user-generated event does not record

Similar Questions

• structure of the event does not record local vars

  I have a gif of a FPGA based topology I want to show some telesignalisations in.  As the user clicks on the Boolean, vertical lines appear and disappear as they click on it again, showing the current topology of closure.

  To save resources, I opted to use a structure of the event.  So far I put it for internal RX_FAC and RX_TERMXCO4AU you see at the top left of the image.

  A single loop of RX and one TX closure may be on at the time, so one of the first things that happens when the user clicks on the Boolean value is that it defines the values of all other Boolean in the same row of fake, thanks to the use of local variables.

  The problem is - the structure of the event runs only when the user actually clicks the Boolean true or false value, but not if the boolean is false through the use of a local var.  In other words, let's say I RX_TERMXCO4AU true and false RX_FAC.  If I click on RX_FAC to set it's true, then you will notice RX_TERMXCO4AU goes dark/false and RX_FAC lights.  So the value of RX_TERMXCO4AU has changed, but associated with the structure of the event RX_TERMXCO4AU does not run (that's why the vertical line between RX_TERMXCO4AU and TX_FACXCO4AU remains).

  This will make a lot more sense if you run the attached simple VI.  Right now, events exist for RX_FAC and RX_TERMXCO4AU, but it is sufficient to explain the problem I think.

  Any help is appreciated.

  The structure of the event is for events generated by users.  Writing to a local variable is a programmatic change.

  You want to do is write your value to the Value property (Signalling) of the Boolean that will change the value and raise the value change event.

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Application module does not record the client interface

  Hello.
  
  The problem is that the application module does not record the client interface that is automatically generated classes.
  
  Whenever I go to the module of the application and add them, they will be gone next time I open the workspace. Is this a known bug or is there something that I am missing?
  
  I use jdev 11g relsease 2 version 11.1.2.3.0.
  
  Please help, because I can't get anything done.
  
  TIA

  Possible cases:
  -There is something wrong with the method you created.
  -The return type does not match

• Bit data does not record

  only two field data does not record. I placed a script, it works fine, but when it is open after saving a file, the fields are empty. Why this happen?

  event of calculation:

  var a = Itemnumber.rawValue;

  rowb var = xfa.resolveNodes ("form1.page2.Subform1.Table1.Row2 [*]");

  rowc var = xfa.resolveNodes ("form1.page2.Subform2.Table1.Row2 [*]");

  var WDT = xfa.resolveNodes ("form1.page2.Subform3.Table1.Row2 [*]");

  for (var i = 0; i < rowb.length; i ++)

  {

  var b = rowb.item (i). Calculation.rawValue;

  var bb = rowb.item (i). Total_dispensing. RawValue;

  if(a==b)

  var x = bb;

  }

  for (var i = 0; i < rowc.length; i ++)

  {

  var c = rowc.item (i). Initial.rawValue;

  var cc = rowc.item (i). Site2.RawValue;

  if(a==c)

  var y = cc;

  }

  for (var i = 0; i < rowd.length; i ++)

  {

  var d = rowd.item (i). ActualPatients.rawValue;

  var dd = rowd.item (i). Actual_patient. RawValue;

  if(a==d)

  var z = dd;

  }

  this.rawValue = x + y + z;

  If (this.) RawValue == 0)

  this.rawValue ="";

  In addition, I use acrobat X pro. another field of data in the same form to be saved.

  I extended my sample to manage the numbers Actual_patient as well, it looks like now.

  If (!.) Itemnumber.isNull)

  {

  this.rawValue = 0;

  rowb var = xfa.resolveNode ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  If (rowb! == null)

  {

  this.rawValue += rowb. Total_dispensing. RawValue;

  }

  rowc var = xfa.resolveNode ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  If (rowc! == null)

  {

  this.rawValue += rowc. Actual_patient. RawValue;

  }

  }

  And if the number can be duplicated, then it would look like.

  this.rawValue = 0;

  If (!.) Itemnumber.isNull)

  {

  rowb var = xfa.resolveNodes ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  for (var i = 0; i)

  {

  this.rawValue += rowb.item (i). Total_dispensing. RawValue;

  }

  rowb var = xfa.resolveNodes ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  for (var i = 0; i)

  {

  this.rawValue += rowb.item (i). Actual_patient. RawValue;

  }

  }

  I updated my sample https://acrobat.com/#d=uQmAFWaVoHydJQ1Xtf0QhQ

  I still don't know how the values of number, calculation and ActualPatient are created in my example, you have to key in, once indexed in the match of calculation the expected results, you posted.

  Concerning

  Bruce

• I wan to save my history Web sites, but my computer does not record. I go to tools &gt; options &gt; privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• Satellite L655D - user profile service does not load

  I was not able to log in to my partner on a new user account, guard showing the message user profile service does not-
  I have already tried to use face recognition, but was not able to configure it correctly and delete the account.

  The problem of user accounts has been present since I deleted the account of recognition of faces.

  Any ideas how I can restore the user account created for someone else on this computer.

  Hello

  I think that there is already a solution for this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57534

  This seems to be a known issue of Windows and you can fix that running the Microsoft Fix this Microsoft Fix it 50446 problem provided by Microsoft

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• value chain control event does not trigger change

  Hello

  I am trying to scan a barcode with a barcode usb HID scanner. I use a structure of the event to detect the change in the value of a control of the chain. When I scan the barcode, the chain control updates on the front panel, but the event does not fire until I left on my mouse on the front panel. can someone help? See attached vi

  Your barcodes are probably fixed length. When you get an event, check the length. If it corresponds to the length of the barcode, then process the data, otherwise wait for more characters.  This can be treated very quickly in the case of the event.

  Lynn

• the R channel does not record on ION U RECORD.

  the R channel does not record on ION U RECORD.

  original title: ION U RECORD.

  Hi Patrice,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Cancel the registration of events does not not to change value

  Cancel the registration of events does not seem to prevent the change in value of firing event.

  I've attached an example of change that disables the mouse enter and exit events to include the value Change event.

  Document ID 4ATCBP1U

  http://digital.NI.com/public.nsf/allkb/E3E5E1B3021D8EFA8625730A0062F52D

  You use the standard event, not the dynamic one (note that the Boolean value does not have the <> ).

• Whenever I have check the box to save my e-mail address when you sign in, it it does not record the next time I visit the Windows Live Hotmail.

  I checked the save my email address box, but it does not record

  original title: can not enter hotmail sign to save my e-mail address

  Hello

  As the issue is specifically related to Windows Live Hotmail, I suggest that you post the question on the link provided below for assistance.

  Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

• Sound Recorder does not record

  Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2

  Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2

  ===============================================
  Maybe the following response has already posted by: Azam K. would be worth a peek:

  Sound Recorder does not not under Vista
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/cf6003b6-AADD-4107-a1b7-2c9b88a3f48b

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why my microphone does not record any sound?

  So, I try to activate the sound of material & sound-> Sound-> record, succeed in that, then try to test. And my microphone does not record anything yet (I have the latest drivers), it is a headset and it is not silent. I've reconfigured it, it didn't work.

  So I tried a new micro, it worked too.
  Can you give me an answer to what is happening and how to fix it?

  Hello

  Did you change your computer before this problem?

  Try the following steps to cross check if the microphone is correct.

  a. Click Start, type mmsys.cpl in the search box and press ENTER.

  b. in the sound dialog box, click the recording tab.

  c. click Microphone, and then click Properties.

  Note: Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.

  d. in the properties of the Microphone dialog box, click the custom tab.

  e. turn on or off the amp Microphone check box.

  f. click the levels tab adjust the slider for the volume to the desired level and then click OK.

  g. click OK to close the sound dialog box.

  See also:

  Open the troubleshooting of Audio recording

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Connect one microphone, music player or other audio device to your computer http://windows.microsoft.com/en-US/windows7/Connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Windows Media Center does not record the calendar.

  Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  I would have you refer to the article below:

  Why my TV did not show record in Windows Media Center?

  http://Windows.Microsoft.com/en-in/Windows7/why-didn

  Please let us know if that helps.