Use to EXCLUDE in HBR

Similar Questions

• Form loses color when I use Pathfinder > Exclude to cut a hole

  I'm just following some instructions on how to cut a hole in a circle transparent, so that the bottom is visible through the hole with the help of Illustrator (CS5).

  This is my starting point. All backgrounds are disassociated from the individual objects, and all are a circle colored with a small white circle on top.

  

  I then selects the white circle (the circle centre is white smaller circles on top one more large colorful circle) and the underlying green circle thus:

  

  I then use the Pathfinder tool and exclude according to the instructions, but it happens:

  

  Any ideas why the color disappeared rather than leave a green hoop with no way?

  If I do this on a clean game of darts, by creating a large green circle, then a small white on top and then Pathfinder / Exclude, it works fine. The green circle now has a hole.

  Thanks in advance.

  I discovered the solution of messing around with the tools of Pathfinder and has decided to leave this place in case someone else has the problem.

  Rather than use Pathfinder > exclude following the instructions, I used Pathfinder > less prominent.  This example uses the foreground object (if you have selected more than one object (i.e. two circles bunk in my example) like a strawberry and leaves behind a transparent hole.)

  The circles are now contours (I know I could have created circles thick contours in the first place, but I inherited file .ai Adobe Stock and therefore had to work with what I had).

  Hope this helps others.

• Essbase Calc Script using Exclude

  I use the 'EXCLUDE' command in a script (see below) essbase calc
  Fix (@relative("Entity",0), EXCLUDE (@MEMBER ("Canada") ENDEXCLUDE)),
  @RELATIVE ("Type", 0), @RELATIVE("Net Income",0), @RELATIVE("BALANCE SHEET",0),.
  @RELATIVE ("CASH FLOW STATEMENT", 0), & CURPER)
  CLEARDATA "GL";
  END FIX;
  
  I keep getting the following error:
  WARNING: parsing formula [statement of DIFFICULTY] (line 14) 1200315 error: invalid object type
  No idea what's wrong with my script? 14 of my script is the line starting with the declaration of FIX. Any advice would be greatly appreciated.

  EXCLUDE is a simillar to FIX calc command and can be used within FIX ().
  In your case, you can use function @remove as shown below:

  Fix (@Remove (@relative("Entity",0), @list ("Canada")), @RELATIVE ("fleet Type", 0), @RELATIVE("Net Income",0),)
  @RELATIVE ("FINANCIAL REPORT", 0), @RELATIVE ("CASH FLOW STATEMENT", 0), & CURPER)
  CLEARDATA "GL";
  END FIX;

• Measurement of temperature using NI USB-6343

  Hi all

  Someone at - he temperature ever measured using an NI USB-6343 or something close to it? Encountered problems?

  I was reading on the device and it has been suggested that the conditioning of signals may not be required, and I'm a little worried...

  Normally I use a DAQ Agilent but this specific project, I'm working on that will require a unique moment and USB-6343 handles a majority of my problems along will be many examples of coding.

  -scrider

  Scrider,

  You want a device that has USB connectivity like the 6343? If so, we have several hardware based USB DAQ for thermocouples. The links below will show 3 devices, we have:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208177

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201881

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207471

  Now, I know that some of them will probably not ideal for your app, but I wanted to just give you options. It also depends on how fast you want your sample rate is. These devices are specific for the use of thermocouple, but you can still use them (excluding the tc01s) for voltage readings. I hope this helps!

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• exclude the binary menu search program start when indexing is disabled

  Platform: windows 7 Enterprise 64-bit

  Research of indexing off

  I have shortcuts on the start menu, put in place to start Matlab with additional command line arguments so that it correctly detects the startup license file.

  However for some reason any on some of our windows 7 computers search for "matlab" in the search on the start menu, displays the usual since the start menu shortcuts, but also an additional entry that points directly to the binary MATLAB to its installation location.

  Problem is that the latter does not have the argumnets of additional to start with license command line.

  How can I exclude search results in the start menu to return the binary link? Note that indexing is disabled.

  This happens on a lab full of windows computers but not on another. The two laboratories perform the same versions of operating system and Matalb.

  Is there a registry setting or what I can use to exclude the binary installed to be returned in the search results?

  Thank you

  Hello

  We have a dedicated team who work in the Enterprise Version. I suggest you ask your question on TechNet link below:

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information is useful.

• Is anyone able to use model filters to search for in the search dialogue files?

  JDev 11.1.1.6

  When this option is checked, regardless of filter templates (included or excluded), the search does not find anything in the search path.

  Tried with all possible models.

  Even if there is no trend at all, the search does not work.

  In fact, research only works if this option is not checked.

  Any advice?

  You can select the types of required file Types of files (files in use Types). For the model, you can use

  Exclude the * / classes / *.

  Exclude the **/.svn/*

  Include *.

  Arun-

• can I exclude statistics and index both at the same time

  Hi people,

  I do big table re-organization, so my question is can I exclude statistics and index at the same time

  I am planing this activity as below, please advise me if I'm wrong.

  (1) create table xx_031114 in select * from xx;   (it's like the precautionary measures)

  (2) export the table xxx using its owner the user yy

  yy/passwd@tnsnames = DIRECTORY expdp export DUMPFILE = xx.dmp = xx LOGFILE = xx.log tables

  (3) to truncate the table or drop table

  SQL > truncate table xx;

  SQL > drop table xx;

  (4) import the table with metadata without statistics & index as below

  Impdp yy/passwd@tnsnames DIRECTORY = export statistical DUMPFILE = xx.dmp = xx = exclude TABLES, index CONTENT = METADATA_ONLY LOGFILE = imp_031114.log (import only meta data without statistics & index)

  
  

  Question 1: can I exclude the statistics and indexes at once?

  Impdp yy/passwd@tnsnames DIRECTORY = export of TABLES DUMPFILE = xx.dmp = xx CONTENT = exclude LOGFILE = imp_dataonly_031114.log index = DATA_ONLY (import data only without index)

  Impdp yy/passwd@tnsnames DIRECTORY = export of TABLES DUMPFILE = xx.dmp = xx include = index (import only indexes)

  2 question: can I import the indexes only as above?

  Thank you and best regards.

  Younus

  for your question: you use the exclude options separate to exclude indexes and statistics

  Question 2: directory of the user/password impdp dumpfile you_dir = your_dump = include = INDEX

  Hope this helps

  concerning

  Pravin

• is it possible to exclude some tables of data pump?

  Hello
  
  I want to exclude some tables while import/export to a single system using data pump. Is this all possible for this?
  
  If this isn't the case, please suggest me for all other ideas too.
  
  Iqbal

  Use the exclude parameter and check the link below.

  http://www.Oracle-base.com/articles/10G/Oracle-data-pump-10G.php

  Concerning
  Asif Kabir

• ASDoc Exclude

  I am currently working on the API for an SDK that we send to employees. There are a bunch of methods and properties that we use internally within our application that do not need to be exposed to external developers.
  
  While I am able to completely cancel the documentation of the methods and functions using @private, I been did not using the [exclude (name = "someName", type = "method")] metadata tag. I tried to put the tag on the inside and outside of the classroom and tried to use () next to the name of method and sometimes not. I had success with the [obsolete] metadata tag remove the appropriate functions and the display of the warning and the tag [ExcludeClass] .
  
  I don't know how much detail I could be missing. Any thoughts?

  Put the tag [Exclude] outside the class definition of the class of the child.

  Stephen

• How to do a full export and exclude specific tables of user

  Hi all
  
  It is possible to export all objects but one (or more) tables with expdp when you perform a full export?
  
  That's what I have in mind: (parfile)
  
  Directory = expdp
  dumpfile = Full.dmp
  logfile = Full.ELOG
  Full = y
  Exclude = table: "in ('userA.table_A')" "
  
  This par file encounters no error messages, but it does not exclude table_A in userA schema.
  I guess it's because that the will use her term is not interpreted as an owner.
  It is not a big deal to filter a table when you perform an export schema.
  
  I wonder if it's possible to do everything except a table from a full export. If so, I had value your suggestions.
  
  Kind regards
  Louis

  Louis,

  The exclude in DataPump parameter only supports the name of object, not the schema name. So, if you have only a table called "TableA", then you can simply use:

  Exclude = table: "in ('table_A')" "

  If you have more than one table called 'table_A', then the exclusion will exclude all the. There is no way to specify with a parameter exclude user_1.table_a.

  Dean

• Modes of reentry

  After reading http://digital.ni.com/public.nsf/websearch/98847B4E4C715E6D86256C59006B57CC?opendocument&Submitted&&... and discuss with other users of LV between that I still don't know what are the differences 'Share the clones between bodies' and 'Clone for each instance of pre-allocate.

  As the second it is preety intuitive to understand the fist one very confusing.

  First of all:

  1. What is shared?
  
  
  2. What is a clone?
  
  
  3. What is the data space?
  
  
  4. What is a forum?
  
  
  5. Why in the article linked above once the phrases 'space data' and ' clone are used synonymously, and for the second time is used as excluding the phrases?

  MimiKLM wrote:

  It means the memory is allocated on the fly but didn't go out the same way?

  For how long the unused clone of VI is kept in memory?

  For "shared clones", the memory is allocated as needed (on-the-fly).  The clones won't be out until the main VI that calls lets remember.  Seriously, go to LabVIEW Journal in the field.  The only reason why I know that this answer is because I just read about it here.

• Performance of Windows 7 is Terrible

  The start of stars are very cute. Windows that fly in and out and also a childhood dream. I love all the pretty icons that change size and color with what you are working on. Borders on windows are beautiful. I can not get used to Windows Explorer that borders a semi transparent and look like someone redacted information that surround it.

  All of these postings make me feel as I moved into a world created by opta. Now that MS has spent a ton of money with all the visual embellishments, how the * can I turn them off so I can get back to work? I don't remember a file of Windows XP, requiring more than an hour to copy from one disk to another. There are not enough hours in the day for me to wait for all this to go on and still do my job. Please no apology from Microsoft and none of the speculation of those who did not actually solve the problem.

  There is no reason the icon is big when I drag and drop to get a copy.  The copy area doesn't have to keep track of every byte transferred.

  Use the Windows classic theme and all these 'good' stuff will fade into oblivion, fortunately.

  R/click on the desktop and go to personalize.

  Regarding speed of Win7 - once Aero is disabled - Win7 is better than XP, more stable and much less

  may need to reinstall after a year or two that XP, but you should always do the same optimizations.

  Run Disk Cleanup and defragmentation of the HARD drive, particularly after the installation of software or Windows updates.

  If you have just installed everything Windows and installed all updates in a defragmentation is going go take a certain time, but the disk cleanup is generally faster than with XP because he no longer has the compress old files option which is used to take a lot of time on XP.

  Similar to XP, you should limit the number of Startup programs. Type msconfig in the

  Command in run or Start Menu search bar and click on the Startup tab disable the software, you do not

  need to load with Windows.

  Disabling the search index can save disk space and RAM, and while it can slow down the market a

  Search, research is still quite fast. You will find indexing and other options

  stuff of performance in Control Panel > performance Information and tools.

  Deny the right of the UAC can speed things up because it will stop to ask you if you want to do what you know you want to.

  Why it takes a long time to copy a disc to another, I don't know.

  Copies of Win7 although assuming anything else is it slows down, as an anti-virus program that is running constant checks in the background.

  Of course a lot of data yet take some time, but no more than XP. More fast more likely.

  A really cool addition is the jump list. You can lock the records commonly used for windows

  File Explorer in the bar of tasks, and when you R/click on the folder you get a quick access list.

  The great part of this is it to avoid using the libraries easier, but good! Maybe you bought

  Win7 as of the libraries.

  You will most likely find other "improvements" in Win7 you hate. I know that I have, but

  things in XP that were useful, but excluded by Win7 can be recovered via third party software.

  Just as was done with XP.

  Just be happy that you try Win8 vs Win7. Talk about bells and whistles...

• Refreshing the schema...

  Hi all
  
  I'm working on this pattern with expdp/impdb db v.11 modernization project.
  
  I've wasted enough time (1 day) to work on two or three questions, then finally decides to take the help of OTN users and see if we have the best and fast way to do it.
  
  Q:
  1. I want to generate a dynamic menu script to remove tables like '% 100% ', 'backup %', '%ABC%' from a schema of the user, but not able to find a way to do it... I can do manually generate the statement 1 drop for every table as option, but if 50 paintings is there, then too the manual works that I'm ignoring?
  
  2. how to use the EXCLUDE parameter in expdp para file to exclude tables as something like '100% ', 'backup %', '%ABC%': EXCLUDE = table: 'as "100% ',"backup %"," %ABC% "
  
  3 generate a dynamic script for deleting all user objects
  
  4. stop all users of db to access particular schema while importation is happening?
  
  5. to export in line is below parameter no?
  
  flashback_time = "to_timestamp (to_char (sysdate, 'yyyy-mm-dd hh24:mi:ss'),"yyyy-mm-dd hh24:mi:ss")" "
  
  
  Thanks in advance for looking into my problems.
  
  Q.4 passed under export to import
  Q.5 added

  Q:
  1. I want to generate a dynamic menu script to remove tables like '% 100% ', 'backup %', '%ABC%' from a schema of the user, but not able to find a way to do it... I can do manually generate the statement 1 drop for every table as option, but if 50 paintings is there, then too the manual works that I'm ignoring?

  A: select 'drop table' | owner: '. ' || table_name |';' from dba_tables where table_name like '100% ' and owner = 'owner '.
  Union of all the
  Select 'drop table' | owner: '. ' || table_name |';' from dba_tables where table_name like 'backup %' and owner = 'owner '.
  Union of all the
  Select 'drop table' | owner: '. ' || table_name |';' from dba_tables where table_name like 'ABC% %' and owner = 'owner '.

  Q:
  Best way to use the EXCLUDE parameter in expdp para file to exclude tables as something like '100% ', 'backup %', '%ABC%': EXCLUDE = table: 'as "100% ',"backup %"," %ABC% "

  A: Download the list of tables from database with as '100% ', 'save', '%ABC% '. Prepare parfile and in parameter exclude give the list of names of tables to aid in clause

  Q: generate a dynamic script for deleting all user objects

  a: select "drop" | object_type | ' '|| owner: '. ' || object_name | ";' from dba_objects where owner = 'SCHEMANAME."

  4. stop all users of db to access particular schema while importation is happening?

  A: open the database limit mode. or stop the listener if the listener listen also for this service (if there are multiple db to access the same listener and then not to do)

  5. Yes

• error when exporting datapump

  Hi gurus,
  
  Oracle Version: 10.2.0.3
  Operating system: Linux
  
  Today that we had a problem when exporting datapump runs in the production server, the error is
  

  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 9.126 GB
  Processing object type SCHEMA_EXPORT/USER
  Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
  Processing object type SCHEMA_EXPORT/ROLE_GRANT
  Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
  Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
  Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4869,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4868,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4867,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
  Processing object type SCHEMA_EXPORT/TABLE/TABLE
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
  Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
  Processing object type SCHEMA_EXPORT/TABLE/COMMENT
  Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
  Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
  Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
  Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
  Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
  Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
  Processing object type SCHEMA_EXPORT/VIEW/VIEW
  Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
  Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4869,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4868,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.grant_exp(4867,1,...) 
  ORA-06502: PL/SQL: numeric or value error: NULL index table key value
  ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 130
  ORA-06512: at line 1
  ORA-06512: at "SYS.DBMS_METADATA", line 5118
  . . exported "QFUNDAPAYPROD_JUN09"."ST_LO_TRANS"         213.3 MB 2017789 rows
  . . exported "QFUNDAPAYPROD_JUN09"."ST_EXTERNAL_LOG"     712.6 MB 14029747 rows
  . . exported "QFUNDAPAYPROD_JUN09"."ST_LO_MASTER"        198.1 MB  915035 rows
  . . exported "QFUNDAPAYPROD_JUN09"."ST_LO_APPORTIONS"    110.7 MB 3951926 rows

  Can someone help me please it is a serious problem and how to solve it.
  
  Thank you and best regards,
  Kahina Prasad.S

  SIDDABATHUNI wrote:
  Hi orawiss,

  Here is my order export

  expdp username/password directory=dbdump dumpfile=D_JUN09_$DT.dmp exclude=statistics,grants,PROCOBJ logfile=D_JUN09_$DT.log job_name=QFU
  

  But today morning alone i have added PROCOBJ prameter to exclude it.

  Thank you best regards &,.
  Kahina Prasad.S

  Bug 4358907, as the MOS ID: ORA-39127 use datapump exp [451987.1 ID]

  Try not to use the exclude option