Used light aPs with WLC

Similar Questions

• With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

  With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

  Hello

  Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

  Also in preferences > Performance > "Use Graphics Processor" must be checked.

  

  ~ Assani

• I recently got an iphone unlocked 5. It used to be locked to T-Mobile. Can I use this unit with any service of cells now or only to others who use SIM cards?

  I recently got my old 5 s T-Mobile unlocked iPhone. Given that T-Mobile is a basic service of SIM, I wanted to see if now it is unlocked, if I can use the device with no - SIM services (i.e. Verizon) and SIM (T-Mobile, AT & T) services?

  KaylianVA wrote:

  I recently got my old 5 s T-Mobile unlocked iPhone. Given that T-Mobile is a basic service of SIM, I wanted to see if now it is unlocked, if I can use the device with no - SIM services (i.e. Verizon) and SIM (T-Mobile, AT & T) services?

  Verizon only lights up iPhone 6 / 6 + and 6s / 6 s + tmobile.

  Verizon phones (except for some other 3 G phones they sell) require a SIM card. Any 4 G LTE phone requires a SIM card.

• Autonomous aPs with several SSID in a VLAN?

  Hello

  We use autonomous APs to Cisco in our spirit of place several THAT SSID configured with WPA - PSK.

  Now, we want to add a different SSID using WPA - EAP authentication.

  Since many of our branches have flat architecture VLAN with only one VLAN, we would like to have two SSIDS in the same VLAN, in a subnet.

  This is supported in the autonomous APs?

  Kind regards

  Sinan

  It is possible, if it is not a standard way of configuration.

  Here's a solution if you willing to give it a try. If you have a dish vlan, you can configure your AP connected as access vlan switchport & configure your SSID two like that. It should work (I tested with Open Auth & you can try to add security as well). You may not be able to broadcast two SSIDS, but it's something you have to make compromises if you wish.

  CONFIG SWITCH PORT *.

  interface GigabitEthernet1/0/11

  Description of the AAP-1142

  switchport access vlan 143

  switchport mode access

  spanning tree portfast

  CONFIG OF AP *.

  A1140 hostname

  !

  dot11 ssid ARH

  open authentication

  !

  dot11 ssid MNR

  open authentication

  Comments-mode

  !

  interface Dot11Radio1

  SSID ARH

  SSID MNR

  root of station-role

  Bridge-Group 1

  no downtime

  !

  interface GigabitEthernet0

  Bridge-Group 1

  !

  interface BVI1

  DHCP IP address

  !

  Once you do this you can associate the client with different SSID, but all get flat IP of the same vlan (143 in my example)

  A1140 #show dot11 associations

  802.11 client Stations on Dot11Radio1:

  SSID [ARH]:

  MAC address IP Device Name Parent State

  a088.b435.c2f0 192.168.143.63 ccx-customer A1140 self Assoc

  SSID [MNR]:

  MAC address IP Device Name Parent State

  04f7.e4ea.5b66 192.168.143.64 unknown - homes Assoc

  A1140 #sh worm

  Cisco IOS software, software of C1140 (C1140-K9W7-M), Version 12.4 (25 d) JA, RELEASE SOFTWARE (fc1)

  HTH

  Rasika

  Pls note all useful responses *.

• ACS RADIUS timeout with WLC 7.0 5.0

  Hi guys,.

  I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.

  • These devices have open communication on all ports - no firewall or ACL
  • they have successful ping communication

  The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.

  • Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
    • This works and the WLC gets answer my fortune Server RADIUS
  • Using a simple windows EAP client to query the ACS using the RADIUS protocol
    • This works and the FAC processes the RADIUS request and sends a response
  • Placed a customer wireshark on the network to inspect the time-out.
    • Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package

  At the moment I have the

  1. WLC accepting wireless client association and
  2. sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
  3. the WLC receives no answer and generates a timeout message and separates the client.
     1. Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.

  In summary the WLC and GBA properly operate independently, but they do not communicate via radius.

  Any help appreciated thanks

  It seems that you use ACS 5.0 without tasks.

  For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released

  I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0

  I'm not sure of the specific CDETS but can be:

  CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect

  ACS 5.0 has a rollup with all the patches being accumulated approach

  My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8

  Patch can be downloaded from CEC

  To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:

  # acs patch installs repository

• When a photo has for example a bright sky beside the dark object, using lights and shadows can cause a 'halo' or double edge to appear. How can I avoid this?

  When a photo for example has a bright sky next to the dark object, using lights and shadows to reduce high contrast can cause a 'halo' or double-edge to appear. How can I avoid this?

  From my experience, this isn't a problem that has a simple solution, such as moving a slider or a combination of the sliders in LR. It requires rather a major change in the technique, at the unit or in office. Some pros (I am not one) tire ALWAYS support HDR or this reason - better transition from highlights to shadows, then tweak the image with much less "heavy" necessary. Another popular technique is the luminosity masking and blending in PS. There is a ton of information on this topic (just do a search on Youtube), but it's not easy to learn or do, but it can eliminate this problem.

• Can I upgrade to iOS 10 using a Mac with OS (10.8.5) Mountain Lion?

  Can someone tell me if I can sync to my iPhone 6 with iTunes using a Mac with the (10.8.5) Mountain Lion?

  This is what Apple is the list for the iPhone 7 that runs iOS 10.

  http://www.Apple.com/iPhone-7/specs/

  • Sync with iTunes on a Mac or a PC requires:
    • Mac: OS X v10.9 or later
    • PC: Windows 7 or later
    • iTunes 12.5 or later (free download from www.itunes.com/download)

  My daughter is running Lion on his MacBook Pro and was synchronize its iOS iOS 9.3.5 devices. The requirements for iOS 9 call for Cougar 10.8.5. It will never update via iTunes - always on WiFi - and I think that's how she got away with it. I don't know if it will work this time with iOS 10.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• I use an iMac with a wrong as a monitor graphics card?

  The graphics card on my iMac went wrong.  The logic board is OK and works otherwise OK.  Can I use the iMac with the graphics card bad as a second monitor in target disk Mode or use it as a monitor for a mac mini? The bad iMac is a model 2011 (of course!) with HDMI ports and Thunderbolt.

  I think you mean that the Display Mode target and any connection to the screen will have to pass by the graphics card. Whereas if you replace the bad graphics card, don't.

• Using Migration Assistant with no display

  I got my MacBook mid-2010 (2.4 GHz, 4 GB RAM, OS X El Capitan) for 2 years.

  It splits into two somewhere within 2 years.

  The MacBook was still usable, but it had to be on a desk. The screen was completely separate from the base. It still worked.

  I woke up a few days ago to find that someone had cut the display cable holding the MacBook set and turn on the screen.

  I bought an early-2011 13 "MacBook Pro to replace the dead MacBook. (Yes, I buy old Mac because the news is so expensive).

  Old Mac has been saved semi regularly, so I have an old backup to use for the new Mac. The problem is that just before the death of the former Mac, I downloaded a bunch of stuff that has not been saved. I really want the files that have not been backed up on my new MBP.

  Can I use Migration Wizard with an Ethernet cable and transfer of data from one, or Migration Assistant must be running on old Mac as well?

  I tried to connect (I'm sure that the computer is still running, it doesn't simply have a display) on the old Mac, plug the backup drive and I hope to do a backup hourly, but Time Machine did not only.

  Any suggestions would be GREATLY appreciated.

  If you use Ethernet or a wireless network to transfer data, Yes. If you can not download the files and file-sharing has not been activated on the old Mac, you must either get fixed display or put its internal drive in a closed Chamber.

  (143074)

• How to use spell checking with magic mouse

  How to use spell checking with magic mouse

  Hello

  The mouse is not intended to be used with the spell checker.

  The mouse settings available in system preferences > mouse

  Spelling and grammar can be checked in the Edit menu in most applications.

  In addition, shortcuts keyboard.

  Command:

  And the command;

• Can I still use Internet Explorer with Mozilla Firefox

  Can I keep the two search engines installed and use them without causing any problems to my computer

  _{Change by a moderator. I changed the title of
  can I still use exporer with mozilla for
  Can I still use orerlExp Internet with Mozilla Firefox}
  

  They are not search engines. They are called browsers, and Yes you can use Mozilla Firefox and Internet Explorer on the same computer at the same time. You can also add Google Chrome and a few others without causing problems for your computer.

  Most people are after the use of these alternative browsers, that they no longer wish to continue using Internet Explorer.

• How to make a bootable USB using the disc with El Capitan utilities?

  Anyone know how to make a bootable USB key using the disc with El Capitan utilities?

  Try this its worked perfectly.

  http://www.Macworld.com/article/2981585/operating-systems/how-to-make-a-bootable - os-x-10-11-el-capitan-installer-drive.h...

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Rotation of the photos in iPhoto I could simply use the trackpad with 2 fingers turning motion.  In pictures, it seems that I have to use the Edit menu, etc etc?

  In iPhoto, I could simply use the trackpad with 2 fingers rotating motion to change photos quickly to stand.  In the Photos but it seems I have to use the Edit menu, etc. etc.?

  command + r or command + option + r, depending on the direction you want.

  Also, right-click on the image to the same command, hold the option for the choice