use the rman channel
Hellowhy we use rman channel. ?
Concerning
user13367819 wrote:
Hellowhy we use rman channel. ?
Concerning
When you run rman backup/restore operation must create according to session. Thus the creation of these session to assign channels.
Handle: user13367819
Status level: Beginner
Join date: July 6, 2010
Messages total: 44
Total Questions: 29 (22 pending)
Why you do not close your questions answers if they actually answered?
Close the thread as answered and mark message correct/useful.
Tags: Database
Similar Questions
-
Create database pending active using the RMAN Duplicate command
Hello guys,.
I created the database before using the RMAN Duplicate command, but here I am stuck.
Please help me to overcome this >
RMAN > run {}
2 > allocate channel prmy1 type disk;
3 > allocate channel prmy2 type disk;
4 > allocate channel prmy3 type disk;
5 > allocate channel prmy4 type disk;
6 > allocate auxiliary channel stby type disk;
7 > duplicate target database for the eve of the active database
8 > spfile
9 > parameter_value_convert "orcl", "orclstd".
10 > set db_unique_name = "orclstd".
11 > set db_file_name_convert = "/ orcl / ', ' / orclstd / '.
12 > set log_file_name_convert = "/ orcl / ', ' / orclstd / '.
"13 > set control_files="D:\app\employee3\oradata\ORCLSTD\control01.ctl ', 'D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl '.
14 > set log_archive_max_processes = '5'
15 > set fal_client = "orclstd."
16 > set fal_server = "orcl".
17 > set diagnostic_dest =: \app\employee3'
18 > set db_recovery_file_dest = a: \app\employee3\flash_recovery_area'
19 > set standby_file_management = 'AUTO '.
"20 > set log_archive_config ='dg_config = (orcl, orclstd)"
21 > set log_archive_dest_2 = 'service = orcl ASYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd';
{22 >}
allocated channel: prmy1
channel prmy1: SID = 70 type device = DISK
allocated channel: prmy2
channel prmy2: SID = 135 type device = DISK
allocated channel: prmy3
channel prmy3: SID = 191 type device = DISK
allocated channel: prmy4
channel prmy4: SID = 7 type of device = DISK
allocated canal: stby
channel stby: SID = 129 type device = DISK
From 7 November 12 Db double
content of Script memory:
{
backup that copy reuse
TargetFile "E:\app\RAJKUMAR\product\11.2.0\dbhome_1\DATABASE\PWDorcl.ORA" auxiliary format
"D:\app\employee3\product\11gr2\DATABASE\PWDorclstd.ORA" targetfile
' E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEORCL. ORA' auxiliary format
' D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA';
clone of SQL ' alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD." ORA "«;»
}
execution of Script memory
From backup 7 November 12
Backup finished in 7 November 12
SQL statement: alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA "
content of Script memory:
{
clone of SQL 'alter system set audit_file_dest =
"E:\app\RAJKUMAR\admin\orclstd\adump" comment =
' ' scope = spfile;
clone of SQL 'alter system set dispatchers =
''(Protocol=TCP) (SERVICE = orclstdXDB) "comment =
' ' scope = spfile;
clone of SQL 'alter system set db_unique_name =
"Orclstd" comment =
' ' scope = spfile;
clone of SQL 'alter system set db_file_name_convert =
"/orcl/", "/orclstd/" comment is
' ' scope = spfile;
clone of SQL 'alter system set log_file_name_convert =
"/orcl/", "/orclstd/" comment is
' ' scope = spfile;
clone of SQL 'alter system set control_files =
"D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_max_processes =
5 comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_client =
"Orclstd" comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_server =
"Orcl" comment =
' ' scope = spfile;
clone of SQL 'alter system set diagnostic_dest =
"D:\app\employee3" comment =
' ' scope = spfile;
clone of SQL 'alter system set db_recovery_file_dest =
"D:\app\employee3\flash_recovery_area" comment =
' ' scope = spfile;
clone of SQL 'alter system set standby_file_management =
Comment by "AUTO" =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_config =
Comment by "dg_config" (orcl, orclstd) =. =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_dest_2 =
"service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment =
' ' scope = spfile;
clone to stop immediately;
startup nomount clone;
}
execution of Script memory
SQL statement: alter system set audit_file_dest = comment "E:\app\RAJKUMAR\admin\orclstd\adump" = "' scope = spfile
SQL statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE = orclstdXDB) "comment ="' scope = spfile
SQL statement: alter system set db_unique_name = comment "orclstd" = "' scope = spfile
SQL statement: alter system set db_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
SQL statement: alter system set log_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
SQL statement: alter system set control_files = "D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control
02.CTL "comment ="' scope = spfile
SQL statement: alter system set log_archive_max_processes = 5 = comment "' scope = spfile
SQL statement: alter system set fal_client = comment "orclstd" = "' scope = spfile
SQL statement: alter system set fal_server = comment "orcl" = "' scope = spfile
SQL statement: alter system set diagnostic_dest = comment "D:\app\employee3" = "' scope = spfile
SQL statement: alter system set db_recovery_file_dest = comment "D:\app\employee3\flash_recovery_area" = "' scope = spfile
SQL statement: alter system set standby_file_management = comment "AUTO" = "' scope = spfile
SQL statement: alter system set log_archive_config = "dg_config = (orcl, orclstd)" comment = "' scope = spfile
SQL statement: alter system set log_archive_dest_2 = "service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment = "'s
face = spfile
Instance Oracle to close
connected to the auxiliary database (not started)
Oracle instance started
Total System Global Area 1071333376 bytes
Bytes of size 1375792 fixed
528482768 variable size bytes
Buffers data 536870912 bytes
Redo buffers 4603904 bytes
allocated canal: stby
channel stby: SID = 63 type device = DISK
content of Script memory:
{
backup current controlfile to standby auxiliary copy format ' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
Restore clone controlfile to ' D:\APP\EMPLOYEE3\FLASH_RECOVERY_AREA\ORCLSTD\CONTROL02. CTL' of
' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
}
execution of Script memory
From backup 7 November 12
channel prmy1: from data file copy
copy of the control file ensures
name=E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL output file. ORA tag = RECID = 1 STAMP = 798743550 TAG20121107T171229
channel prmy1: datafile copy complete, duration: 00:00:03
Backup finished in 7 November 12
From restoration to November 7, 12
channel stby: copy of copy of control files
Restoration finished November 7, 12
content of Script memory:
{
SQL clone 'alter database sleep mounting database';
}
execution of Script memory
SQL statement: alter database mount rescue
output channel: prmy1
output channel: prmy2
output channel: prmy3
output channel: prmy4
exit canal: stby
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 07/11/2012 17:12:40
RMAN-05501: abandonment of duplicate target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01 auxiliary file name. DBF conflict with a file used by the target database
RMAN >
Thank you
Reverchonuser9192565 wrote:
11> set db_file_name_convert='/orcl/','/orclstd/' 12> set log_file_name_convert='/orcl/','/orclstd/'
RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01.DBF conflicts with a file used by the target database
The strings that you entered in your file name conversion settings does not match where actually your data files. If the string does not match the names of files, there is no names of files to convert. Because you're on windows, how about something like this?
set db_file_name_convert='\ORCL\','\ORCLSTD\' set log_file_name_convert='\ORCL\','\ORCLSTD\'
Hope that helps...
Patrik
-
How to save a database to use the RMAN catalog using the OEM 11 g grid
How to save a database to use the RMAN catalog using the OEM 11 g grid?
---------------------------------------------------------------------
Enterprise Manager Version: 11.2.0.2See the availability tab, and then click 'Recovery catalog settings' under the Backup/Restore Configuration.
Choose the option 'Use Recovery Catalog'. Click the 'Add Recovery Catalog' button to add the recovery catalog. And fill required fields like username, host, port, sid, etc..
Talip Hakan Öztürk
http://taliphakanozturken.WordPress.com/ -
Continuous signal creation (using the PFI channels?)
Hello
I am new to the use of OR and its interfaces. I use the USB-6221, with its C API.
I need to create multiple channels of continuous digital output with the cycle of the frequency and the duty.
I used DAQmxCreateCOPulseChanFreq for the crt0 and crt1 channels and it works fine, but I need a few lines.
Can I use the channels of the PFI (PFI0-4 for example) for this purpose?
With the help of the DAQmxCreateDOChan I can set the PFI desired channels as DO, but how can I create the signal desired on these channels?
Best regards
Danny.
Howdy Danny!
If you try to build a train of digital pulses with a frequency cycle and specified duty then using counters shipped from the USB-6221 is certainly the way to go. Unfortunately, as you have discovered there are only two meters of material available on the USB-6221 (Ctr0 and Ctr1).
Fortunately, you can also use the digital output lines to efficiently create a train of pulses with a frequency cycle and specified duty. You will need create a table of examples which, when released at the specified sampling rate, looks like a period of your waveform. For example, if my sampling rate is 1 MHz and I want to create a square wave of 100 kHz and a cycle of operation of 20% low high/80% I would generate the following examples:
{1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
Please let me know if this description is clear or if there is anything I need to explain more in detail.
Kind regards
-
recover the database by using the RMAN backup archivelogs
Hello
I tried to find the resolution of this problem in google a lot but couldn't find something useful.
Location:
We try to clone the dev environment of production that are completely on different servers and do not share a common mount point.
Backup RMAN of PROD with RMAN as well as arch newspapers are kept in this mount point.
We took control of backup files of PROD restored in DEV fired restore with recovery until a when not.
Turns out that the sequence was not saved in right backupsets there if recovery has not requested more arch newspapers that are present in the PROD.
Archs are stored in ASM and only way out is to take of RMAN backup of them.
We control the file as a repository for RMAN.
my questions are
1. surely, I need to take backup of the control file after I take the log arch by RMAN backup and restore this file command in the DEV of so that when I start RMAN recovery in DEV, database will be able to find the backupset with arch newspapers. But the new restore a control file will delete the data files restored information?
2. If we did not have a point of common Assembly and then after sending the backup destination elements how the database would be the locations of the game copied to the new location of the control file that is restored from the backup source?
Suppose that in the source backups are stored in/backup/rman
in destination copy us in/backup/clone
in the PROD control file, their locations are saved in/backup/rman
so if I restore this command file in custom DEV it find the elements of backup in/backup/rman?
is it possible to save a backup of outside item in the control of a database file?
3 al ' ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance? (sending of newspapers without DR)
The help is very appreciated.
Kind regards
Marjorie Dutta1. .... But the new restore a control file will delete the data files restored information?
N ° provided that you do not have renamed, moved or abandoned any of the data files that were already copied in DEV. (also, subject that you did not add da new Production data between two backups - otherwise the new controlfile file will wait as datafile also to be present at DEV).
You will do an incomplete recovery until a certain SNA / sequence # if information subsequent archivelogs beyond your point of recovery in the controlfile are redundant. In addition, a RESETLOGS would be done when you OPEN the database.2... how to know the locations of the game copied to the new location of the control file that is restored from the backup source database?
What is the order CATALOG. In 9i, CATALOGUE could only of catalog datafilecopy. In 10g and more, you can BackupPieces CATALOGUER. Thus, it would "update" the controlfile (which is the RMAN Repository) with information about the BackupPieces that are present in a replacement / new location.
See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref2303. ... ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance?
According to the version you are using, ASMCMD has a 'cp' command to copy the files from the DSO for the operating system. However, you cannot use ASM to apply directly the archivelogs. You always use the 'RECOVER' of RMAN or SQL command line command.
Hemant K Collette
http://hemantoracledba.blogspot.com -
XML part that is customized by using the HTTP channel
Hi all
I have obligation where 2 partners will display a custom XML (same pattern for both partners) load via a B2B http url.
I need your help to configure the generic Http channel for both partners and based on a particular value in the payload, respective contract should be triggered.
Currently, I get error Protocol for Identification of Document.
Help, please.
Thank you
Monica
Please make sure that the IP address, you receive as part of HTTP header is the same as that configured.
Concerning
Nebot
-
Duplicate RMAN cloning using the database using the current database
Hi all
I am new bie, I want to clone my target database using the rman command 'DUPLICATE database OF ACTIVE DATABASE"new host.
steps on google, I searched, but I got confused, I doubt if you need to install oracle rdbms softare on new host or not? and also should I copy all files (redo, control, datafiles) to the new host? kind LY help and tell me the steps to clone the database using rman.your help will be appreciated.
Thank you.
Kind regards.
OS: RHEL 5.4
DB: 11.2.0.3
Hello
Have you not through document link to Gavin at least. It's very simple steps. If you wait until other measures, then won't them.
He had provided the demonstration, at least get in 'google' (you'll have so many links)
The Oracle Dba Italian Blogger: how to clone an Oracle 11 g 2 home
http://balaoracledba.com/2013/12/16/cloning-an-existing-Oracle11g-release-2-RDBMS-installation/
Note: If you feel always complex, better skip the task itself.
-Thank you
Pavan Kumar N
-
Restore the RMAN backup on another server
Hello
ENV: Oracle 10 g 2 64 bit, RHEL 5.8 64 bit on ASM, Database size = ~ 1.3 to
Backup RMAN of PROD will FRA and then backed up to tape. I have limited access to the PROD because it is maintained by 3rd party.
My client is planning to move this database on their own datacenter (from the 3rd party data center). For test purposes, I asked DBA of 3rd party to provide us with an export of drawings required data pump. Export takes about 8 hours, and the import takes the same time to the new location. To copy the files exported to new locations takes another few hours (over the network). The total size of the dump file is around 500 GB. Thus, a whole cycle of Export-Import-copy takes about ~ 20 + Hrs.
I want to try another option to reduce the time required for the updating of the database of PROD and which is "use RMAN backup of PROD ' and restore it on the data center server. RMAN full backup takes ~ 4hrs PROD and the restoration should be at the same time (new server has better and faster HW, storage with a SSD). I found this thread very useful on the Oracle Forms on this topic:
Restore backup RMAN on another server
This thread contains very good example for a restoration of database on the file system.
I have a bit of confusion because my database uses ASM. The default location of the backups in PROD is FRA (on ASM == > db_recovery_file_dest = + FRA ). If I understand correctly, the RMAN backup must be in the same place where he was on the PROD Server - i.e. the diskgroup FRA.
If I get a copy of the part 3 RMAN backup, how would I copy on FRA?
OR can / should I just change the init parameter "db_recovery_file_dest" on the new server to point to the file system directory where the backup (say "/ ora_backup") and RMAN will pick up and restore the database?
Please advise!
Best regards
You can restore the backup files to any location, then you must configure the channel using the "CONFIGURE CHANNEL device type disk format 'new location ';
This thread will help
Restore from a different location from the original location of RMAN backup
-
Let the RMAN to know the location of the backup during RMAN DUPLICATE item
RDBMS Version: 11.2.0.3
Platform: AIX 6.1
I spent a few discussions lately about the creation of standby DB by using the RMAN DUPLICATE method.
Taking an example from a thread by steve74 yesterday.
The commands below are executed after copying the elements of hot backup of the primary DB Backup on the standby server.
The auxiliary instance is just in NOMOUNT. Lets say I copied the primary DB Backup items to the--- Will be running the following DUPLICATE command from standby server export ORACLE_SID=orcldg SQL> startup nomount pfile='/u01/app/oracle/11.2/db_home1/dbs/initorcldg.ora' rman target sys/mypass@PRIMARY_TNS auxiliary / run { allocate channel C1 device type disk; allocate auxiliary channel C2 device type disk; duplicate target database for standby nofilenamecheck; }
following in the standby server location
I don't see all the above commands which allows to RMAN knows about this place where are stored the backup pieces. For regular DB cloning, we are cataloging of backup items using the CATALOG command. But, you need a control file to do cataloging. The auxiliary instance does still not have control file. So, how this work?/u04/backup/RMAN
Hello
simple. duplicate is a faster and simpler, method because you issue a command.
After configuration, you issue a command, and if the pfile/spfile is properly configured, RMAN takes care of ALL the necessary measures, even for ASM (assuming the switch of data file also). It restores the CF, he set up the db, it restores, it retrieves, it updates the CF with the correct names, it converts file names if necessary, open the DB ETC.
And, since only a single command is used, it is less prone to errors.
And allows you to save a lot of trouble.
Quite simply, you have a few details such as the location of the backuppieces.It works very well also for DEV env refreshes (with a few modifications on the pfile/spfile file).
BR,
jpinela.Published by: Pinela December 21, 2012 16:02
-
Hello, since the alert.log file find this error:
Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc3_25352.trc file:
ORA-19809: limit exceeded for file recovery
ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
ARC3: 19809 creation error archive log file ' DATA01'+.
Sea 25 09:51:58 Jan 2012
Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
ORA-19815: WARNING: 59055800320 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.
************************************************************************
You have choice to free up space in the recovery area:
+ 1. Consider changing the RMAN RETENTION POLICY. If you are using Data Guard +.
then consider changing POLICY of DELETE ARCHIVELOG RMAN.
+ 2. Back up files on a tertiary device such as a tape using RMAN.
SAFEGUARDING RECOVERY AREA command.
+ 3. Add disk space and increase the db_recovery_file_dest_size setting to +.
reflect the new space.
+ 4. Delete unnecessary files by using the RMAN DELETE command. If operation +.
the system control has been used to remove the files, and then use the RMAN DUPLICATION and
Commands DELETE has EXPIRED.
************************************************************************
Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
ORA-19809: limit exceeded for file recovery
ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
ARC0: error creating 19809 archive log file ' DATA01'+.
So I'm trying to purge the rman backup, but I have an error message:
rman target = oratest@oraprdlnx1:~$ /+.
Recovery Manager: release 11.2.0.1.0 - Production on sea Jan 25 09:47:30 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: TEST (DBID = 2044700519)
+ RMAN > show all; +.
using the control file of the target instead of recovery catalog database
RMAN settings for database with db_unique_name TEST are:
CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/oratest/product/11.2.0/dbhome_1/dbs/snapcf_TEST1.f'; # by default
+ RMAN > allocate channel for maintenance of type; disc +.
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: SID = 237 instance = type of TEST1 = DISK
+ RMAN > crosscheck backup; +.
"" element of verified backup: turned out to be "AVAILABLE"
backup handle piece = RECID = 68 = 758320264 STAMP DATA01/test/autobackup/2011_08_04/s_758320263.794.758320265 +.
Cut objects 1
RMAN > delete obsolete; ** +
RMAN retention policy apply to the order
RMAN retention policy is set to 1 redundancy
Remove the following obsolete backups and copies:
Making key time filename/handle type
-------------------- ------ ------------------ --------------------
Backup Set 25 July 4, 11
Backup total 25 4 July 11 1omgk64v_1_1
Backup Set 26 July 4, 11
Backup total 26 July 4, 11 1pmgk650_1_1
Backup Set 24 July 4, 11
Total backup, 24 4 July 11 1qmgk650_1_1
Backup Set 21 July 4, 11
Backup total 21 4 July 11 1rmgk650_1_1
Backup Set 28 July 4, 11
28 1vmgk69v_1_1 July 4, 11 total backup
Save game 29 July 4, 11
Backup total 29 July 4, 11 20mgk6a0_1_1
Backup Set 30 July 4, 11
Backup total 30 4 July 11 21mgk6a0_1_1
Save game 31 July 4, 11
Backup total 31 July 4, 11 22mgk6a0_1_1
Backup Set 34 4 July 11
Backup total 34 4 July 11 c-2044700519-20110704-07
Backup Set 35 July 4, 11
Total backup, 35 26mgk8ib_1_1 4 July 11
Backup Set 36 4 July 11
Backup total 36 4 July 11 c-2044700519-20110704-08
Backup Set 41 4 July 11
Backup total 41 4 July 11 28mgk94i_1_1
Backup Set 42 4 July 11
Backup total 42 4 July 11 29mgk94j_1_1
Backup Set 37 July 4, 11
Backup total 37 4 July 11 2amgk94j_1_1
Backup Set 40 July 4, 11
Backup total 40 July 4, 11 2bmgk94j_1_1
Backup Set 38 July 4, 11
Backup total 38 4 July 11 2cmgk95c_1_1
Backup Set 39 July 4, 11
Backup total 39 4 July 11 2dmgk95k_1_1
Backup Set 43 July 4, 11
Backup total 43 July 4, 11 c-2044700519-20110704-09
Backup Set 46 4 July 11
Backup total 46 4 July 11 2fmgk99f_1_1
Backup Set 47 July 4, 11
Backup total 47 4 July 11 2gmgk99g_1_1
Backup Set 44 4 July 11
Backup total 44 4 July 11 2hmgk99g_1_1
Backup Set 48 4 July 11
Backup total 48 4 July 11 2imgk99g_1_1
Backup Set 45 4 July 11
Backup total 45 4 July 11 2jmgk9a9_1_1
Backup Set 50 4 July 11
Backup total 50 4 July 11 2kmgk9aq_1_1
Backup Set 49 July 4, 11
Backup total 49 4 July 11 2lmgk9aq_1_1
Backup Set 51 4 July 11
51 4 July total backup has 11 c-2044700519-20110704-0
Backup Set 56 4 July 11
Total backup 56 2rmgk9qb_1_1 July 4, 11
Backup Set 55 July 4, 11
Backup total 55 4 July 11 2smgk9qb_1_1
Backup Set 58 4 July 11
Backup total 58 4 July 11 b c-2044700519-20110704-0
Backup Set 60 4 July 11
Total backup 60 2umgk9tb_1_1 July 4, 11
Backup Set 61 4 July 11
Backup total 61 4 July 11 2vmgk9tc_1_1
Backs up the entire 62 4 July 11
Backup total 62 4 July 11 30mgk9tc_1_1
Backup Set 66 4 July 11
Backup total 66 4 July 11 34mgk9ua_1_1
Backs up the entire 65 4 July 11
Backup total 65 4 July 11 35mgk9ua_1_1
Backup Set 67 4 July 11
Total backup, July 4, 11 c-2044700519-20110704-0 67C
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
RMAN-06091: any string allocated for maintenance (of a suitable type)
How can I purge the db dest file recovery?
Thank you!!!RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
RMAN-06091: any string allocated for maintenance (of a suitable type)There is a metalink note that talks about this error.
Met RMAN-03002 and RMAN-06091 when deleting obsolete backups [567555.1 ID]
RMAN could not remove obsolete in right Backupsets change Sbt_tape to disk and again Server [ID 1287755.1]HTH
Kind regards
Nagendra ChillalePublished by: NC on January 25, 2012 17:00
-
in some sites, there are two menus in competition and you can't use the bottom menu
I've been using The Shopping Channel years but since I loaded Firefox I can't open certain areas of this site (and other sites). Menus appear to be in competition with each other. There is a regular menu below and a new "BOLD" menu on the top. If I need to look for the customer service, it is blocked by this "BOLD" menu on the top.
I wrote to them several times, but they say that the problem is at my end.You can watch one of the extensions I posted above to increase the zoom of page and minimum font size.
- Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
- NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
-
Re: Satellite L735 PSK0CE: WLan and BT use the same frequency
Hello world
I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth
Can you help me with this problem?
Thanks in advance
Post edited by: aku - aku
Hello
WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.
-
Hello
I develop an application that communicates with a microcontroller. I would like to use the API to frame for a setup where I can send commands and get the answers and want to use the API channel for a mode where I'm simply followed the messages I get from the microphone.
I have a state machine where I starts with the opening of the frame API, have some different States I'll in that use the appearance of the request/response of the API framework, then a State that closes to the API of frame and opens the Channel API. The problem I encounter occurs when I already closed the frame API and began playing with the API channel work. When I click the monitoring button stop, I leave the while loop, who read a message defined in the DB can (havn't had in fact he still read the data) and run the Clear.VI Channel API CAN I get the following error.
Error - 1074388720 CAN Initialize.vi
Possible reasons:
NI-CAN (Hex 0xBFF62110) you can use the frame API and Channel API simultaneously on the same interface (for example CAN0). MAX tools use the channel API. Soultuon: Use a different interface with each API.
I need a way to get around this and I'm not sure why the raster API is not pretending to be closed, especially since I was a State in my state machine to close the frame API before you start using the channel API.
If anyone has any suggestions please let me know.
Thank you
Gary
It is more a question LabVIEW but because its you, here's an example that lets you switch back and exit if you set the output check.
DirkW
-
can not duplicate the audio channel
I shot a video with a video camera Sony borrowed pro. When I transfer a video file in first, it shows an audio left and right channel. My right channel is complete messed up. It comes a with camera input mixing console, set to the wrong setting. So I try to use the left channel only. But, I would like to reproduce and also do it for the right channel. But, when I try to go to the Clip > Modify > Audio > Clip change and try to make the process of change Channel, a large number of settings are grayed out and when I press OK, nothing happens. I'm a total novice at first and look at tutorials throughout the day. The only reason I bought the first was that I had to be able to remove the right side of my audio and duplicate so I can have a mono full its made from the left lane. And I'm totally stuck now.
Use the audio effect of fill from right to the left. You can even use it on the entire track in the effects of mixing (Special part).
-
Hello
10 g R2 on Win 2003 server.
What happens if the RMAN Repository fails?
If we create another repository RMAN how can we use the backup files created before (created with the repository crashed)?
Thank you.Hi user522961,
Yes, you can.
By using the RMAN catalog command.
RMAN > CATALOGUE START WITH '+ '; # all files in a catalogue ASM disk group
or
RMAN > CATALOGUE START WITH ' / fs1/data files /'; # all files in the catalog directory
or
RMAN > CATALOG AREA RECOVERY;See this doc http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/maint007.htm#sthref761
Kind regards
Rodrigo Mufalani
http://mufalani.blogspot.com
Maybe you are looking for
-
What happened to my address bar!
I want to go to a Web site, but I can't because I don't have to type the name of the site in an address bar.
-
Cannot transfer the data of the CR to the host using FTP
Hello Save us from our experimental data in a folder in the CR (pxi-1042 to the pxi controller 8108 RT). Retrieve later us the data to our host for analysis. Now, we used to regularly used to make new folders in RT to reduce the time of llop to read
-
I inherited a large (1000 + screws seems large to me) project TestStand in which many of the subVIs are visible. How to determine by inspection the process used to make a visible Subvi? I am fairly new to this, but I think that there are at least two
-
Declare the array in ResourceFile
I want to declare Array in a resource file for localization, so how to declare the table and retrieve it?
-
Hello My E420s has one slot for SIM on the back, but nothing is really happening when I put my sim card in my phone (with a data plan). I searched Google and also looked through the Lenovo software but found nothing useful. Is there a chance that the