username changed now can't connect

Similar Questions

• password change now can not log on to windows

  Home screen has changed password required.  Asked to provide the password.  He even considered previous password a few years ago.  It wasn't.  Now can't connect to windows.

  Hello

  · What is the number and the model of the computer?

  You can check out the link below and try the steps listed: how to connect to your Windows XP-based computer if you forget your password or if your password expires on: http://support.microsoft.com/kb/321305

• Apple ID has changed now can't log on macbook - please help!

  I just changed the default email address my apple because of the problems I had with this gmail account ID. However, I really screwed up, because I forgot that I needed to separate the id of my user profile on my Macbook, now I can't connect to my macbook, even if my password is correct. What should I do? I don't know how to solve this problem.

  Any help would be greatly appreciated!

  Start here: https://support.apple.com/kb/PH21765

• connected 1 min, now can't connect

  I'm so frustrated... I have laptop Satellite.  Connected wireless 54 g very well... now, it is unconnected.

  My network before was "doodle" so I go to the networks and no "doodle" is listed as an option.

  OK, so I'll manually add, type in everything and walla "a network called doodle already exists."

  REALLY, then why is he not appear on my list of 'network '. ??  ARG

  I have never changed a thing, so why all of a sudden, I can't connect.   IF 'doodle' exists... it appears now on mine or a laptop for my daughter.   (she having the same issue)

  Why this happens, can I stop and let alone how to fix... PLEASE

  Thank you.

  Thanks for your reply binky... I wanted to update that I got it to work...

  SO weird because I am connected to the router and my SSID, (information on WEP-TKIP), and the password was changed.

  WHY, I have no idea.  good thing I copied what each item was listed as a few months because I got that info again and I connected.

  So I suggest ea person notice your settings in your router so that you know if somet; Hing changed with or without your permission.

• Cannot install complete, now can't connect

  I interrupted the download because I thought it was frozen... Now I can't connect!

  With so little information provided I can only describe what you need to do:

  Repair the hard drive or erase the disk.

  Reinstall OS X or reinstall OS X from scratch.

  When you can tell us what version of Mac OS X you are running and which version you download/install and exactly what model of MBA, you have, then maybe we can help you more.

• Passwords changed - I can not connect

  I can not connect. I'm 99.99 sure I have it correct but... How can I get in solving this problem?

  Hi ROBINBLAND,

  1. What is the message that you receive after you have entered the password?

  2. do you have security software installed on the computer?

  See the Microsoft article below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Change the id vlan of the Service Console and now can't connect

  Hello

  My ESX 3.5 server was with a Service Console PG and a PG VMotion on vSwitch0. There are 2 physical NIC assigned to the vSwitch, which are transmitted to the 2 physical network switches.

  Guys id assigned netoeking vlan 200 to 2 ports on the 2 natachasery physical switches is connected. In the VI client, if I change the properties of vSwitch0-> Console of Service and the value of the vlan 200, I completely lose connectivity to the host. I can't ping the IP address SC longer. I have a keyboard/screen connected to the host and when I connect to the SC, I can't ping the default gateway of the SC or whatever it is.

  I used esxcfg-vswitch to set of the SC vlan id 0 (all) and bingo!, I can speak to the host again and he can talk. The network guys arrure me, they put the vlan id = 200 on the OK physical switch ports. So what goes wrong?

  FWIW, we also have an ESX4 from same host configured the host to 3.5 and it communicates very well. It's the SC a vlan = 200 and issued for the same physical switches.

  George.

  the switch port config are not the same between the hosts of working and non-working.  See http://kb.vmware.com/kb/1003806 for example config

• Changed the password in British Colombia and now can't connect to Muse

  Muse and BC password must be the same, then why can't open Muse?

  I checked the account and it seems that the account is suspended for any reason any.

  Please contact customer service: https://helpx.adobe.com/creative-cloud.html

  Thank you

  Sanjit

• I've updated to fire fox and now can not connected to a webstite but I can't in other browsers...

  I've updated to fire fox and can not now connected to: https://portal.recampus.com/re/hogue-school/portal/login but I can't in other browsers...
  I make sure to check that Internet security software is up-to-date.
  Remove Firefox from your program of trust list, and then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet but no luck.
  I was ruining Firefox version 36.0 before I updated...
  Thanks for any help!

  https://www.ssllabs.com/ssltest/analyze.html?d=portal.recampus.com & hideResults = we

  The site uses TLS 1.0 (an older version of SSL), 37 as obsolete Firefox modes. It is a change of 36 of Firefox.

  You can open the topic: config page via the address bar and use the search bar to locate this pref:

  Security.TLS.insecure_fallback_hosts

  You can double-click the line to edit the prefs and add the domain to this preference.
  If there are already websites (domains) in this list, then add a comma and the new domain (without space).
  You should see fields separated by a comma in the value column.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

     http://kb.mozillazine.org/about:config
  

• I switched from DSL to broadband cable and now can only connect locally to my network... no internet connection.

  Just curious... can you ping 69.147.125.65 and get an answer (FWIW, this is
  Yahoo). Can paste you it here?
   
  Now ping www.yahoo.com and paste the result here.
   
  "SusieQ729" wrote in message news: 1844b290-4a3d-419e-b1ac-b5cee0706af1...
  > Jack, based on the fact that Z1P has verified the configuration, and we
  > have varified that I have a good internet connection and the
  > configuration is good, you are suggesting that I have clear the dns?
  >
  > No DSL software has been installed on my laptop. When I got it, I just put in place
  > the system router and configured for it and was able to get on
  > line DSL. Comcast have not installed software on my laptop or the
  > work either computer.
  >
  > As I said Z1P, I found an error in the address of the homepage on the laptop.
  > It was created with a http www.comcast.com, instead of on .net: the
  > work computer. I changed, press Apply, restarted my computer and got
  > the results "Internet Explorer cannot open the Web page."
  >
  > Any further suggestions?
  >
   
   

  Could not paste this on my other computer, so I typed it here and double checked.  Here are the results.

  C:\users\Name > ping 69.147.125.65

  Ping 69.147.125.65 with 32 bytes of data:

  Response of 69.147.125.65: bytes = 32 time = 96ms TTL = 47

  Response of 69.147.125.65: bytes = 32 time = 97ms TTL = 47

  Response of 69.147.125.65: bytes = 32 time = 94ms TTL = 47

  Response of 69.147.125.65: bytes = 32 time = 99ms TTL = 47

  Ping statistics for 69.147.125.65:

  Packets: Sent = 4, received = 4, lost = 0

  Time approximate round trip in milli-seconds:

  Minimum = 94ms, Maximum = 99ms, average = 96ms

  C:\users\Name>ping www.yahoo.com

  Ping request could not find host www.yahoo.com.  Please check the name and try again.

  Out of curiosity, I ping www.Comcast.net with these results:

  Ping www.comcast.net [68.87.66.214] with 32 bytes of data:

  Reply from 68.87.66.214: bytes = 32 time = 59ms TTL = 54

  Reply from 68.87.66.214: bytes = 32 time = 59ms TTL = 54

  Reply from 68.87.66.214: bytes = 32 time = 208ms TTL = 54

  Reply from 68.87.66.214: bytes = 32 time = 141ms TTL = 54

• Have a second hand laptop which is used as a spare at home pc. It was working OK, but now can't connect

  The laptop, I try to link with my pc at home but cannot get connected. It was work, but now do not, I have reset to factory settings and do connect the scene but now not to recognize what she asks. The security key that I typed in recently and now works when I try does not connect. What could change?

  Hello

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How to reset the Protocol Internet (TCP/IP)

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• E-mail has changed now faced with connection problems

  I changed my email address that I have changed ISP and now AppleTV constantly asking me to provide a password to get the updates and downloads.  I did everything as the basic instructions light up on the AppleTV but still have the problem because when the AppleTV is on, he puts up with the old email account.  Netflix works very well with the new email.  The AppleTV don't ask for an email address, just the password.

  Cash

  You must log out of your account on the Apple TV and then connect back with your new details.

• KB2760411, KB2760588, but now "can NOT CONNECT to" SQL Server!

  Today I faced with the same Windows Update problems as many people - with KB2760411 and KB2760588 constantly reinstall - and try to resolve which included several reboots - system
  ())

  BUT now... a serious problem on one of these machines: cannot access SQL Server!
  Fortunately, I did not run these updates on any * production * machines (I do updates on development machines, first) - this is a development machine - but I still need to get working SQL Server of this machine!

  I tried to use a Windows login to connect and tried to use a SQL Server to connect user, and what it in either, looks like the same message:
  "Cannot connect to ."
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (Microsoft SQL Server, error: 2)

  Note that for windows, this server running Server 2003 (this is why I chose the value of the drop down menu 'windows xp', below).
  and for sql server, run SQL Server 2005.

  Help!?

  ALSO NOTE: I KNOW THIS ISN'T A "NETWORK ERROR."
  because I get the same message when I remote desktop on the server and try it.
  I did try to look in the windows Server 2003 event viewer, but saw nothing relevant under the security, system or Application.

  When I tried it with a sql server login, I clicked on "Show technical details" and got the below (blank lines removed and replaced with the name of the server):

  ===================================
  Unable to connect to .
  ===================================
  A network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server) (.Net SqlClient data provider)
  ------------------------------
  For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
  ------------------------------
  Error number: 2
  Severity: 20
  State: 0
  ------------------------------
  Location of the program:
  at System.Data.SqlClient.SqlInternalConnection.OnError (SqlException exception, Boolean breakConnection)
  at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning (TdsParserStateObject stateObj)
  to System.Data.SqlClient.TdsParser.Connect (ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean ignoreSniOpenTimeout, encrypt Boolean trustServerCert, Boolean, Boolean integratedSecurity, SqlConnection owningObject)
  to System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin (ServerInfo serverInfo, String newPassword, ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject, Boolean)
  at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover (String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist (SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
  to System.Data.SqlClient.SqlInternalConnectionTds... ctor (DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
  at System.Data.SqlClient.SqlConnectionFactory.CreateConnection (DbConnectionOptions options Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection (DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
  at System.Data.ProviderBase.DbConnectionFactory.GetConnection (DbConnection owningConnection)
  at System.Data.ProviderBase.DbConnectionClosed.OpenConnection (DbConnection outerConnection, DbConnectionFactory connectionFactory)
  at System.Data.SqlClient.SqlConnection.Open)
  to Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection (UIConnectionInfo above, IServerType server)
  at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser)

  Thanks Nirmal for the acknowledgement of receipt.

  As you can see, we ended up find us the answer.
  (BOWL is not same document how to grant "Log on as a service", under Server 2008 R2, WHEN ON THE DOMAIN CONTROLLER.)  BOWL documents which fully Server 2003, but only partially for Server 2008 R2.)

  But we are not given the opportunity to "mark as answer" on our own solution.
  If YOU think that the INFORMATION we posted had value, YOU may mark as answer.

  The TechNet link:
  Unable to connect to SQL Server... (includes advice in response: measures to grant permissions in Active Directory, the domain server * RUNNING SERVER 2008 R2 *).

  Thanks again.

• Reinstalled XP, now can't connect to internet via modem/router

  With regard to the discussion:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/reinstalled-XP-now-cant-connect-to-Internet/2e02ecad-4C19-4CB6-8e48-fc89dd92c487?page=1&TM=1303073424554

  BVSMITH,

  I have the same problem as you did.  Did you find the drivers on the xp installation cd?  I have tried and may not consider the content of the cd, all is well in the list, allowing you to install.

  Any additional help by anyone would be appreciated.

  Tim

  Hello

  · You receive an error message or error code when you try to access the internet?

  · What is the number and the model of the computer?

  1. check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, search the map network drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

  You can also check: how to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

• CSS crashed and now can't connect to all T30/XP (?)