User name and password for the installation of VUM on 5.1
During the installation of VUM you mush, enter a user name and password. I am referring to the screen that says
vCenter Server Information
Enter in vCenter Server location and credential information
"Please provide the necessary information on the server vCenter Server below. VSphere VMware Update Manager will need this information to connect to vCenter Server on startup"
Admin@system-domain should be used for this as it is used for component inventory server and vCenter facilities, or if you have a dedicated account for this other than admin@system-domain?
If I used admin@system-domain during initial installation, what is the impact of the removal of the admin@system-domain to have privileges in vCenter Server?
Thank you
all credentials are for performs authentication in vCenter initially and they won't be reused. I would like to use a domain account that is part of the Administrator role in vCenter.
It is not a service account, VUM runs as local system.
Tags: VMware
Similar Questions
-
I want to print my user name and passwords for the survivors.
I plan not to die anytime soon, but I am 78 and must prepare in the event of disability, so that my children can access to my Bank, security soc, etc.. I would like to get a hard copy passwords to put with my papers.
Password exporter {web link}
This extension allows you to export your saved passwords and disabled people
guests of connection using XML or CSV files can be imported later. -
Oracle APEX server requires a user name and password of the server said XDB?
Hello
After you install version 5.0 of the APEX and tries to access the page admin APEX with EPG, I am invited with a pop-window that asks you a user name and password for the XDB?
Does somone has experience with it? What can be wrong in the configuration?
Thank you in advance.
Kind regards.
Hello
I found the problem.
Is there somwthing wrong in the security settings.
I re - run one of the steps with the right parameters of the call:
DBMS_NETWORK_ACL_ADMIN.append_host_ace
There is an error in the settings.
Now, I'm working.
Kind regards.
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}
Question:
Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.
Background:
We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:
Switches:
User name:domain-username
Password:password-field
SWITCH >Activate
Password:Enable-password - to-Active Directory
SWITCH #.
Firewalls (as they are now):
User name:domain-username
Password:password-field
Firewall >enable
Password:password-field
FIREWALL #.
With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:
Current configuration of the switch:
AAA new-model
AAA authentication login default local radius group
AAA authentication enable default group enable RADIUS
AAA authorization exec default local radius group
AAA - the id of the joint session
ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646
Server RADIUS ports source-1645-1646
RADIUS server key 7 1234abcd
Current configuration of the firewall:
RADIUS protocol AAA-server DC01
AAA-server DC01 (outside) host 192.168.0.1
authentication AAA ssh console LOCAL DC01
Console to enable AAA authentication LOCAL DC01
1234abcd keys
Any help would be great, thanks!
You must use GANYMEDE + instead of RADIUS for this.
Here, you can use command sets in the results section of the policy.
-
I own an iMac and macbook pro and recently was invited to update flash player on the iMac and it worked perfectly. The guest even today came on the macbook, but the installation process does not recognize my user name and password. Even went to the Web site and changed the password. Still does not recognize it. I can't even remove the software done without it. It is growing tedious.
Ron
is it a mac password?
If you are not sure, attach a screenshot of the command prompt.
for adobe reader, you can directly download and install Adobe Flash Player Distribution | Adobe
-
How to register more than one user name and password for a Web site?
First of all, let me say that I am extremely irritated that I just spent 15 minutes written a very detailed question and researching my OS, browser version, etc., as all have cleared because I don't "check" my e-mail address before I started typing my question. Firefox: correct your registration and the issue of the accounting process so that this happens. He should keep your info for a smooth running of the process, after checking. What a waste of time and effort when I'm already frustrated.
REAL QUESTION: I managed two calendars online under a single root URLS (www.samplepage.com/calendar1 and www.samplepage.com/calendar2). My e-mail address is the user for both accounts ID, but passwords are different.
FF used to associate ALL of the URL of your user name and password, but now it combines only the root (www.samplepage.com). So, for me, will remember only one password.
How can I get to remember TWO passwords?
Thank you!
This is not possible with the Firefox password manager. You can only save a user name and password once for a specific field, so if the name is the same then it does not work.
-
Vista suddenly requires user name and password for peer network XP, WHY?
Network is a mixture of XP Pro with Vista Home machine. Vista had been particularly transparent connection to a peer network XP, but suddenly invites to indicate the user name and password to login. Only the user for this XP is 'Admin', but login is not necessary. Why is Vista promting to connect? All attempts to answer fast connection with the good username and password fails. Why? How can I make Vista not prompt connection again?
Try here:
Vista - XP and Vista Peer to Peer
http://www.Vistax64.com/Vista-Networking-sharing/126779-XP-Vista-peer-peer.html -
local user name and password if the ACS server fails
Hello
I have every router and switch configuration for authentication of the connection via the ACS server. I used these 12 lines below and it works very well. Each engineer has their own account.
AAA new-model
AAA of default login authentication group Ganymede + activate
the AAA authentication enable default group Ganymede + activate
AAA authorization exec default authenticated if
AAA authorization commands 15 default group Ganymede + authenticated if
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
Default connection accounting AAA power Ganymede group.
AAA - the id of the joint sessionRADIUS-server host x.x.x.x
RADIUS-server application made
radius-server key, regardless of----------------------------------------------
I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password
username privilege 15 secret mypassword MYUSERNAME
line vty 0 4
local connectionQ. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?
Kind regards
Kevin
Now you have the password to enable as the fall back method:
AAA of default login authentication group Ganymede + activate
Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.
The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).
-
What is the default user name and password of the dynamically created edge NSX gateway?
Hello
I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?
Thank you
Pankaj
I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.
-
How to pass a user name and password in the URL for report BI Publisher as parameters
Hi all
I have a requirement to navigate to a specific report in the BI Publisher a
external application when the user clicks on a link. I've had this work using
the link below
https://blogs.Oracle.com/XmlPublisher/entry/accessing_xmlp_enterprise_repo
Now, when a user clicks on this link he is redirected to the BIPUBLISHER login page,
How can we get around this to hardcode a username and password in the URL (like GO
URL for analytics).
Thank you
Hello
https://
> /Analytics/Saw.dll? Answers & NQuser => & NQpassword => Kind regards
Dilek
-
e-mail requesting the user name and password for pop3
problems with the email asking me for a username and password for pop3 - just installed norton the other day now that I can't in my box to
If you already have Windows Mail configured correctly and have been using it OK, turn off the analysis of e-mail by Norton.
See you soon.
Mick Murphy - Microsoft partner
-
How can I add user name and password in the target of the shortcut
I have several shortcuts that require different from the username and passwords then my logon credentials.
I know that there should be a way to add the username and password in the target of the shortcut.I found several online orders, but none of them does not seem to work.
following commands were tested:
/ u: Administrator /p:P@ssw0rd!
u user_name-p password
-l votre_nom_utilisateur - pw votre_mot_de_passe
UserID = user/password
/ User UserName /pwd password
/ username username /pwd passwordHello
- Your computer is on the field?
- What application do you need to save your id and passwords?
- Are you referring to online applications?
If the computer on the domain, I suggest you contact the technet forum, where we have some support professionals who are well equipped with the knowledge on area issues, to do that please visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads -
I invoke PurchaseOrderService, Version 2, as part of the Rel9. I use wss_username_token_over_ssl_client_policy security policy.
How do you manage the Username and the password?
Here is a code snippet:
SecurityPolicyFeature[] securityFeature = new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_username_token_over_ssl_client_policy") }; purchaseOrderService_Service = new PurchaseOrderService_Service(); PurchaseOrderService purchaseOrderService = purchaseOrderService_Service.getPurchaseOrderServiceSoapHttpPort(securityFeature); WSBindingProvider wsbp = (WSBindingProvider)purchaseOrderService; wsbp.getRequestContext().put(WSBindingProvider.ENDPOINT_ADDRESS_PROPERTY, "https://prc-XXXXXXXX.oracleoutsourcing.com/prcPoEditDocumentOrder/PurchaseOrderServiceV2"); wsbp.getRequestContext().put(WSBindingProvider.USERNAME_PROPERTY, "myUsername"); wsbp.getRequestContext().put(WSBindingProvider.PASSWORD_PROPERTY, "myPassword");
This doesn't seem to be a very safe way to manage the usernames and passwords.
What is best practice?
Thank you
Arie
You must use the store of credentials, for more details, refer to:
- Development with the Framework of Bank of credentials
- Java Cloud service - users to access the user mapping in the store of credentials
--
Jani Rautiainen
Relationship with the developers of Applications in fusion
-
User name and password for Windows 7, install new.
I just installed Windows 7 on my computer and it asks me a username and password. How can I find out what my username and password are I never put in place and never had a single installation on Vista either?
You can try a number of things, please see the following articles:
Or:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
Credit: Ronnie Vernon MVP
If you have an installation of Windows 7 disk, see the following article.
How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.
Answers Support Forums password policy
Keep secure passwords - Microsoft strategy on move the passwords
Microsoft's official policy
Microsoft's strategy concerning lost or forgotten passwords
-----------------------
If the problem persists, start in system recovery environment in Windows 7, simply start your PC. Just before that the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.
When loading the system recovery environment, click command prompt:
We will try to create a new user account.
Example: net user username password / add
Where there are replacing username with the name of the account and replace password with the password.
Example: net use adacosta2 pwhelp / add
Press Enter on your keyboard
You should see the following message, the command completed successfully.
Type exit to close the command prompt.
Restart the machine and try logging into the new account.
Maybe you are looking for
-
HP 19-2113w: how to connect HP 19-2113w tv HDMI
I am looking for directions on how to connect my HP 19-2113w to my TV via HDMI. Could someone guide me please? Thank you!
-
How can I reformat my hard drive without losing my applications like MS Office and Adobe PS?
I have MS Office 2010 and Photoshop CS5, the last time I had to reformat I had to reinstall everything and lost access to some programs.
-
Explorer window - opens in itself non-stop
I have Vista and Explorer opens the window no stop itself if I'm on the computer with the help of it or until the next day. I'll get to the computer in the morning and find 20 to 30 sessions open. Please help me solve this problem.
-
BlackBerry smartphones I am being hacked?
Hi all I have a BB 9360 curve. For some time, I suspect that my partner has hacked my phone because all of a sudden she knows about text messages that I received even when I am out of the country and there was no way she would have access by any othe
-
How to suspend purchases for MSN games?
I recently got a new count (portable) and why it will not down-load MSN games. I bought two games within the last week, the title appears, but there is nothing there. I would like to suspend or cancel my subscription purchase. Please tell me how t