  Steve

  Hello

  Welcome to the VMware community forums.

  You don't have to do anything about it either beyond adding memory in your machine, so no need to change additional settings.

  I read your topic before and remember that it has been resolved with an update of the BIOS firmware, but I could be wrong and if so, I hope someone will correct me.

  If you start a computer virtual is the memory usage goes up? The reason I ask is because I wonder if it's just an aesthetic matter.

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• Use of the high memory when multiple tabs are open (and closed)

  When I open Firefox memory usage is around 70-100 MB RAM. When I work with Firefox I often open 15-20 tabs at once, then I close them and open others. Increaes of use up to 450-500 MB RAM memory. After the closing of tabs use decreases normally, but after some time. He begins to decrease very slowly and never returns to the level from the beginning. After a few hours Firefox uses about 400 MB of RAM, even if only one tab is open. First I thought it's because of my plugins (Firebug, Speed Dial, Adlock more) but I have checked and it is not. I reinstalled Firefox but the problem occurs as well. I don't know if this is normal. Could you help me, please?

  Hello

  Not an exact answer, but please see that. Article questions through various General situations that may or may not be applicable to specific cases, but could nevertheless be useful.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista.

  I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would also like to use Adobe .dng files in files. VISTA has native free codecs for the same. Please season a solution?

  original title: Micorsoft Camera Raw Codec

  As far as I lnow... the following codec pack is
  the most current available from Microsoft.

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  The following retail software is not Microsoft
  but maybe worth a visit:

  FastPictureViewer Codec Pack
  http://www.FastPictureViewer.com/codecs/

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• I using Madden 2004 and Emachine with windows Vista aT5064. It will not install on second disk

  I using Madden 2004 and Emachine with windows Vista aT5064.  disc, it will bring up a screen with options for more information, installation, play, udate and quit smoking.  When I drive during installation it says unistall, when I choose the game he wants the game disc, when I put in the second disc there is an error asking if I want to play the game without sound (check the drivers) and when I choose Yes

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Please give me the download link for windows VISTA oem

  Please give me the download link for windows VISTA Home premium 64 & 32 BIT please, are the links for oem? I need OEM. I got the license but no installed operating system and therefore cannot know which of the vista is. You know a way to find the license of numbers/letters, please. Thank you for your valuable contribution

  Best regards

  Gerry

  Hello

  If Vista is preinstalled and is not bootable, contact the computer manufacturer and ask them.

  You should have a SN (serial number) on the case.

  There is no Windows Vista downloads available from Microsoft.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I need to reinstall window Vista Home Basic on my desk because of the infection by the virus. There is no CD with the PC input. Where can I get the free download for window vista?

  Where can I get the free download for window vista?

  Hello

  1. What is the problem you are having with your desktop computer?
  2. are you using a computer Original Equipment Manufacturer (OEM) or custom it was installed?
  If you use a PC OEM, then contact the manufacturer of your computer to get a recovery disk or restore the computer by using the recovery partition.
  Refer,
  http://www.Microsoft.com/OEM/en/salesmarketing/pages/media-replacement.aspx#fBid=rGc5iuLr9zB
  If you use a Custom / copy the retail of windows, then you can contact the Microsoft Store and provide your room and demand for replacement media number to be sent to your address.
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246
  See also,
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-order-replacement-Microsoft-products-and/fb8230d4-000F-4ee7-b732-c9f8fff28bfd
  Hope this hleps.

• The size of the base operating system Windows Vista on my Aspire 3680 282 is larger than 20 GB, is this normal

  The size of the base operating system Windows Vista on my Aspire 3680 2682 is larger than 20 GB, is this normal?

  Hello

  Yes; It's normal.

  In addition to the original operating system, you have updates, restore points of the system (set at 15% of the capacity of the hard drive) etc, etc.

  It will continue to grow.

  If you are worried about anything whatsoever, do a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  You can download this program for FREE and see what fits on the disc.

  http://www.Jam-software.com/treesize_free/

  And always scan your system for malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Why can I not use my old genuine copy of windows Vista on my new pc?

  Windows vista on new pc

  Why can I not use my old genuine copy of windows vista on my new pc?
  I received an activation message and I don't know what to do

  If your Vista came pre-installed in your old PC, then this is an OEM license that cannot be transferred to your new PC.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Why is there no option to burn pictures on a dvd in the photo gallery for windows vista

  I try my best to find a way to BURN a DVD of my photos that I had downloaded in windows live photo gallery, or windows photo gallery.
  I even try to find a way to burn pictures on a DVD via windows developer.

  NO LUCK.
  It isn't even an option anywhere to BURN a DVD.
  There are options to post on twitter or facebook, NO I need or can use.
  There is even an option to copy on my computer, I do not need.

  I have a lot of photos that are on windows live, and all I have to do is burn or create a DVD, so I can send it out, but there is simply no option for this?

  I have windows VISTA BASIC.

  "I checked up on top of the windows for the info site, and he mentions to click on the" "burn the dvd icon" ", but IT is there NO SUCH BOTTON of CLICK ON MINE :>>>

  I hope someone could help me with this frustrating problem

  Vista Basic does not include Windows DVD Maker.

  If you want to burn a data DVD, you can use Windows
  Media Player, check the following links:

  Windows Vista - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you want to burn a video DVD that will play like a movie
  in a free-standing DVD player... you need Authoring DVD
  software.

  First... Create your slideshow video with Windows Movie
  Manufacturer and publish (save) in the. Film WMV format.

  Windows Vista - put on the road with Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Then you need DVD Authoring software to create video
  DVD... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.