Use several days in the calendar area

Similar Questions

• I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  I've updated to Sierra, na not use iCloud, now I see all of my dates in the calendar are gone!

  If it was in iCloud, turn, if they were not, tell us where they have been

• Several copies of the calendar (more than 20) running simultaneously in Windows sidebar

  Windows Sidebar running several copies of the calendar 1.1.0.0. When I try to remove the gadgets, the screen freezes. Unknown, how the spouse got this many copy works like that on his laptop; and I am at a loss on how to reduce/elimate this gadget and the downturn, that it is creating.

  I have manually run all scans of Windows Defender and AVG antiviral, no problem. I noticed that his Defender has been configured to carry out daily checks, the last before today, it was 28/02/10. Unknown why/how that could have been stopped. After removing box in the start menu, the computer seems to work "normally". However, once the side bar is enabled, delays begin.

  Appreciate any help on this one. Not too well informed in this area.

  FOLLOW-UP:

  Another post 'Can you help me with my sidebar problem' had some tips to try. I did all the registry commands, and they are all successful. I then tried to rename the Settings folder in the sidebar to ".old"; and said I couldn't do that, that the case was "ongoing execution in another program"

  Sidebar not working, at least as far as I could tell. Nothing in the status bar, and I'd already removed since starting foder.

  Don't know if this will help. I'm stumped on this one from relyy.

  TRACK 2:

  Renamed Calendar.Gadget to Calendar.Gadget.old

  Add new folder inside Gadgets foler, named OLD.

  Calendar.Gadget.old moved OLD folder.

  Sidebar started without calendars of 30 or more. Problem solved.

  TRACK 2:

  Renamed Calendar.Gadget to Calendar.Gadget.old

  Add new folder inside Gadgets foler, named OLD.

  Calendar.Gadget.old moved OLD folder.

  Sidebar started without calendars of 30 or more. Problem solved.

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena

• don't forget the select result of a statement to be used several times in the procedure

  Hi all

  I'm sorry for this kind of question, I'm not newbie, but still need your help.

  My need is remember the select result of a statement to be used several times in the procedure.

  My first guess is to use a temporary table, but I think there's better decisions.

  For example, I should make a heavy request

  Select the code from table_function (param1)

  Then, this query is used to insert a list of the id in table1, delete table2 and update in table 3.

  Help me please do not use if possible temporary tables.

  If there is more than one column, you need to create an object type at the database level. Create a collection of this type of object in the procedure.

  Example:

  CREATE OR REPLACE TYPE "OBJ1" as OBJECT(
          column1 varchar2(256 CHAR),
          column2 varchar2(35 CHAR)
          );
  
  CREATE OR REPLACE TYPE "nt_obj1" as table of OBJ1; -- this could be done at procedure level as well
  
  DECLARE
     t_employee_ids   nt_obj1;
  BEGIN
     SELECT OBJ1(column1,column2)
       BULK COLLECT INTO  t_employee_ids
       FROM table1
      WHERE column3 = NNN
  .............
  .....
  

• Marking blocks of days in the calendar

  I use a Macbook Pro running OS X Yosemite version 10.10. 5, but the question applies also to my iPad and iPhone.

  The calendar works fine for the appointment or notice that last less than a day, but I would like to be able to display the time of "blackened" on a certain number of days and to be able to do this in colors different for different "appointments", but who will all see the when I look at the calendar.

  It's a matter of business practices. I am managing coverage of office for a group of people, so I would be able to run a red line through five days to show that Bob will be absent from the Office for this period; and to be able to have a yellow line, which can also be spread over a few days and who may or may not overlap with line out of Bob, to show that Lyn will be out of the Office these days and a blue line for David in the same way.

  So far, I have found that I can set up AN appointment that will remain visible as a line (by putting the cursor on the first day of absence by dragging the cursor to the last day of the period of absence and then titling the "appointment" something like "Bob away"). But if I try to do it with someone else (i.e., I try to add an another "stuck on the protohistory' with a line), and then disappears from the line of Bob and I see David - which isn't much help because I need to be able to see all absences at the same time. (Since I have not found possible to add a second line to all, I obviously also not found anyway to incorporate it in a different color.)

  Is it possible to do this, please? Immensely grateful if someone cracked it.

  Kathy

  This includes covering several events of the day

  Calendar (Yosemite): Events make last one or several days

• I just open WMP after several days, and the files do not load. The message says that the search for media files.

  I opened the Windows Media Player after several days of not to use.  Files won't load.  It is said that there is no element in the library.  I'm going to add to the library, and there is nothing there.  I add places to watch, say OK and leave.  When I come back it is empty again.  How can I return my library and playlists?

  Sounds like a corrupt media library that can be fixed by resetting it. To reset, follow the instructions for WMP 11 Vista at http://zachd.com/pss/pss.html#medialibrary . Tim Baets
  http://www.BM-productions.TK

• How can you determine what the user watch calendar view (month, week, day, list) the calendar of CSS (5.0)

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  BillH104 wrote:

  We run Apex 5.0.1.00.06 and I would like to add a region to a page, if the user displays the LIST of the CSS calendar view. I can't understand how to determine which view the user displays currently. Is it possible to determine to create a condition to show another region in they are on a particular view?

  This can be achieved using some dynamic measurements, to hide the region if the calendar is the display month view when loading the page and to show/hide the region when you click the list/month selector.

  Add a static region ID to region calendar for use in jQuery selectors.

  Name: See the region list - load

  Event: Loading the page

  Condition: Expression of JavaScript

  Value:$('#static-region-id .fc-month-view').length > 0

  Real Action

  Action: Hide

  Selection type: Region

  Region:

  Nom : See the region list - click

  Event: Click

  Selection type: jQuery Selector

  jQuery Selector:.fc-button-group button

  Condition: Expression of JavaScript

  Value:$(this.triggeringElement).hasClass('fc-list-button')

  Real Action

  Action: Show

  Selection type: Region

  Region:

  
  

  Action of false

  Action: Hide

  Selection type: Region

  Region:

• Use of analytics in the Plugin area request

  Hi all

  I created a region using the Gannt chart plugin.  I use the analytical function of LEAD in the area of SQL to return a date, which runs OK apart from the Apex, but she seems to be breaking the Gannt chart (running OK with SYSDATE).  Has anyone encountered this before?

  Thank you

  Mike

  Thanks for making the effort to create the example.

  I have not previously encountered this plug-in, but after comparison with the original on page 68 of the packed app P-Track, has determined that your plug-in area of the Gantt chart had three problems:

  1. Main was that you had not specified an Element of Page Start Date in the plug region of Gantt chart settings. This is why the date of beginning for the default chart current. However, all the events of your data set began and ended before today, so none of them could ever appear on the chart! I created an element of date of P1_GANTT_START_DT with the default value to_char(trunc(current_date, 'MM'), 'DD-MON-YYYY') to display the graph since the beginning of the current month and used in the parameter table.
  2. You had not also specified a Period Type Page element parameter, causing the chart is rendered monthly resolution by default. As the length of your events is only a few days the actual durations are not clear. Some events are best seen at the level of the day or week. I copied the selector control period of the page P - Track Gantt for graphic resolution will be replaced by the appropriate level.
  3. As I suggested above, the function of leader in your source query was computing not worth end_date for the last line, so that this event was not displayed on the table. The LEAD function has an optional third parameter that can be used to specify a value by default when there is no value at the specified offset. You need to set this to any value is determined by your needs. For the purposes of this example, I set myself to return the last day of the month event:

  select hdr_no
       , line_no
       , receive_date start_date
       , LEAD (receive_date,1,last_day(receive_date)) over (ORDER BY receive_date) end_date
       , asset_id
       , notes
  from gannt_test
  order by
    start_date
  

• How to use a function switch box to the reference that is used several times in the previous drop-down list options?

  I use JavaScript coding in LiveCycle and development of dependent drop-down areas, but I find it difficult to write correct code. See the example below. I'm trying to use a multiple box function that refers to an option that is listed several times in the previous pull-down menu. The problem I am running into is that when I refer to any color or Nissan and Chevy, it returns the results of the color in the "Ford" column only. I'll always see color (blue, black, green and purple) options in my second drop-down list and it seems fine, but then the third drop reference only the options and colors 'Ford '. (I don't have the code for the third menu list drop-down).

  I want the client to choose Chevy or Nissan and have her drop downs (based on the color they chose)-dependent, but I can't seem to make this work.

  I hope it is clear enough (probably as mud...). I would appreciate help!

  Form1. #subform [0]. #subform [1]. cboModels::exit - (JavaScript, client)

  cboColor.clearItems ();

  {Switch (this.) RawValue)}

  case "Ford":

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  case 'Chevy ':

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  case "Nissan":

  cboColor.addItem ("Blue");

  cboColor.addItem ("Black");

  cboColor.addItem ("Green");

  cboColor.addItem ("Purple");

  break;

  }

  Form1. #subform [0]. #subform [1]. cboColor::exit - (JavaScript, client)

  cboPrice.clearItems ();

  {Switch (this.) RawValue)}

  case "Ford":

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  case 'Chevy ':

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  case "Nissan":

  case "green":

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  cboPrice.addItem ("blah");

  break;

  }

  You can use '\n' for newline in a string, so

  "Option 1, \nOption 2, \nOption 3;

  Put each on its own line.

  Bruce

• customizaing no days in the calendar of the adf

  Hi all

  I use jdev 11.1.1.2. My requirement is not display 7 days standard. I want that user can select the number of days he wanted to see the data. How to achieve...

  Try this

  Display the data for 15 days and 30 days in af:calendar in ADF. Techartifact | Techartifact

• Change of blackBerry Smartphones first day of the calendar

  I want to change the first day of the week.  I looked around in the menus of the storm, but I don't the have not found.  Where can I change the first day of the week in the monthly calendar view?    Thank you

  Open the calendar, press the menu key, search 'options' and select it, choose 'General Options '. You should be able to understand the rest .

• File navigation on OS x using openDlg() - why all the folders are grayed out?

  I am configuring a file and folder browsing dialog that works for the two Win/OSX and with filters to narrow the search to specific file types dialog box. I received a lot of help from another user on the forum (Matias Kiviniemi) in order to obtain the function of filter working - but now I have another problem: a little strange.

  When you browse the files under OSX, all the folders are greyed out!

  You can always navigate (somewhat) via the Favorites list and directory tree button at the top in the Center, but actually clicking in the records does not at all.
  
  

  I also tried saveDlg() to browse the files, but I have exactly the same problem with greyed out records. SaveDlg() is not the second parameter (the filter function) to restrict the dialogue to a specific file type - which is something that I need.

  // Utility functions for checking if the OS is Win/OSX
  function isWindows(){
      return app.systemInformation.indexOf("Operating System: Windows") >= 0
  }
  function isMac(){
      return app.systemInformation.indexOf("Operating System: Mac") >= 0
  }
  
  
  // All params below are strings
  function promptFile(dialogMessage, dialogType, extFilter, oldPath){
  // Description: Opens up a file or older dialog window for browsing (Win/OSX)
  // Returns: Absolute path (string) to the file or folder that was picked by the user
  
  
      // File
      if (dialogType == "file"){
  
  
          // Create filter function for the File.saveDlg -function
          var filter = null
          if (isMac()){ // OSX
              if (extFilter){
                  var filter_regex = new RegExp("[^\.]*\."+extFilter+"$")
                  filter = function (file_entry){
                      return filter_regex.test(file_entry.name)
                  }
              }else{
                  filter = function(){ return true } // All and any file(s)
              }
          }else if (isWindows()){ // Win
              if (extFilter){
                  filter = extFilter.charAt(0).toUpperCase() + extFilter.slice(1)+"-files:*."+extFilter
              }else{
                  filter = "All files:*.*" // All and any file(s)
              }
          }else{
              filter = null
          }
  
  
          // Create file dialog
          var path = new File(oldPath);
          // var dialog = path.saveDlg(dialogMessage, filter); // Same kind of error with saveDlg
          var dialog = path.openDlg(dialogMessage, filter, false);
  
  
      // Folder
      }else if(dialogType == "folder"){
          alert("folder diag:\n" + oldPath);
  
  
          // Create folder dialog
          var path = new Folder(oldPath);
          var dialog = path.selectDlg(dialogMessage);
          while (dialog.alias){
              dialog = dialog.resolve.selectDlg(dialogMessage);
          }
      }
  
  
      if (dialog){
          return dialog.fsName.replace(/\\/g, "/") // Back to Front slashes
      }
  }
  

  I'll cross post since my last response to the other crossed the moderation and released after you posted this (and it is relevant for this topic)

  There seems to be backup dialog boxes _SEVERAL_ versions

  • file_entry.saveDlg (): file_entry content is the default value, but do not know if he has locked her
  • File.saveDialog (): same as file_entry.saveDlg, but none value of screening. Maybe it is not locked to original dir
  • folder_entry.saveDlg (): looks identical to file_entry.saveDlg, do not know if there is a difference.
  • Folder.selectDialog: seems more versatile, "simply to choose a file.

  You probably just do some trial and error to choose one that fits, what are the rules everyone has. So far I think Mac has no option for "create a new file, but only this extension." Extension filter only seems to apply to existing opening and win (although even there, he hides just, you can actually set different extension in her typing).

  Confusion between the part which is the "grayed out of all cases" it would imply in fact wants the filter even though the docs say it is not. I.e. you'd need to do a filtering function that accepts two folders or files with right like below (not tested)

  filter = function (fileSystemEntry) {}

  If {(fileSystemEntry instanceof file)

  Returns true

  } else {}

  return filter_regex.test (fileSystemEntry.name)

  }

  }

• Virgins of the days in the calendar at the end of a month

  Calendar in OSX on a regular Mac, every end of month continues seamlessly in the following month if the last week of the month end and the first week of the month start appear like a week continues

  In calendar, in iOS, like on an iPad, each month ends with empty days such as the last week of the month end ends on a single line with the first week of the month begins on the next line.

  As a result, that an event that fills the end appears to 'break' at the end of the month.  It is visually distracting and I can't find an option to set the schedule of the iOS, so it looks the same as OSX calendar

  Is this one?

  There is no option to change the which unfortunately. IOS users just need to deal with it or find a third-party calendar that is more to their liking. (There is a reason that I do not use a lot of calendar application)

• Applications using cmd + tab switching does not work (reverse return) when you use several spaces in the Sierra

  I usually have a lot of apps open it in full screen across a number of different areas.  In El Capitan, when I used cmd + tab to switch apps, it would just go directly to the application in the entire app was opened in.  Now, he tries to switch to the app, but then IMMEDIATELY switches to the space, in that I was already.  It's like if someone is sitting there playing this cruel on me joke where whenever I try to go to the app, it shows to me and then immediately sent me immediately.  Everyone knows something similar to this?

  To re-create the problem, have a few apps open it in full screen in different spaces, then try to switch to another application in another space using cmd + tab or try to switch to an application that is just open on the main office space.  It comes immediately rebascule on your original app!  I'm ready to tear my hair out!

  Feedback: Apple http://www.apple.com/feedback/

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/