Maintenance before damage estimates

Similar Questions

• Need help on image damaged

  Hello

  Please see attached and if anyone ever sees the damage before please let me know the cause and its solution.

  Sometimes seeing the images to 600% - I know it is not necessary to see 600% on a regular basis, but would like to know what it is.

  Magnifying up to 500% is quite good, a few pixels. But after 500%, each pixel has a white border. Have never seen such before damage.

  Right: damaged 600%

  Left: undamaged to 600%

  They are multilayer files but not filtered, not sharpened.

  Perhaps conversion question sRGB - > RGB 1998?

  Please give me any input you think from here.

  Thank you very much for taking the time...

  Go to the view menu and select view > pixel grid - deselect its visibility.

• How often should I plug my 2016 macbook pro?

  Just bought a macbook pro a few months after having been a user of HP laptop, I try to understand how to keep the stack "exercised."  When does not run CC Adobe, just browsing my fully charged battery in chrome and safari shows a life of 3 hours (which seems low for me).  I kept it plugged in most of the time for a few months, but someone told me it was bad.  So my question:

  1. how often should I plug it into my macbook?  I use about 11 hours a day, if that he'll need to be plugged in some of the time, but what is the best plug in/no plug in jacquard?

  2. when I stopped for the night, should I keep plugged, or unplug it?

  You can keep the MBP plugged in most of the time.  Load circuits will load to 100% and leave the battery to 95% maintenance before charging again.

  Mine is plugged into a large part of the time, but I use battery life up to 30-40% at least once a month.

  Use as needed... power off when it is mobile, but to plug several times during the day on top of the load.  Just don't run it less than 10% and certainly do not run it dead... both damage the battery.

• hpe - 337C ww583aar wiring diagram

  USB ports before damaging the USB devices. Suspect MB of wiring to the USB ports on the front panel, but you don't know where the riders should go.

  MB has 6 positions labeled header - JUSB1, 2,3,4,5,6. JUSB1 & 2 seem to accept the connectors 1 X 5 or 2 X 5. JUSB3-6 accepts only 1 X 5 connectors.

  Two front jumper cables have connectors 1 X 5. Pin 1 = red, 2 = white, 3 = green, 4 = black, 5 = white/matched.

  Currently - the front panel low port USB is rider for JUSB1 (pine 1,3,5,7) & the USB ports on the front top of the page are related to JUSB2.

  Sorry, but there is no wiring diagram. If the cable has a connector 1 x 5, the best locations to plug in the USB headers 3-6 East. If the cable has a connector 2 x 5, the best locations to plug in the East headers USB 1 & 2.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Setup wireless network to Satellite A10

  How can install a wireless network to Satellite A10

  Hello

  As far as I know this unit is scalable and compatible cards WiFi are wireless (802 11b Agere) PA3212U-4MPC and PA3273U-2MPC(802.11a/b) LAN card. I'm not 100% sure, but the slot must be somewhere under the keyboard.

  If you do not know how to do this contact the technicians or your dealer before damage you the cover on the keyboard or some other contacts.

  If you have any other questions, please write again.

  Good bye

• License purchase vs Vworkspace WSM

  CDW today told me that my order a week ago licenses WSM has been cancelled due to these licenses being abandoned and are now absorbed into the vWorkspace line.  My rep said it isn't a very clear way for him to sell me vWorkspace licenses yet, but he's looking to see if it's possible.

  I quite desperately searched for these licenses for expansion here, have boxes, users start soon - but no permit to practice to get there.

  I use WSM 6.0, that are supposed to make licenses?  Anyone know?

  Eric

  Eric,

  When you bought WSM in the past, you use just for the software that ends as specified in the license file.

  Software maintenance gives access to the plus version and while the maintenance is active and has been sold separately. The interview is not active, you can still use the software, as you own.

  WSM was sold only with the maintenance for one year, with the possibility of extending to the maximum of three years at the time of purchase or renewal of maintenance before moving to the inactive state.

  If you don't have maintenance underway WSM, the exchange of license program is not applicable. However, you can renew your maintenance by buying vWorkspace first edition by access device (which includes maintenance for one year and is perpetual).

• Can windows7 retail key asset OEM Dell disk on the other computer (Dell no)?

  Hi, I have a Dell laptop with 32-bit windows7 proffessional preinstalled. In addition, it has sticker OEM key on the back. I've damaged seriously this laptop which cannot be recovered by mistake (before damaged, re-setup for windows not happens on this laptop). I also has a self-construction (not Dell) desktop that is runing windows XP. I downloaded the release version of windows 7 Professional 32-bit digital river. If I install the retail of windows 7 Professional 32-bit on my desktop, can I use the OEM key in my laptop for activation?

  If so, the activation can be completed via the internet? Or should I call the Microsoft hotline to explain what is happening so that activation is possible? Thanks in advace.

  No, you can't.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Replace the Panel of e/s on Presario SR5310F

  I have a desktop Presario SR5310F of a handicapped with a panel of IO before damaged friend.  There was a USB unit plugged into the front panel and the cord was tripped and pulled on the hard side.  Both USB ports are damaged and headphones and speaker inputs are also (on the same panel).

  HP part number is 5070-2909.  HP parts store has listed online, but it is not available on order.  (I checked with 'resellers' HP recommends for the part but can't find it.)  I called the HP parts store and they told me they could find a product that is 'comparable' to me, but then I went to a foreign expert who said that he was unable to understand what I wanted to order.  I guess the HP part number, part name HP, model of computer, s/n (3 times), was much too much information.

  There are rear USB ports, and I can route an extension to the front for him, but I would like to replace the Panel if possible.  A search of this part product on the internet, ebay, etc does not work.  Thanks for any help.

  Google: 2 minutes

  $26 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180630249876&hlp=false&rvr_id=216889641277&crlp=1_263602_304652&UA=WVI8&GUID=922302ea12e0a02697e779a7fff7d85b&itemid=180630249876&ff4=263602_304652

  $40 http://www.sparepartswarehouse.com/Compaq, Computer, share, 50702909.aspx must specify or call

  varied http://www.google.com/products/catalog?hl=en&sugexp=gsisc&xhr=t&q=5070-2909&cp=0&bav=on.2, or & wrapid = tljp129980559351700 & um = 1 & ie = UTF - 8 & cid = 3959108179159633093 & a = X & ei = m3V5TeCBD4SKlwfc4InrBQ & sqi = 2 & ved = 0CCUQ8wIwAg#.

• ESXi ip address change

  I am reviewing our network across IP address assignments and I was curious to know if there was a negative impact to change the IP addresses of our host machines?

  If your host is part of a cluster with HA active, disable HA or put the host in maintenance before the change of the IP address of management and do not forget to update DNS record for the host.

• dependence of vCenter

  I need to do some work on my vCenter database and was curious about the behavior of the environment seen while vCenter is out of service. I know that this administrative task view such as the start and stop of work stations will be unavailable but connection base felt Broker functionality would always be there. Everyone does this type of maintenance before and can share your comments?

  Hi mittim12,.

  Brokerage to existing jobs should arrive without problem a lot. Things must ensure that to access pools with certain policies could eventually error such as, power politics, configuration etc. of spare. So before you perform this maintenance, power change a strategy of first pools result and delete alternative configurations, planning automatically provisioning ops (such as delete them after use, updating after use etc.). But defenitely journal of policy will have no impact.

  I don't know that you would take necessary backup before the interview.

  Best regards

  Siva

• Computer seems to do a lot of thinking before running each statement. There are files missing or damaged?

  Original title: is there a way to know if my copy of windows is missing files, etc?

  My computer seems to do a lot of thinking before running each statement checked upload / speed download, everything is fast, must be my corrupts, could be operational with missing or damaged files, anyway to check?

  Hello

  1. Are you referring to the performance of the computer?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  You can also refer to:

  Maintenance tasks that improve performance.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• Evacuation of the virtual machines before maintenance mode

  When ESX is placed in maintenance mode - it should give you a vmotion option functioning of the virtual machines on the other hosts in the same cluster?  Or it only move down vms to other hosts?

  Thank you

  DRS is your friend here, ensuring that VMS are evacuated.

  If you are unable to vMotion VMs manually from the host, the y is unable to escape during operations in Maintenance mode. The host will therefore go not in maintenance mode before having been involved and sort the vMotion.

  Most often, CD-ROM etc are involved here, but validation of vMotion also includes such things as the availability of resources and port groups (that is, if a group of ports corresponding to that used by the virtual machine is not available on another host in the cluster that has the resources available, the vMotion will not pass validfation and the virtual machine will remain on the host of 'Maintenance Mode').

• water rescue damaged phone before the appointment of engineering

  I dropped my iPhone 6s in accidentallly water and I have a genius bar appointments to come, most probably need a replacement phone. To back up my phone before going I'm because my phone is dead, I can't sync the phone with iTunes because it asks me to enter my password on the phone, what I can't. Is there another way to save or work around it?

  Thank you.

  No, there is nothing you can do. As is always the case when the worst happens, the time to make a backup to date was before the disaster. Subsequently, you are out of luck.

• How do you determine if a Vista COA is SLP before replacing a damaged motherboard?

  I have a small construction company and PC repair.

  I have a PC for a customer (eMachines E4252) which is not the usual way of eMachines. Bestec PSU blowing from the motherboard. The original motherboard (is no longer available) and power supply are to be replaced by another.

  How will I know if the Vista COA is BIOS locked to the damaged motherboard until I'm starting work, changing technology?
  I have no time to lose if the customer will have to pay to get a new copy of Windows, because it will then do the job economically not viable for them.
  Say there is no way to do this is an unacceptable response, because in software programming just about anything is possible if the programmer codes it so.
  I have already spent a lot of time looking for it and as I said, I have no time to lose.

  Please can someone help,
  Kind regards
  Tim Howard

  I have a small construction company and PC repair.

  I have a PC for a customer (eMachines E4252) which is not the usual way of eMachines. Bestec PSU blowing from the motherboard. The original motherboard (is no longer available) and power supply are to be replaced by another.

  How will I know if the Vista COA is BIOS locked to the damaged motherboard until I'm starting work, changing technology?

  I have no time to lose if the customer will have to pay to get a new copy of Windows, because it will then do the job economically not viable for them.

  Say there is no way to do this is an unacceptable response, because in software programming just about anything is possible if the programmer codes it so.

  I have already spent a lot of time looking for it and as I said, I have no time to lose.

  Please can someone help,

  Kind regards

  Tim Howard

  Buna,

  Being an eMachine, it would be an OEM license, which means that the preinstalled Windows operating system is locked on the first hardware that is installed on...

  Microsoft considers the motherboard towards the heart of the computer.

  You want to replace this motherboard with another model of motherboard, which means that the re-Activation will fail.

  You should be in contact with Acer who now owns the eMachine brand and explain all the non-existent replacement for the original motherboard and request their assistance.

  Revedere.