Used los datos del Performance performance

Similar Questions

• What is the fastest processor I can use in my Dell XPS 400 motherboard DXP051

  I currently have the Intel Pentium D 2.8 Ghz processor supplied with my computer in 2005. I bought an Intel Pentium D 3.4 Ghz (see info below) on ebay but I got an error message when I started my computer saying "incompatible processor detected. Is there something I can do to fix this? If not, what is the fastest processor that is compatible with this motherboard? And why is it so hard to find lists of compatibility?

  Info on new processor:

  INTEL ' 05

  PENTIUM D

  945 SL9QB COSTA RICA

  3.40GHZ/4M/800/05A

  3631 HAS 184

  Not because the VRM on the motherboard not supported to 130w processors.

  

  Processor Intel® Pentium® D with
  Dual Core technology up to 820 CPU faster stop with unsupported processor Message.
  (2.8 GHz, 2 x 1 MB, 800 MHz FSB)
     
  Processor Intel® Pentium® 4 with up to 650 faster CPU will stop with unsupported processor Message.
  Hyper-Threading technology
  (3.4 GHz, 2 M, 800 MHz FSB)
     
  Intel® Celeron® D up to 351 faster CPU will stop with unsupported processor Message.
  (3.2 GHz, 256 K, 533 MHz FSB)

  Unsupported parts can be associated with 130W TDP.

  The list of all has been tested in a GX 620 Mini lathe with power 305 w, Bios A11 and the

  DELL Performance radiator J9761 (Version Heatpipe copper)

  The Optiplex 620 TOUR WITH BIOS A11 works with all processors listed.

  Processor Intel® Pentium® D 960
  (Cache 4 MB, 3.60 GHz, 800 MHz FSB) 130 W
  Processor Intel® Pentium® D 950
  (Cache 4 MB, 3.40 GHz, 800 MHz FSB) 130 W
  Processor Intel® Pentium® D 945
  (Cache 4 MB, 3.40 GHz, 800 MHz FSB) 095 W
  Processor Intel® Pentium® D 940
  (4 M Cache, 3.20 GHz, 800 MHz FSB) 130 W
  Processor Intel® Pentium® D 935
  (4 M Cache, 3.20 GHz, 800 MHz FSB) 095 W
  Processor Intel® Pentium® D 930
  (Cache 4 MB, 3.00 GHz, 800 MHz FSB) 095 W
  Processor Intel® Pentium® D 925
  (Cache 4 MB, 3.00 GHz, 800 MHz FSB) 095 W
  Processor Intel® Pentium® D 920
  (4 M Cache, 2.80 GHz, 800 MHz FSB) 095 W
  Processor Intel® Pentium® D 915
  (4 M Cache, 2.80 GHz, 800 MHz FSB) 095 W

  ****************************************************

  Select the processor Intel® Pentium® D 840
  (Cache 2 MB, 3.20 GHz, 800 MHz FSB) 130 W
  Select the Intel® Pentium® D 830 processor
  (Cache 2 MB, 3.00 GHz, 800 MHz FSB) 130 W
  Select the Intel® Pentium® D 820 processor
  (Cache 2 MB, 2.80 GHz, 800 MHz FSB) 095 W
  Select the Intel® Pentium® D 805 processor
  (Cache 2 MB, frequency of 2.66 GHz, 533 MHz FSB) 095 W

• Do not I already buy imagenes con tarjeta are al fill todos los datos cuando llego al pais toma me por estadounidense.y in mi perfil tengo los datos well.

  Not me already buy imagenes con tarjeta ago that fill todos los datos cuando llego al has the pais casilla not me already poner España y ciudad.¿como I can change the config cuando mi ID esta correcto?.

  The country associated with your Adobe ID is in the United States.  Please use the following workaround to change the country:

  Change the country associated with your Adobe ID

  Thank you

  Bev

• METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

  METI los datos mi tarjeta, compre ilustrator CC pero no puedo instalar no as soon as not compatible operating system, the hago como para instalar

  Please refer to the system requirements | Illustrator for operating system support.

  You can install CC 2014.

  Please use the following steps.

  1. Download creative Cloud desktop application from the link Download Adobe Creative Cloud apps | CC free trial Adobe
  2. Sign in using your Adobe ID and password.
  3. Go to the applications Panel and install the CC 2014 of the required application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Hola buenos dias quiero una compra realize con tarjeta credito pero el banco me pide los datos cuenta bancaria donde llegara the like live following me puedes cooperate con ese dato gracias

  Hola buenos dias quiero una compra realize con tarjeta credito pero el banco me pide los datos cuenta bancaria donde llegara the like live following me puedes cooperate con ese dato gracias

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• The pen Surface Pro can be used with a Dell computer, or does it take a specific Terminal?

  The pen Surface Pro can be used with a Dell computer, or does it take a specific Terminal?

  Hi Luzs,

  Could you please let me know if you want to use from the pen of Surface Pro with Adobe Applications for editing?

  Dell computer is also a touch screen computer you have?

  Kind regards

  Tanuj

• How to use the API to perform a "Power on and Force Recustomization" 1.5?

  With the help of VMWare vCloud Director, when the virtual machine is turned off, I have the menu ' power on and Force Recustomization "to turn on the machine and do some recustomization work such that reset the administrator password.

  However, I can't do this using the API. The vm/vapp. PowerOn() has no parameters. The vm/vapp. Deploy (true, 0, true) can (re) deploy the vm/vapp and plugged. But the recustomization never runs.

  My code can update the section "customization of the OS invited." I can see it in vCloud Director. And then if I manually ' power on and Force Recustomization ", the machine will be powered on to reset the password. But if I use the above codes, none of them works. So, I conclude that the problem occurs in the sending of the statement of "Power on and Force Recustomization ' using the API.

  Any help will be evaluated.

  Ref:

  http://communities.VMware.com/message/1691773

  http://communities.VMware.com/message/1837194

  http://communities.VMware.com/message/1805142

  http://communities.VMware.com/message/1844513

  Hello

  To perform the PowerOn + ForceCustomization option in the UI by using the API.

  Perform the same operation of the virtual machine deployment.

  Ex: POST - api/vApp/vm-uuid/action/deployment

  XML MESSAGE

                        http://www.VMware.com/vCloud/versions"xmlns:ns6 ="http://www.vmware.com/vcloud/v1.5"powerOn ="true"forceCustomization ="true"deploymentLeaseSeconds ="10000"/ >"

  Using Java SDK - use of the virtual machine-> deploy();

  Make sure that the customization of the comments is enabled on the virtual computer.

  Make sure that the deployment - forceCustomization and powerOn settings are set to true;

  Kind regards

  Rajesh Kamal.

• Using APEX_ITEM in SQL performance issues?

  Hello
  
  I was wondering if using APEX_ITEM.* in your SQL source for a report would give some performance issues? I expect the report to bring a little more than 3000 documents. When I developed it it was working fine but we had 150 cases or so, but now we have migrated demand during our test the page system will take about 2 minutes to load. Here is my SQL to create the report:
  
  Select distinct
  initcap (MPa.pa_name) | ' (' || sd. DESIGNATION_CODE | ')' site.
  FRC. REPORT_DESCRIPTION report_category,
  MF. Function FEATURE_DESC
  decode (cmf. SELECTED_FOR_QA, 'Y', 'X', ' N ',' ') QA,.
  () apex_item.select_list_from_query
  21,
  CPF. ASSIGN_TO,
  «Select ss.firstname | "» '' || SS. Surname d, ss. STAFF_NUMBER r
  of snh_staff ss,.
  snh_management_units smu,
  m_pa_snh_area psa
  where ss. MU_UNIT_ID = EMS. UNIT_ID
  and smu. UNIT_ID = psa. UNIT_ID
  and ss. CURRENTLY_EMPLOYED = "Y"
  and psa. SCM_LEAD = "Y"
  and psa. MAIN_AREA = "P"
  and psa.PA_CODE = ' | MPa.pa_code,
  NULL,
  '' YES. ''
  NULL,
  (' ') assign_to,.
  () apex_item.select_list_from_query
  22,
  Decode (to_char (cpf.planned_fieldwork, ' DD/MM /'),)
  30/06 /', 'Q1 ' | TO_CHAR (planned_fieldwork, 'YYYY'),
  30/09 /', 'T2 ' | TO_CHAR (planned_fieldwork, 'YYYY'),
  31/12 /', 'Q3 | TO_CHAR (planned_fieldwork, 'YYYY'),
  31/03 /', 'T4 ' | TO_CHAR (planned_fieldwork-365, "YYYY").
  TO_CHAR (cpf.planned_fieldwork, "YYYY")),
  ' select r d,
  of CM_CYCLE_Q_YEARS') planned_fieldwork,.
  () apex_item.select_list_from_query
  23,
  Decode (to_char (cpf.planned_cmf, ' DD/MM /'),)
  30/06 /', 'Q1 ' | TO_CHAR (planned_cmf, 'YYYY'),
  30/09 /', 'T2 ' | TO_CHAR (planned_cmf, 'YYYY'),
  31/12 /', 'Q3 | TO_CHAR (planned_cmf, 'YYYY'),
  31/03 /', 'T4 ' | TO_CHAR (planned_cmf-365, "YYYY").
  TO_CHAR (cpf.planned_cmf, "YYYY")),
  ' select r d,
  of CM_CYCLE_Q_YEARS') planned_cmf,.
  () apex_item.select_list_from_query
  24,
  CPF.monitoring_method_id,
  "(Select METHOD, MONITORING_METHOD_ID from cm_monitoring_methods where active_flag ="Y"') monitoring_method,
  (apex_item). Text
  25,
  CPF.pre_cycle_comments,
  15,
  255,
  "title =" '. CPF.pre_cycle_comments |' » ',
  'annualPlanningComments '.
  || TO_CHAR (cpf. Comment PLAN_MON_FEATURE_ID)),
  (apex_item). Text
  26,
  TO_CHAR (cpf. CONTRACT_LET, 'MON-DD-YYYY'),
  11,
  (11) contract_let,
  (apex_item). Text
  27,
  TO_CHAR (cpf. CONTRACT_REPORT_PLANNED, 'MON-DD-YYYY'),
  11,
  (11) contract_report,
  (apex_item). Text
  28,
  CPF. ADVISOR_DATA_ENTRY,
  11,
  (11) advisor_entry,
  CMS.complete_percentage | ' ' || status of CMS. Description,
  (apex_item). Text
  29,
  TO_CHAR (cpf. RESULT_SENT_TO_OO, 'MON-DD-YYYY'),
  11,
  (11) result_to_oo,
  CPF. PLAN_MON_FEATURE_ID,
  CMF. MONITORED_FEATURE_ID,
  mpa.PA_CODE,
  MPF. SITE_FEATURE_ID
  of fm_report_category ERS,
  m_feature mf,
  m_pa_features mpf,
  m_protected_area mpa,
  snh_designations sd,
  cm_monitored_features FMC,
  cm_plan_mon_features FCP,
  cm_monitoring_status cms,
  cm_cycles cc,
  msa m_pa_snh_area,
  snh_management_units smu,
  ssa snh_sub_areas
  where frc. REPORT_CATEGORY_ID = mf. REPORT_CATEGORY_ID
  and mf. Feature_code = mpf. FEATURE_CODE
  and mpa.PA_CODE = mpf.PA_CODE
  and mpa. DESIGNATION_ID = sd. DESIGNATION_ID
  and the mpf. SITE_FEATURE_ID = FCM. SITE_FEATURE_ID
  and CME. MONITORED_FEATURE_ID = cpf. MONITORED_FEATURE_ID
  and cms. MONITORING_STATUS_ID = FCM. MONITORING_STATUS_ID
  and cc. CYCLE # = FCM. CYCLE #.
  and msa.PA_CODE = mpa.PA_CODE
  and msa. UNIT_ID = EMS. UNIT_ID
  and msa. SUB_AREA_ID = ass. SUB_AREA_ID
  and cc. CURRENT_CYCLE = 'Y '.
  and msa. MAIN_AREA = 'P '.
  and msa. SCM_LEAD = 'Y '.
  and the mpf. INTEREST_CODE in (1,2,3,9)
  and ((nvl (: P6_REPORTING_CATEGORY, 'TOUT') = 'ALL'))
  and to_char (frc. FCA_FEATURE_CATEGORY_ID) = case nvl (: P6_BROAD_CATEGORY, 'ALL') when "ALL" then to_char (frc. (FCA_FEATURE_CATEGORY_ID) else: P6_BROAD_CATEGORY end)
  or (nvl (: P6_REPORTING_CATEGORY, 'ALL')! = 'ALL')
  and to_char (mf. REPORT_CATEGORY_ID) = case nvl (: P6_REPORTING_CATEGORY, 'ALL') when "ALL" then to_char (mf. REPORT_CATEGORY_ID) else: P6_REPORTING_CATEGORY end))
  and ((nvl (: P6_SNH_SUB_AREA, 'TOUT') = 'ALL'))
  and to_char (msa. UNIT_ID) = case nvl (: P6_SNH_AREA, 'ALL') when "ALL" then to_char (msa. (UNIT_ID) else: P6_SNH_AREA end)
  or (nvl (: P6_SNH_SUB_AREA, 'ALL')! = 'ALL')
  and to_char (msa. SUB_AREA_ID) = case nvl (: P6_SNH_SUB_AREA, 'ALL') when "ALL" then to_char (msa. SUB_AREA_ID) else: P6_SNH_SUB_AREA end))
  and ((nvl (: P6_SITE, 'TOUT')! = 'ALL'))
  and mpa.PA_CODE =: P6_SITE)
  or nvl (: P6_SITE, 'ALL') = 'ALL')
  
  As you can see I have 9 calls the APEX_ITEM API and when I get out them the works of report that I expect.
  
  Has anyone else ran into this problem?
  
  We're currently on APEX: 3.0.1.00.08 and using Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit, Production database.
  
  Thanks in advance,
  Paul.

  Try to remove all except one of the calls apex_item.select_list_from_query, and then rewrite this one to use subquery factoring. Now compare at the same time for the same query with and without subquery factoring. In addition, 500 lines is a realistic number that you expect someone to change?

• How to use Acrobat JavaScript to perform digital signature (e-sign) in several PDF documents?

  With this script, I can perform the signature batch:

  Choose the Manager

  var manipulador = security.getHandler ("Adobe.PPKLite");

  Login - change as the case

  manipulador. Login ("test123", "/ D/Users/p004826/AppData/Roaming/Adobe/Acrobat/10.0/Security/Israel.pfx");

  information

  myInfo var = {password: 'test123',}

  Reason: "como Salvar tests."

  {CDM: 'defaultAndComments'};

  Invisible sign

  this.certifyInvisibleSign({)

  oSig:manipulador,

  oInfo:myInfo,

  cDIPath:"/c/temp/sigSign.pdf,"

  cLegalAttest: "Certificado ussando o JavaScript."

  bUI:false

  });

  But he accomplished only with a. File saved locally PFX. I am trying to find a way that allows the user to insert a card and enter a password for the electronic signature. Anyone know anything else?

  Sorry for my bad English

  Thank you!!!

  Finally, I managed to solve. As a result...

  / * Sign documents requesting the password/PIN * /.

  / * Israel * /.

  If you want to see the result, uncomment

  Console.Show ();

  Console.println ("Start");

  Starts the Security Manager and connects.

  var vPPKLiteHandler = security.getHandler (security. (PPKLiteHandler, true);

  vPPKLiteHandler.login({bUI:true});)

  Console.println ("Logged: isLoggedIn =" + vPPKLiteHandler.isLoggedIn);

  Event.RC = vPPKLiteHandler.isLoggedIn;

  If (! event.rc) {}

  App.Alert ("Login failed for signature - Signature in batch abandoned.");

  throw "Login failed" ;}

  signs the document, the routine certifyInvisibleSign already registered

  Event.RC = this.certifyInvisibleSign (vPPKLiteHandler);

  Console.println ("assinatura da Resultado:" + event.rc);

  If (! event.rc) {}

  App.Alert ("doesn't have the signing of the document" + this.documentFileName)

  +"- Signature in abandoned lot. ») ;

  throw 'Fail to sign' ;}

  Note: This action is possible by opening Acrobat X. After execution, you can select the PDF file or select the directory that contains the PDF files.

  NOTE2: Sorry for my bad English

• Displayport ENVY causes battery lose detection and performance max brightness

  I have a HP ENVY 17 - 3D was released in early 2012, running Windows 7.

  It has 1 HDMI port and 2 additional display ports. The graphics card is ATI HD 7690 M XT and supports switchable graphics on the fly.

  The processor chip is 2nd generation Intel Quad Core i7.

  Problem

  When I use the displayport cable "Displayport to DVI" connector active, my battery would not be detected, and the brightness of the computer screen laptop builtin automatically tops out at 100%, without the possibility of reducing its brightness in my custom settings powerplan (100% light is bright for me). I recently started to use the displayport to send video clips as extended desktop to an old monitor LCD of Sony, which has instead of the latest HDMI DVI. The HDMI port has now been connected to the flat screen TV. Even if I converted the portable/DVI on the old Sony HDMI signal, and only a monstercable adapter-nothing fancy, I never lost the features. This started to happen when I started using the display port...

  However, as soon as I return to the HDMI output that is unique to all monitors, my battery is still visible, and I can adjust the brightness of the screen through my powerplan again...

  This problem is only apparent when I use display port...

  Finally, the catalyst software is the original that came with the machine I can't update this because nothing else apparently takes in charge the switchable graphics and have had bad luck with the newer versions... If I'm wrong please let me know...

  What I try to do

  Very simply, the laptop's HDMI port will connect directly to a TV dish 1080 p SAMSUNG. This image is simply a mirror of the laptops display, which is also the same resolution - 1080 p. The old Sony monitor simply connects to the Displayport now via an active adapter 'Displayport - to - DVI' to use the extended desktop.

  Overall, it's just 1 screen flat TV cloned/updates mirrored on the laptops display in the same resolution (1080 p), and 1 smaller screen for the range of extended desktop. So 3 screens are light in total:

  Laptop + SAMSUNG TV via HDMI direct (in mirror and identical - the two 1080 p resolution)

  Monitor Sony via displayport using '-Displayport to DVI-' active adapter.

  Everything else works fine - I just lost my battery and the ability to control my screen brightness, which is huge for us with power outages and have reduced the brightness...

  If anyone has had this problem and what should I do?

  Any help appreciated...

  Thank you very much

  GIO

  Hi @GGHP2016,

  Thank you for the update.

  If you remove the battery and always start your laptop, you can use your laptop without the battery.  If you leave the battery installed you can still use it on current alternative.

  Please contact HP shopping for help in purchasing the correct battery. 1 800 hp direct (800-473-4732).

  Please let me know the results.

  Good luck!

• TestStand 4.1.1 crashes when you use two or more "perform asynchronous VI" at the same time

  I'm under a terminal constantly reading window from a serial port running in a different thread using "Run asynchronous VI".

  Towards the end of the test, I open a separate VI in another thread also uses "asynchronous Execute VI.  This VI reads constantly the Ethernet packets.

  I'm running the sequence in the user interface of C++ and for some reason, once in a while TestStand crashes and in the dialog box it said it

  "The MFC example user interface has encountered a problem and needs to close.  We are sorry for the inconvenience. »

  The error signature:

  AppName: testexec.exe AppVer: 4.1.1.55 ModName: msvcr80.dll

  Any of you have an idea as to why he would do this?  Also, what is the best way to open and close these threads?

  Any help would be greatly appreciated.

  
  

• Use CPU in Task performance master color codes

  The red and green color codes showing CPU utilization in the section master achievement mean anything? I have a XP computer that shows two lines, a red and a green for the use. My other computer XP shows a single green line.

  The green color indicates cpu usuage
  and the RED color show kernel times

  
  
  Concerning
  www.hexcoders.org

• Use the mouse to perform fine tuning settings

  I just installed Ligthroom improved Ligthroom 1.4 2.5; It seems that I can't no more fine tuning of the adjustment by using the mouse wheel, but I am stock to move slides by dragging with the mouse or by entering a value...

  is the ability of mouse wheel to make the SETTINGS abandoned with Ligthroom 2.5; If this is not the case, how I got on the use of the mouse wheel?

  Thank you

  The ability to use the scroll wheel of the mouse for cursor adjustments has been removed from Lr2 as it was causing data loss. 'Some' mouse models you can press the scroll wheel to activate the function, but I do not have models.

• I use Windows XP Dell computer - I downloaded some drivers and now my monitor won't work, but thesystem is running in the background. How can I get my monitor appears again?

  Hello

  I recently downloaded some drivers using the software "Drivermax" and in doing so, I restarted my computer Dell Windows XP, whom he treated and Startup logo XP deleted monitor on me but the system is still running. There no display no matter what he went completely empty on me. I tried restarting several times more and it begins as bright until properly on newspaper and he then he goes empty dark again on me. I tried the BIOS setting, but nothing happens... I believe that I have installed the drivers screwed something... I well surly need help here.

  Thank you
  Dave

  I gave it try but without success. No idea how to install the driver in safe mode

  You could use the system restore and roll back to a point just before that you have installed the drivers.

  A little advice about these utilities "update Driver", ditch just them!  Basically, they cause more harm than good, and some of them are dangerous simple!  You don't need those utilities and nine times out of ten people update their drivers for no other reason that they think that the new drivers are better than work perfectly those they already have.

  John

• The use of laptop Dell Inspiron 6000 with D - Link DIR - 615 router and a Wireless N adapter, but showing the G signal

  I have a Dell Inspiron 6000 laptop and I use a router D - Link DIR-615 and a Wireless N adapter, but when I checked my settings, I received only a G signal. What can I do to get a N signal?

  * original title - how will I know if my cell phone is compatible? *

  The chipset WiFi the only information that I could source on the Inspiron 6000 ranked either the Dell Wireless 1390 802. 11b / g card mini or Intel Pro/Wireless 2100 802. 11 b / g mini card.

  None of them is compatible with N.