Form loses color when I use Pathfinder > Exclude to cut a hole

Similar Questions

• The use of masks to cut a hole in a layer

  Can someone help me please.

  As soon as I thought that I had the idea of the use of masks to cut a hole in a picture of a book on Photoshop CS6 I tried my own exercise to see that I couldn't have my idea to work: -.

  (1) Firstly, I chose an image of clear blue sky as a background image.

  (2) second, I chose an image of a duck set amoungst it's own background.

  I proceeded as follows: -.

  (1) I open both images in Adobe bridge.

  (2) then, I made a selection of the duck using the Selection fast and saves the selection as a selection tool.

  (3) I renamed the layer of duck, just duck.

  (4) then, I opened the picture of the blue sky and named the sky of the layer.

  (5) then I went to windows, arrange, 2 vertical space to get two images on the screen.

  (6) using the move tool and I spend clicking to align the image of duck in the center of the image of the sky.

  (7) next I layer sky move towards the top of the layers stack.

  (8) then I loaded my selection of the duck.

  (9) next I clicked on add a layer at the bottom of the Panel.

  (10) I then painted with a black brush to reveal the duck under sky.

  Everything seems to work well, but rather than get a picture showing just theduct across the sky, it appeared that the selection has been

  no work and he selected the entire image with duck and its background.

  Can you plase advice why and how can I fix my proceadure to get the correct result?

  I have one of my exercises of the trial correct or I am just barking the wrong tree and missunderstood how masks!

  Any help would be most appreciated.

  Concerning

  Mark

  You have a lot of steps here: some useless, some confused. I suggest you just starting from scratch.

  Bring up the image of the sky. Evoke the image of a duck and drag on the image of the sky as shown below.

  Select the duck and with the mobile dotted lines showing, click on the symbol of the mask at the bottom of the layers panel.

  Finish

  

• My HP psc 1110 does not print colors when I use the shortcut keyboard F12 key to print. considering that it is p

  I just bought printer HP psc 1110 and despite I loaded the print from the HP website driver and together it up correctly, it has new ink cartridges, it does not print color to color text pages when I use the the keyboard F12 shortcut key to show.  I have the microsoft intelli wireless keyboard.  Although that it prints very well in color while I use the method of dialogue of the system either by pressing "Ctrl + Shift + P" keys together.   I have another canon printer canon pixma 1500 a former model, even this canon allows to print in color using one of the methods above to print.  I'm curious to know why HP is behaving as it is with me.  Can someone knowledgeable enough to enlighten us on this issue and help me on this problem, please.  I would be grateful if someone can send me a response.

  My email is: {deleted personal information}

  Naseer Malik

  Hi Ngoyi-Malik,

  OK, when you right click and select print work properly?

  If you come to open a different document in your Word and press Crtl P it prints correctly?

  The question seems that it is related to the program that you use for your missions. You may need to continue to press the Maj LTRC P in order to get the color to print from this application program. Let me know if the Word printing works well?

• How to change color when you use gradient tool?

  Yestoday I started and I can't get the color has changed.

  Whenever I use any tool, the color is always an a shade of gray gray, even when the use of the band his gray...

  Help, please!

  P.S Total noob to photoshop XD

  As far as I know that you should have no problem using the gradient in a color Mode:

  

• circle continues to change color when I use the type on the path tool

  I made two circles and I want to have written them, where is the black. but when I click and use the type on a path tool, it transforms the inner circle in black. I want the Red inner circle to stay, while the outer circle remains black. I had problems with this. I tried to adjust the background/outline, but nothing seems to work. Help, please.

  Here are two images - the first is what it looks like at first, while the second is what happens when I use the type on the paths tool:

  

  

  The use of this circle of text on a path makes a text path, which may not have a fill. Add a third circle and use it for the path of your text.

• HP 4500 Envy: Just installed my hp envy 4500, it won't scan in color when you use the pdf document.

  I just installed my hp envy 4500 with software updated and everything. When I scanned a page of letter United States using Documents with text preset (through the control panel of the printer or my mac using Hp scanning application) it comes out only in black and white. The only color work is if I use the 'General purpose' preset, but the resulting dimensions of the scan above the 8.5 x 11 format.

  Ive tried to see if I can change a mode in the settings of scanning... I saw this earlier post to troubleshoot: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Envy-4500-won-t-scan-pdf-in-color/td-p/3970...

  but these instructions correspond to my HP utitliy application since there is no 'blue triangle' or drop-down menu next to the Mode of my Scanner... as well as an option to choose the color.

  Help would be greatly appreciated!

  Hi @jnicolem

  From your description, it seems that you need to change your scan tasks. You can change the scan tasks by following the steps below.

  Follow the instructions below.

  • HP utility open from the dock.

• lose color when RAW conversion

  I have a Canon SX50 and tried the RAW feature yesterday. I am very impressed by the detail and color displayed on the overview screen. However, when I convert JPG images, color isn't the case about right. I could make a good black and white photo with my photo program (Photoscape), but nothing else.  PhotoScape is a RAW easy to use to JPG Converter. I used that as well as a converter free online called Imverter. The results obtained with the two converters were the same: lack of part of the original color. Can someone help me with this?

  Hey, Bobn.
  I watched Photoscape and it seems to have a tab/page "editor" which includes a large part of what you need to punch to the top of your image before RAW you convert to JPEG for printing or display. Seek to increase the contrast and color mainly and brightness as needed. Also a very little bit of sharpening will also help you.
  I think you would do well to lift your DPP and possibly ongoing enforcement, but I think the Photoscape can work too. Look in Google video tutorials for free how-to on Photoscape. I checked and there are several.

  Good luck

• Changes color when I use the new export or re-export fast in 2015

  Hi, I just upgraded to Photoshop, 2015.  I noticed, that they put the "Save for Web" command as a feature of the legacy, so I tried the new export and re-export fast, but my images accompanying through radically altered color.  (I'm saving to jpg, maximum).  Some examples of what I mean.  However, if I use the legacy, save for the Web or save slot, the color is fine.  Anyone know what is happening with the new export feature?  Thank you.

  

  Wow. Just hours after my last answer, Adobe has released 2015.1 Photoshop, which includes an option convert to sRGB in the export as dialog box. So, if I'm right about the cause of this problem, just update to this new version and you can ignore my previous suggestions. All you have to do in Photoshop 2015.1 is to select the new option convert to sRGB and colors must be consistent when exporting.

  

• Delete form fill color when printing the XI player

  So I can't go to print something to the work of our desktop computer. I'm trying to print a PDF Online that I have saved on the drive XI and then filled. When I print the PDF once the form is filled, the fields that are blue on silkscreening filled gray, with black typing, as our printer is black and white. The form is hard to read like this in hand, and told us that it is completely unreadable when fax. We have fill in pen in black ink, but obviously, it would be easier to just be able to type it.

  Is it possible to place or remove the form fill box? I've looked around on several sites and have not found a solution.

  Here is the site of the PDF for reference.

  http://www.courts.State.Va.us/forms/district/dc4044.PDF

  Thanks in advance!

  You must inform the authors of the shape of this problem and ask them to change...

  In the meantime, you can use this version, I have edited for you: dc4044_edited.pdf - Google Drive

• Form loses data when sent by email to PC

  I'm on Mac OS 10.6.2. I received an accessible PDF file writable by a colleague using a PC. I filled in the blanks and saved the file. If I open the file on the Mac, I see the data that I entered. But when I send the file to a colleague, she reports that the data fields are empty. I tried Mac Mail and Gmail-times failed.

  It's my first experience with PDF available in writing so I'm stumped. Any suggestions would be welcome.

  PjonesCET wrote:

  So that the information will be displayed to the person of PC need to go to Advanced menu and choose features extend into Reader

  This will allow you to complete save and send back to the PC person.

  It depends on whether or not the person filling out the form (the original poster) has Acrobat. If they have filed out and saved, it should appear at the end of PC users.

  UNLESS you used Mac Preview to fill out and save the form. He can't then present.

  If you only drive then Yes, the person who created the file would enable special features so that you save the file after filling in the drive. But if you use a drive and they had not been activated, you would have had a warning.

• Why did I lose connection when I use my phone?

  I have a Netgear wireless router. I use Talk talk. He has worked without problem until recently. If I'm online and make a phone call or someone phones at the same time I lose the connection. nothing changed so I don't understand why this is happening now. Can anyone help please?

  Hi Lynn,

  It could be the phone splitter that could be faulty. In addition, you can check if you can contact your ISP Internet Service (ISP) for assistance.

  See also:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• How to change the menu colors when you use the menu widget?

  So I inserted a menu using the menu widget, but how can I change the background colors? at this time is grey

  To change the background color of the item of a menu, simply select the Menu item (by clicking on the Menu twice) and change the color using the options of filling for the different States. If you change selection set in the options list, the color would be changed for all menu items.

  Thank you

  Vinayak

• How can I get rid of the background color when you use the list box?

  And, I lost my toolbar at the top of my screen in Acrobat and cannot find a way to get it back! Help!

  F8 to toggle the toolbar and you can not change the highlight color of a list box.

• How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of chan

  How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.

  Three things I can think of:

  Your document must be in RGB mode.

  Layer blending mode should be set to Normal

  Masks are grayscale. If you select the mask, you cannot apply a color.

  Always check your tab at the top to see if what you choose is RGB or grayscale.

  Gene

• When checkboxing 'Use as Button' - how to change the color of overview?

  Smart form with the text: when checkboxing 'Use as Button' - how to change the color of overview?

  In the button shape properties panel, you will find a 'Normal' field, if you open the drop-down list you see the other two States, select and change the Fill/Color/Character...whatever you want.

  

  If you want to use the States for this button several times, I recommend to save the style or to create styles in the object Style Manager where you can also modify built-in three States: Normal, rollover and down.