Use the Interface of the Scanner in gray

Similar Questions

• After the upgrade to El Capitan, I get "the scanner is attributed to ImageCapture. Using the scanner with TWAIN? What to say?

  I have XP Epson-610 and have scanned on it successfully for years. To date, but when tried to open I get the ap scanner, the scanner is attributed to ImageCapture. Using the scanner with TWAIN? ImageCapture does not work on El Capitan? What is TWAIN, a printer-scanner driver?

  Thank you.

  TWAIN is an old scanner interface. OS X now use ICA, Architecture (?) of Capture of Image.

  Never seen this message, but I guess that means Capture of Image is using the scanner, or is configured to use the scanner and it is not necessary for the third party software. You open picture Capture, or did the scanning software provided with the scanner by Epson?

• How to use the scanner as a scroll

  Hello

  I have lenovo e40-70, how to use the scanner as a scroll wheel?

  This issue has developed before and unfortunately the software Lenovo does not support.

• I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.

  I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.  When I use their "fix", it turns out that my screen blue and green. Aid others?

  Your support for the product is unfortunately - the manufacturer of the product.

  Suppose you tried everything here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=306884&prodTypeId=18972&ObjectID=c00802504

• Vista 32 bit does not display the Epson NX230, but I can use the scanner of this part.

  I just bought an Epson NX230 because my ip2600 canon is not print anything.  When I load & install Epson the O. S says it is not found.  It's an all in one and I can use the scanner.  I tried to uninstall the old driver but the comp is suspended.

  Any ideas?

  Hello

  1. How do you try to install the drivers?

  2. What is the message exact error do you get when you install the drivers?

  I suggest to follow the steps provided and check if this can help,

  Method 1:

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: If the problem persists then uninstall and reinstall printer driver software in your computer from devices and printers and programs and features.

  Step 1: To uninstall the driver scanner devices and printers:

  a. click the Start button, select Control Panel and click on devices and printers. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. right-click on the printer driver, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  Step 2: To uninstall programs and features, follow the steps in the link below:

   Uninstall or change a program

  Note: Restart your computer. Then, install the latest drivers for the printer.

  More information: Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• I DON'T KNOW HOW TO USE THE SCANNER

  I HAVE A HP PHOTOSMART 5514 AND HAVE NEVER USED THE SCANNER.  I NEED TO KNOW WHERE TO INSERT THE DISK MEMORY.

  Thank you

  You have solved my problem.  Thank you very much.

• Why can I not use the scanner function if my ink cartridges are not installed properly?

  The scanner allows just as one scanner I have another product of HP that I use for my printing needs? My all in one (C4580) there is an error that indicates that the ink cartridges have not been installed correctly. I have not used this printer as printer in a long time, but use it as my primary scanner. Is there anyway I can overide the "Cartridghe Print badly installed" so I can use the scanner function? Thank you for your help

  You can find information on how solve the error associated with cartridge you have about your Photosmart C4580 paper here.

  With most of the printers HP if there is a visible error on the printer screen it only lets not to copy, scan or fax.

  I hope this helps.

• I can't use the scanner in the Oki C5510 all-in-one printer.

  Original title: Oki C5510 all-in - One Printer

  Hi I have a problem with OKi c5510mfp. Downloaded recommended for the device and the scanner driver is not being picked up, even if the printer works. OS is windows 7 64 bit. It worked on this laptop before, new hard drive was installed and cannot use the scanner since.

  Help please
  Adrian

  Hi Adrien,.

  1. were you able to install the drivers successfully?

  2. do you get any error code or error message?

  3. what security software is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Try scanning using fax for Windows and scan feature and check if it works.

  Scan a document or photo with Windows Fax and Scan:

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  If the steps did not help, then it would be best to contact the printer manufacturer for assistance.

  Hope the information is useful.

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• Director of HP, or other software that allows me to use the scanner OfficeJet G55 on Windows 7 64 bit

  Hello!

  Does anyone know if there is HP Director, or other, available software that allows you to use the scanner on an OfficeJet G55 attached to a 64-bit Windows 7 system?

  Just found out: the driver supplied with Windows 7 does support analysis thus and scanning feature is located under "devices and printers".

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• Using the scanner rather than generic software WIA support PES 9

  Updated PES 9 a couple of weeks. Already got PSE6.  With PSE6, with my Canon LiDE90 scanner, when I chose import on the file menu and import selected from a scanner, I gives me the option to use the WIA interface or software compatible WIA Canon Scan Gear which has more controls. With PSE9, the only option when I select the LiDE90 is to use the generic Windows WIA driver.

  I can, of course, to use the Canon scanner software apart from PSE9 and send the file to PSE9 for editing. That works very well, but what I don't like about the digitization of this way, is that a temporary file should be created by the scanner software which is saved immediately and then load that into PSE9.

  With PSE6 when to use Scan Canon material in PSE6, the scanned image has been loaded in PSE 6 as a new image without title. If I chose to delete the scanned image, that I edited rather than save the file, there is no temporary file has been saved on the disk at all. I much prefer this work sequence.

  SOOOO... How can I get the Canon Scan Gear software optionally via the PSE9 file - menu import? I tried to reinstall PSE9 and reloaded the scanning Canon driver, too. No luck so far. Why Adobe would have FEWER options with a software upgrade?

  Technical details: Toshiba laptop running Vista 32 bit with all updates.

  If you need the TWAIN driver from Adobe, you must move it in the optional plug-in folder are in the folder plugins ol ' ordinary, as explained in the linked higher tech doc in this thread.

• I KNOW THAT MY DRIVERS ARE OKAY. WHEN I TRY TO USE THE SCANNER I READ THE SLEEP OF THE PC BUT NOTHING IS GETTING PAST, WH

  I KNOW THAT MY DRIVER ARE OKAY, BUT WHEN I TRY TO SCAN SOMETHING I GET ALL 'PC STANDBY' MESSAGE BUT NOTHIING HAPPENS MORE ANOTHER MESSAGE IN MY MONITOR THAT INDICATES THAT THE SCANNER IS NOT CONNECTED OR UNABLE TO LOCATE HIM, WHAT SHOULD I DO TO FIX THIS?

  SINCERELY

  BENJAMIN MONGE

  MY PRINTER IS A THREE FUNCTION PIXMA MX410 I BOUGHT IN SEPTEMBER OR AUGUST 2012, AND I ONLY USE IT FOR HOME. MY COMPUTER IS AN HP WITH a MICROSOFT WINDOWS VISTA HOME PREMIUM, AMD Athlon (tm) 64 X 2 Dual Core Processor 2.0 GB.  ATI RADEON X 1050 secondary.

  Sincerely.

  Benjamin Monge.

• LJ m1120MFP and MacOS 10.7.3 - How to use the scanner? Is this possible?

  Scanner is not located in the system. Printer works fine. The driver version is 1.3.0.261

  Just to add, the product indeed no longer scan while using Lion, you will find also listed by the document of support for HP below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02925114#A2

  To work around the problem, try checking any 3rd party scanning solution like Vuescan, that support the scanner.

  It will be useful,

  Shlomi

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support