Use Touch ID instead of passwords

Similar Questions

• Why my access code is necessary now to use Touch ID?

  On my iPhone 5s I don't use Touch Id because he had trouble reading my footprint by more than 50% of the time. I just upgraded to the 6s more and now I turned on Touch Id and saved my fingers. However, whenever I want to use fingerprint to unlock the phone or in the App Store, wonder enter my password "Password must be entered to activate Touch ID". What? Is not the ID of any point of contact to use your fingerprint instead of typing a number?  How can I change this? I don't see anything obvious in the ID Touch settings.

  Thank you

  Did you check the settings of iTunes and AppStore in settings/TouchID & Code and make sure that iTunes AppStore is on &. If you go into settings/iTunes AppStore, you will see the confirmation, that Touch ID is selected for your purchases, well under the Apple ID.

  Unlock the screen must also be enabled in the settings/TouchID.

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by doing this, but it can cure a few glitches.

• my wifi password has been changed and now I want to get back in touch with the new password HOW

  my wifi password has been changed and now I want to get back in touch with the new password HOW

  Hey gerritfrompretoria,

  If you are not prompted to use the new password to your Wi - Fi network when trying to connect, you may have to remove the network on your system. This can be done by the following steps.

  1. Open system preferences in the Apple menu
  2. Choose the network
  3. Select a Wi - Fi connection on the left
  4. Click Advanced... in the bottom right
  5. Choose your network from the list of preferred networks
  6. Click on the '-' at the bottom of the list
  7. Click OK
  8. Click on apply

  Once removed try to connect to your Wi - Fi network normally and you will be prompted for the password.

  Sincerely

• Thunderbird no longer win 10 when I used Windows Defender instead of AVG (if Thunderbird not dangerously ruled Defender analyses) - what is the solution?

  Thunderbird has stopped working win 10 when I used Windows Defender instead of AVG - free

  The event log to win 10 had many "ERROR!" Application Hang. "entries, all this said:
  The version of the program 38.3.0.5749 thunderbird.exe ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the pants of control of security and maintenance
  Process ID: 1acc
  Start time: 01 d102e33137ce7e
  Log name: Application
  Source: Application Hang connected: 10/10/2015 00:45:36
  Event ID: 1002 task category: (101)
  Level: Error keywords: Classic
  User: N/a computer VidAce
  OpCode:

  Things returned to normal when I excluded thunderbird. EXE from analysis of sdefender of window operations. But it's dangerous for security. How to fix this please?
  Thank you.

  Thunderbird is compatible with Windows 10. Defender problems are exactly that. Something that Microsoft needs to fix.

  Regarding a malicious attachments go. What of them?

  Before they can do any harm, they must be transformed into a binary file in the text, they are converted to attach them to the message and then be written in the Temp folder so they can be passed to the operating system with an application for opening of their. An antivirus program that cannot detect the payload of a newly written file and keep it opens is not worth the CPU cycles which is uses for to fail in its primary function. Defender claims to do this. If it isn't, still an issue for Microsoft. Now Thunderbird...

• I like to use my speakers instead of always put in my ear. How to turn the volume of the speaker on the iPhone OS?

  I have an iPhone SE I would use the speaker instead of always put the phone to my ear, but the volume is not good at all on the speaker. Is there a way to increase the volume for the speaker?

  You would turn the volume for the speaker during a call speaker. The volume buttons control different aspects of the volume, such as the ringing, the music, the volume of the speaker during a call. You change certain volumes based on what you happen to be in time. When you first unlock the phone and are simply looking at the home screen, if you press the volume buttons then, you set the ring volume. Change the speaker volume when in a call of the speaker, is that in the call itself, just like changing the volume of the earpiece, that while in the call.

• Unable to use touch id

  Impossible to use Touch ID

  See "Get Help with Touch ID:

  Use the ID Touch on iPhone and iPad - Apple Support

• Apple TV (4th Gen) ~ try to use Siri and instead of answers, it scrolls the suggestions of things I could say.  What happens and how can I cope?

  Apple TV (4th Gen) ~ try to use Siri and instead of answers, it scrolls the suggestions of things I could say.

  What happens and how can I cope?

  Have you actually enabled Siri in settings > general > Siri, or are you just using the Siri button on the remote control?

• ATTENTION: nsIJSON.decode is obsolete. Use JSON.parse instead.

  ATTENTION: nsIJSON.decode is obsolete. Use JSON.parse instead. Symptom. WHN I open a new tab, the creen goes on with my screens recorded, but none of them will load.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• With Macs DO NOT use symbols in your wifi passwords!

  It's more of a discussion of assistance than a question. I was recently informed by a wifi from my internet provider technician not to use symbols in my wifi passwords where I connected my Mac products. He said, in his experience, that's never a good idea. Apple seems to have problems with the symbols.

  Feel free to weigh in with your experience. But I think he was right. My Mac, ipads and phones, including my Apple TV still fell the signal in my house and a condo I have elsewhere (different internet service providers). I had everything checked lines, computers even buy a new modem and all I had to do was change the darn passwords for those with symbols. Head a slap!

  Now, I feel is no longer the problem. Amazing little trick that everyone should know!

  What do you mean by symbols?

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?

  Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

• Password reset: I'm using vista I forgot the password to the file encreption and I do not know the supervisor password

  I'm using vista I forgot the password to the file encreption and I do not know the supervisor password. Thanks for the help

  I'm using vista I forgot the password to the file encreption and I do not know the supervisor password. Thanks for the help

  Can't do anything without your password 'supervisor '. Go talk to this person.

  We are not allowed to help users to bypass the administrator password protection. Penalty should be banned from all the Microsoft forums.

  t-4-2

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.