user profile serveice impossible to log on to windows server 2008

Similar Questions

• logging on to windows server 2008

  is it possible to connect a computer laptop windows Server 2008. I want to get the server, but I need to know if it will work and if so, how?

  OK and the macbook?

  
  and if the instance of lets say, I installed a program for itunes on the computer 'A' with the user 'josh '.

  If I go to the computer 'B' and the log with "josh" will I still be able to use the program.

  and for the 3 laptops that are around the way they will connect.

  Programs (for the most part) roam with a user in an environment active directory.  A few small ones (mobile apps) could be made to do - although since then, you will need to download and upload files of each opening/closing session - there is a trade-off.  There are other things you could do with other tools to get there, though.
   
  As to the question I ask - what version of Windows 7 do you have on everything?  Is it Windows 7 Professional edition or ultimate edition (if not - you can not JOIN a domain active directory.)
   
  The macbook is possible to 'authenticate' out of the domain active directory - but he won't do all the tricks, windows systems will do.  Well enough, you get central authentication.  ;-)
   
  A computer windows laptop is no different from a windows desktop computer that Windows itself is concerned.  You may need to configure different wireless devices (so you can be connected without having to be connected) or tweak a few other things - but only because you may be using as opposed to wired wireless networks.

• The user profile service has no log on. User profile cannot be loaded

  Windows 7.  I get the message user profile service failed the log on.  User profile cannot be loaded.  I followed the instructions on the link, but it seems not to have worked.  This is the administrator account that gives me the penalty.  Only, I could get by using safe mode.  Help, please! This is a brand new with Windows 7 pre loaded, computer I did hardly anything on this computer to give me a problem like that.

  Thank you!

  Since this is a brand new computer, it would be proactive to test at least the hard disk and RAM to make sure they are good. Fleecy material can cause this problem. Just because the computer is new does not mean that the material cannot fail. Indeed, if the material is going to fail, it will usually do fairly quickly or go for years. If any material is bad, assert your warranty immediately. If the material is good, it would also be advisable to ensure that the computer is free of viruses/malware because the infection can also cause the problem.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Otherwise, this error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Satellite L450 - the user profile service failed the log on

  Hello

  I have a Toshiba Satellite L450 and I've had it for awhile now and it's never happened before, when I turn it on it goes by habit and then comes up with my name and a box for typing me my password, as usual. But when I put my password it says:
  The user profile service has no log on
  User profile cannot be loaded

  The only option I have is to disconnect and when I do it takes back me to the bit of password. If I put the password in wrong, it tells me it s wrong...
  Can t do something with it, I tried shutting down, etc. looked through the manual and can't see anything in there no more... :(

  Hi mate

  Please attach to this document from Microsoft:

  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  It seems to be the problem known to Microsoft. You use the FIX position here.

  Good luck

• The service of Windows Server 2008 SP2 user profile fails to load my profile

  the user profile service failed to load my profile in windows server 2008 sp2 Enterprise

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the 2008 Server Forums at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Move the user profile on Windows XP/Vista/7 for Windows Server 2008 R2

  We set up a Terminal Server Windows Server 2008 R2 server in a network. The plan is to move all profiles of Windows XP/Vista/7 user machines to this new server.

  Is it possible to automate the passage?
  Thank you

  This question goes a bit beyond the scope of this forum.  Here, we help Windows users having problems with files in their family environment of Windows.  Server gurus hang out in the TechNet forums, and if anyone knows a solution to your problem, they will be.

  http://social.technet.Microsoft.com/forums/en-us/categories

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• Users cannot use a smart card to log on a Server Terminal Services session on a computer that is running Windows Server 2008 R2 with SP1

  We have a Windows Server 2008 R2 with Sp1. There was the same exact problem in Windows Server 2008 (KB958596).

  When you use RDP or ICA (Citrix XenApp 6), smart card login prompt at random does not appear. When we close the RDP or ICA and make a new session of the guest of the smart card is here.

  Where can we get a fix, or a reg fix?

  Hotfix for Windows Server 2008 below...

  http://support.Microsoft.com/kb/958596

  In this scenario, users are unable to connect with their card chip and instead, he is invited for their usernames and passwords. If users don't provide these details, the Terminal Services session times out and disconnects.

  When this problem occurs, the option of smart card logon does not appear in the Terminal Services session. Users cannot connect by using their secret codes, and they must provide a user name and password. The option of smart card logon working again after that that they reconnect to the Terminal Services session one or more times

  Hello y2000max,

  Your windows server is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting among our public IT to Technet-Windows Server securityprofessionals. Thank you!

• Is there a network administrator command to display a list of users in WIndows Server 2008

  I work in a Windows Server 2008 R2 environment.  Computers are running Windows 7 proffessional addition 3 light customer ports.  I have 8 users on my license 10 users.  We continue to send a message that a user must log out before another user can log on.  This was not the case last week, but began this week only.

  How do I watch, as an administrator, which is connected from address.  All my Internet service providers are static.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  I have a setting wrong?
  I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...
  Any help would be much appreciated.

  Hi Richard,

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

  MMC.exe APPCRASH

  When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

  Problem event name: APPCRASH

  Application name: mmc.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918d 09

  Fault Module name: KseAdm.dll

  Fault Module Version: 6.0.1262.1064

  Timestamp of Module error: 49426cbb

  Exception code: c0000005

  Exception offset: 0004 849 d

  OS version: 6.0.6001.2.1.0.272.7

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• evaluation period of windows server 2008 and sql server 2008 r2 on a few 10 users?

  can I get an evaluation period for windows server 2008 standard or sql server 2008 r2 standard for on some 10 users for 1-2 months?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Impersonate user without privilege preferred to access the registry on Windows Server 2008 key/value.

  Hello

  I'm trying to impersonate another Administrators\ [an other domian user] to do some access to the registry key/value with an Administrators\ [my domain user].

  Failed with some registry access denied.

  The code is quite format.

  1. the user to logon: LogonUser (username, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, Ref token)! = 0)

  2 DuplicateToken: DuplicateToken (token, SecurityImpersonation, ref tokenDuplicate)

  3 impersonate another user:
  m_ImpersonatedUser = new WindowsIdentity (tokenDuplicate);

  using (m_ImpersonationContext = m_ImpersonatedUser.Impersonate ())

  {

  access to the registry key.

  ...
  }

  This works on Windows7 and some windows server 2008, if the new WindowsIdentity.AuthenticationType is "Kerberos", then it works, but if it's the "negotiation", it will fail.

  Can someone tell how to force the AuthenticationType to be "Kerberos"?

  Thank you.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/101ed379-ba6c-4974-BF47-c0e068515116/Server

• What "unmapped user access" for NFS share in Windows Server 2008 R2?

  In the beginning, I followed this Youtube video to set up an NFS share in Windows Server 2008 R2:

  https://www.YouTube.com/watch?v=BQ8Q_vsiksg

  Please note that the default option to allow to access Unix unmapped user is not changed (to about 1 min 57 sec).

  Then I found another article at http://www.vmwarearena.com/2012/07/create-nfs-datastore-for-esx-in-windows.html

  But in this article, I like to select allow anonymous access (instead of allow access Unix unmapped user).

  So who is correct?  Or both are correct (which means that this 'unmapped user access' is not serious)?

  And why should we have to allow root access (in the NFS share permissions dialog box)?  What a security risk?

  Thanks in advance.

  Have you tried to run through the steps taken from the blog of VMware?

  How to enable NFS on Windows 2008 and currently at ESX | Insider - Articles from VMware VMware support

  Also, there are 3 KB articles to know in case of potential problems

  1. http://kb.vmware.com/kb/1004490

  2. http://kb.vmware.com/kb/1003967

  3. http://technet.microsoft.com/en-us/library/cc753302 (WS.10) .aspx

  Noting in particular this section

  Share the folder of Windows for NFS

  To share the folder of Windows for NFS:

  1. Right click on the local folder you want to share via NFS.
  2. Click NFS share.
  3. Type the name for the share. For example, NFS-VMFS01.
  4. Delete to allow anonymous access.
  5. Click on permissions.
  6. Change the type of access in reading + writing and select allow root Access.