Why my access code is necessary now to use Touch ID?

Similar Questions

• iPhone 6 s most will not recognize my access code and has now disabled the phone.

  Helllo, I just got a new iPhone 6s over yesterday. I set up the fine and added my footprint and the password following the instructions. I've also updated the operating system most recent.  Today while out, he kept asking me to put in my password every time I used the phone. I went to try and see if I could lesson the number of times he was asking me this.  He asked for my password, I put in and clicked off the coast I wanted a password used.  Since then he continues to claim my access code again, but will not accept!  He has now disabled the phone that I can't at all.  Can someone please?  I don't want to delete the photos that I took today.  Thank you.

  Since your password does not work, you will need to restore as new.

  You have forgotten or wrong password

  http://support.Apple.com/en-us/HT1212

• Why my access code does not have the activation code for activation of the CS6?

  I installed CS6 on a stand-alone computer.  I went through the process of activating offline, but the access code that was generated will not produce an activation code.  I tried several times and even tried another after 7 days without success.  When I enter the code and serial number, he told me that the two are not valid.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• My access code for CS3 cannot be used as my laptop is inaccessible

  Dear Sir.

  my old laptop was damaged by water and I cannot take off a my regustration number I now have a new laptop and want to run CS3 on it. I tried to use your "chat" online, but they said they could not help and said I have to put my problem here.

  Please help me.

  Please, do not post your serial number here as anyone would be able to use it in this case. I can't reset the activations, if you've used both, but the link I posted above, you should get to right-wingers for assistance.

  You can also check the help below documents if the system complains that your serial number is not valid:

  Error "serial number is not valid for this product". Creative Suite

  Invalid serial number error

  Guinot

• What is the difference between the password and access code

  I get all the IDs and passwords and none are accepted

  "I received message' iPad requires your password after restart", but it does not accept passwords

  What is the difference between the password and access code

  Standard codes which block the iPad are 4 or 6-digit. You can set a more difficult to decode, personalized access code / password in the settings using letter and numbers if you wish.

  A password is a series of numbers, symbols and letters that a user putting in place to protect the information in a frame, a web site, e-mail, etc. This may actually be a word or series of words, if you wanted to set up in this way.

  Your iPad is looking for this 4- or 6-digit code. If you can remember, you must restore the device so for free.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Why apple IOS 9.3.2 requires an access code 4 digit instead of the previous 6-digit

  Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

  < published by host >

  mweedn wrote:

  Today, 01/08/16, my 5s required an update of the access code and only 4 digits, instead of the 6 previous numbers. Why?

  < published by host >

  You can always use the four or six-digit access code.

  You can change it when you go into the settings of password.

• Access code did not work, now iphone 6s is off the display to connect to itunes

  Access code did not work, now iphone 6s is disable showing connect it with itunes, futher when I connect with I phone I started to update and there is the mode of recovery after 15 min do not know what to do

  Restore is the only option here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I have down loaded the trial and now it is accessing an access code, but I've never had a

  I have down loaded the trial for acrobat pro XI but now he needs an access code, but I've never had a

  You must purchase a license in order to obtain the access code.  The trial will last only for 30 days (or less).

• What should I do? Sells iPad factory, new owner says reset access code is defined?

  Hello world

  I sold an iPad 2 on Ebay (Jan 10) last month and it shipped overnight to get 12. The iPad was released factory suiteApple 'what to do before you sell or give away your iPhone, iPad or iPod touch' instructions. The iPad has been previously bought nine of the store and has never been sold or whatever it is. The Ebay buyer was an account with zero return.

  February 17 (38 days later) the new owner sent me by saying that the iPad had a password on it. He claims that it is still in the initial Setup screen, quote "after the Hello message in 4 languages, a window pops up that says...". Enter code iPad requires your password after restart. »

  
  

  Note that the iPad is not locked to one Apple ID (I checked the iCloud account and it's certainly not there). The error is only to ask the password - but the iPad was factory reset and installation has not been completed, which means that there should not be an access code. (I would like to focus on the resolution of the problem, but as far as I can see, there are two possibilities - someone went to halfway in the process configuration and set a password, or leave the iPad in Setup for more than one month has caused something to go wrong).

  I searched and found this relevant issue: "I got locked out from my mini iPad during installation, keep me for password but I did not stay in a place" the solution he had to erase the device with the recovery mode. I sent this link to the buyer. It is a simple process that should only take a few minutes. He said he tried and it doesn't work. He won't say exactly where it breaks down or what error. I suggested he ask for help from someone who knows more about computers or it takes the iPad at the Apple store to reset them, but he says will not help Apple Store, the store nearest is 30 minutes and there is no time.

  He says now that he wants me to give him my credit card details so that it can charge my card for a messaging service pick up the iPad. The purchase price was 137,99 £ + £11 shipping. I've already paid the fees of £14,89. He seems to expect a full refund, including pay me again for return shipping and pay me Ebay fees will not be refunded. Of course, in this scenario, I end up losing a little money.

  So, questions:

  • An Apple store will erase the iPad? (I have been informed that they will be, but the buyer claims also. The Appleinstructions seem pretty clear that they have indeed will be, quote: "If you don't have a computer, borrow one from a friend, or to an Apple Store or service provider registered Apple.")
  • Given that he is out of the period of 30 days for returns of Ebay, is it possible to recover Ebay fees, if I accepted the return? I wouldn't mind him repay something just to get it, but it would be stupid to lose 1/3 of the value of the tax sale and delivery.
  • What can I do else? I really want to solve this problem, but my options are limited, when it cannot reset the password itself, is not going to the Apple store for the help and feedback from Ebay date limit is passed.

  Thanks for all the advice and sorry for the long post (just wanted to just include all the details). I'll share this discussion with the buyer, and he is free to comment if he wishes.

  Looks like you provided the buyer with all the advice we would give here. If they are unable to follow the instructions to clear the password lock screen and are 'too busy' to consider at the Apple Store to get help, I don't really see how you are responsible for this. Why he has waited more than a month to put in place even though they knew they had a day 30 back window? Why is he not come on why the instructions that you send it to get the matter resolved "does not work"? This kind of problem is solved per day on this site. But when someone tells us that they "can't" do something and will not provide exactly the problem they face, we cannot do anything more for them.

  So, from the point of view troubleshooting, the buyer has the opportunity to provide you with more information, so you can help, or take the time to go to the Apple Store to get help. If the device is not locked activation, which it wouldn't since you followed the instructions on what to do before you sell it, then the question is operator error. There is nothing wrong with the device. The only question is to reset and do put in place.

  I don't see how we can all do more for someone who is not willing to work with you, or who's not ready get a form to help someone who understands what they are doing (because it is clearly not).

  Good luck

  GB

• Why is-C code so much faster? (Image processing)

  Hello!

  I'm working on a larger application but I reduced to show you a problem I encounter at the beginning. I join all the files needed to run.

  It is simple rgb2monochrome that I implemented in C code algorithm and code LabVIEW. I have not now why the C code is 4 times faster.

  In the code C transfer tables with pointers so I'm working on a given memory area. I thought that LabVIEW can be slower, because it creates unnecessary copies of berries. I tried to solve this problem with Structure elements instead and value reference data but no effect.

  I also tried to change the tunnels in the shift registers in some places (read in optimizing LabVIEW Embedded Applications). I changed options in the execution of the subVIs properties and I created EXE application to see if it will be faster. Unfortunately I can not yet reduce the difference time of execution.

  I know that my algorithm can be better optimized, but this isn't the main problem. Now the two algorithm are implemented in the same way (you can check in cpp file) when it should have a similar execution times. I think I made a mistake in the LabVIEW code, maybe something with memory management?

  And I know more... Maybe nothing wrong with LabVIEW code but something too good in C code ? It is 64 b library, implementation of usual way without forcing the parallelism. Moreover I brand performance in the thread of UI in COLD LAKE. But perhaps nevertheless CPU manages this function with multi hearts? I have 4 cores then the difference in execution time would be good . But it's impossible, right?

  I know that the notice that LabVIEW is sometimes slow, but approximately 15%, not 4 times. So I had to make a mistake... Anyone know what kind of ?

  Kind regards
  ksiadz13

  Well, here are a few things that make faster LabVIEW code, there are other improvements that could be made, but I would need to do several tests to see if they are better based on your input data.  First of all, I would like to enforce the VI Inline, not subroutine.  Also, I'd work with arrays of data instead of scalar values.  Also, you know the number of rows and columns because it is the size of the array, why keep this information?  Oh and if you are working with curls you can try parallel for loops to work on more than one processor at a time.

  And also, I'm not sure that all this work is in any way necessary.  If you have a double and turn it into a U8, it will be 255 If the value was greater than that to start with.  Attached is an updated release with several possible options to try.

  

  Oh and another improvement, why are you even unbundling the data in Unbundle_imageCPU1.vi?  Why not work with this table 2D-Red Green Blue?  I realize that even VI is called in LabVIEW code options both C but with LabVIEW just deal with other data could make faster together.  In particular, in view of the fact that regroup you after you're done anyway.

• Since iOS 10.0.2 my phone is accessible without the access code

  Since iOS 10.0.2 my phone is accessible without the access code after I pressed the sleep button. Press the home key several times my phone opens. As a first step, it is that he fell asleep in itself not when I used the sleep button but now even after skeep button I can access my phone without the password.

  the rear power and apple support site are not easy to use to report the problem.

  Have you tried to set up your password again in the settings?

• Apple TV access codes

  Why AppleTV does not back to school already consulted programming access codes?  Is there a setting I'm missing that will allow continued access without returning to the network (food network, CBS, etc...) for re - check an access code before watching the station again?

  Normally, it is not, or at least should not, require re-entry, but occasionally either something wrong with ATV, or more commonly, the provider of satellite-to-cable makes a change.

• Look immediately request access code

  I just got a new watch and updated the software.  Now whenever I get my wrist, he asks me to put in my access code.  This was not the case with the other my watch.  Apple support says that it is now the norm.  Have others noticed the change?  I intend to stop using my access code and stop using Apple pay on my watch for this reason.

  Hello

  You may want to use these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on.

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• iPhone 4 has a scrambled screen. Can I enter remote access code?

  I gave my child my iPhone 4 when I upgraded. He had the newest iOS available for the 4, which I think was 7.1.2 or something close. before I gave it to her, I restored to factory settings and deleted all the files. She created a new password and it used for music and photos. She doesn't have it synced to a device or stored in iCloud. It worked perfectly when I gave it to her. A few days earlier, she dropped and now the screen is scrambled and bring up the screen to enter the access code. I plugged it to my MacBook to see if I could get behind the scramble but I just got a message that the photos cannot be downloaded without unlocking the device.

  - SO my question is, is it possible to enter this access code other than to type in the phone itself? Some behind the scenes where I can enter the code and go to the photos and music living in the unit? This phone has a removable SIM card.

  Grateful for any help you can give me.

  mactwisp wrote:

  - SO my question is, is it possible to enter this access code other than to type in the phone itself?

  No, it isn't.

  I hope that "photos and music living in the unit" were backed up when the iPhone was iTunes or iCloud.  If not, the only hope would be to take the iPhone to an Apple Store or Service Center authorized Apple and determine if it is fixable (very unlikely, in my opinion).  If it's fixable, great.  If this is not the case, the material on the iPhone is lost.  (Note bought from iTunes music can be re-downloaded iTunes on a computer or an iOS device different.)

  For later use, the iPhone should never be the main housing for music not bought in iTunes.  Also, of course, photos taken on an iPhone that are worth saving must be saved.