Usernames easy VPN and Ganymede +.
Dear all,
It's on with Ganymede and easy VPN user connections.
According to the current configuration, we use local connections configured on the router to allow remote vpn users to connect it.
Now, we want to use Ganymede + to authenticate users for their accounts.
So please give me an example of configuration, a doc or a link for reference.
Eve.
Hi Moinahadidja,
in case you still need help with this, here is an example:
http://www.Cisco.com/en/us/Tech/tk59/technologies_configuration_example09186a00800a393b.shtml
HTH
Herbert
Tags: Cisco Security
Similar Questions
-
Easy VPN - excluded network list
List of excluded network seems not valid for customers of material.
I have to site vpn to the other side being dynamic ip would be and tunnel of everything, except a single destination. I am not able to find any information on this... I can configure easy vpn and get all tunnel but I need to exclude a certain destination
In the acl and acl split tunnel No. - nat, you can add to the very first lines to deny the excluded subnets or ip hosts that you do not want to go through the tunnel and allow all ip ranges 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16.
Have you tried this method?
Thank you
Rizwan James
-
Can I connect a PC with easy vpn client with a vpn service module 6500?
Are there examples in the Web?
Take a look at the following link as there some configuration examples that should help you.
http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat6000/cfgnotes/78_14459.htm
-
Cisco easy VPN + loopback interface. static ip address for the client
Good day people.
I have a couple a question and answer on which I can't google for a period. BTW I maybe simly use bad aproach to choose keywords.
Thus,.
(1) is it possible to assign the same IP to the same customer every time that it authenticated, preferably without using DHCP? Definely im sure it is possible, but can't find match configuration examples (my camera's 1921 Cisco IOS 15.0.1).
(2) is it possible to assign the dynamic crypto map to the loopback interface (to make EASY VPN Server accessible through two interfaces - maybe you recommend another approach instead?) - that I move the map workingcrypto of int phy loopback - I can not connect with reason "SA Phace1 policy proposal" not accepted
Hello
(1) you can attach to the same IP to the same username using RADIUS
(2) If you have 2 outside interfaces
Then, you would use
mymap-address loop0 crypto card
int gig0/0
crypto mymap map
int g0/1
cryptp map mymap
By doing so, the local address would actually be the loop0 but Cryptography card HAS to be applied on physical output interfaces
See you soon
OLivier
-
IOS Easy VPN Server / Radius attributes
Hello
I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.
It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.
The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.
How can I solve this problem?
You will find the relevant parts of the configuration and a RADIUS "deb" below.
Kind regards
Christian
AAA - password password:
AAA authentication calls username username:
RADIUS AAA authentication login local users group
RADIUS AAA authorization network default local group
crypto ISAKMP policy 1
Group 2
!
crypto ISAKMP policy 3
md5 hash
preshared authentication
Group 2
ISAKMP crypto identity hostname
!
ISAKMP crypto client configuration group kh_vpn
mypreshared key
pool mypool
!
Crypto ipsec transform-set esp-3des esp-sha-hmac shades
!
mode crypto dynamic-map 1
shades of transform-set Set
!
users list card crypto mode client authentication
card crypto isakmp authorization list by default mode
card crypto client mode configuration address respond
dynamic mode 1-isakmp ipsec crypto map mode
!
interface FastEthernet0/1
IP 192.168.100.41 255.255.255.248
crypto map mode
!
IP local pool mypool 172.16.0.2 172.16.0.10!
Server RADIUS attribute 8 include-in-access-req
RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX
RADIUS server authorization allowed missing Type of service
deb RADIUS #.
00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a
DDR = 192.168.100.26
00:03:28: RADIUS: ustruct sharecount = 2
00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1
00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.
4, len 73
00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96
68
00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26
00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]
00:03:28: RADIUS: username [1] 10 "vpnuser1".
00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".
00:03:28: RADIUS: User-Password [2] 18 *.
00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l
in 108
00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6
A4
00:03:28: RADIUS: Type of Service [6] 6 leavers [5]
00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255
00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
00:03:28: RADIUS: Tunnel-Password [69] 21 *.
00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0
00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5
00:03:28: RADIUS: [25] the class 37
00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0
000010]
00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F
/vpnus]
00:03:28: RADIUS: 65 72 31 [1]
00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data
00:03:29: RADIUS: authentication for data of the author
00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a
DDR = 192.168.100.26
00:03:29: RADIUS: ustruct sharecount = 3
00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1
00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.
5, len 77
00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60
E3
00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26
00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]
00:03:29: RADIUS: username [1] 8 'kh_vpn '.
00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".
00:03:29: RADIUS: User-Password [2] 18 *.
00:03:29: RADIUS: Type of Service [6] 6 leavers [5]
00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l
in 94
00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23
AF
00:03:29: RADIUS: Type of Service [6] 6 leavers [5]
00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255
00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
00:03:29: RADIUS: Tunnel-Password [69] 21 *.
00:03:29: RADIUS: [25] class 35
00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0
000010]
00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a
[/ kh_vp]
00:03:29: RADIUS: 6 [n]
00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data
Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.
On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.
Yes, messy, but just try to provide a solution for you.
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
-
Easy VPN setup with interface to multiples with the same level of security
Hello
I want to configure an ASA 5505 with 7.2 (4) software and dual license ISP and when I configure two interfaces with the level 0 on two security interfaces and enable vpnclient the trace message appear:
ERROR: Cannot determine the internal and external interfaces Easy VPN remote: multiple interfaces with the same levels of security.
vpnlclient of configuration above:
vpnclient Server x.x.x.x where x.x.x.x
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
vpnclient TUNNEL_EZVPN_TUNNELSPEC vpngroup password *.
vpnclient username usr_ezvpn_tunnelspec password *.
vpnclient enableinterfaces:
interface Vlan200
nameif outside1
security-level 0
IP x.x.x.x 255.255.255.252
!
interface Vlan300
nameif outside2
security-level 1
IP x.x.x.x 255.255.255.128
!monitor the SLA to the routing:
monitor SLA 100
type echo protocol ipIcmpEcho 200.221.2.45 interface outside1
NUM-package of 5
frequency 30
monitor als 100 calendar life never start-time now
ALS 200 monitor
type echo protocol ipIcmpEcho 200.154.56.80 interface outside2
NUM-package of 5
frequency 30
Annex monitor SLA 200 life never start-time now
ALS 300 monitor
type echo protocol ipIcmpEcho 4.2.2.1 interface outside1
NUM-package of 5
frequency 30
Annex monitor SLA 300 life never start-time now
ALS 400 monitor
type echo protocol ipIcmpEcho 200.244.168.149 interface outside1
NUM-package of 5
Timeout 3000
threshold of 3000
frequency 30
Annex monitor SLA 400 life never start-time nowFollow-up:
!
track 1 rtr 400 accessibility
!
Track 2 rtr 200 accessibility
!routes:
Route 0.0.0.0 outside1 0.0.0.0 x.x.x.x 100 track 1
Route 0.0.0.0 outside2 0.0.0.0 x.x.x.x 200 track 2The track works normal.
Kind regards!
Try using the command "backup interface" on the secondary ISP interface.
http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/b_72.html#wp1338585
You need to increase the level of security to 1 for this interface.
By default, EasyVPN uses the highest level of safety inside and the lowest outside. Anything between the two must be set manually. I assume you have an interior vlan defined but not added to the posted config.
-
Hello
There is an "acl" parameter that is not clear to me, it is configured at customer site:
Crypto ipsec VPN ezvpn client
connect auto
Cisco key band EASYVPN
client mode
peer 10.0.0.1
username cisco password cisco
xauth userid local mode
ACL 101
Everything that I added to the ACL 101 tunnel is always present. I found a description:
Step 6
ACL {name - acl |} ACL-number}
Example:Device (ezvpn-crypto-config) # acl acl-list1
Specifies several subnets in a VPN tunnel.
"Specifies several subnets in a VPN tunnel". -what it means, source?
I tried to use this setting, and I added the access list:
access-list 123 allow ip 10.10.10.0 0.0.0.255 host 20.0.0.20
access-list 123 allow ip 50.50.50.0 0.0.0.255 host 20.0.0.20
where 10.10.10.0 and 50.50.50.0 are source and 20.0.0.20 is the destination.
When I ping with source 10.10.10.3 (physical int) for 20.0.0.20 - numbers of BA & desc packages grows.
but when I ping with source 50.50.50.50 (int loop) for 20.0.0.20 - I see that it wasn't to push into the tunnel.
Could someone explain how the work parameter and for what is it?
Thank you
Hubert
Hubert,
Ref:
in client mode several subnets are not supported, nor what they sense.
You specify what internal subnets of announcement to the server that are configured behind this device.
In client mode, the server sees only the assigned IP address.
M.
-
Hello all.
I'm putting in place an easy VPN between a router connection, 2811 and year 887. I'm getting a few errors which I can't solve. Your help with this would be greatly appreciated
They are set up as follows, with the intention that the 887 can be put in a home user, connected to their generic router DSL and provide connectivity in the enterprise. In this configuration, it is a 877, but the intention is that the configuration of this device should not be set.
NAT firewall external IP to the 10.228.156.33 address present on R3
Trying to connect to R1 R3, but returns the error
08:48:42.905 11 Oct: % CRYPTO-4-EZVPN_FAILED_TO_CONNECT: EZVPN (Remote) Ezvpn is in the READY State, the previous status was CONNECT_REQUIRED and event is CONN_UP. Session is not after 180 seconds of login, the connection reset
08:48:42.905 11 Oct: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = group = GroupName Client_public_addr = 172.17.4.43 Server_public_addr = 1.2.3.4
and a sh crypto isakmp sa, indicates a connection R3, but it happens to expire after 180 seconds
R3 displayed a route to 10.153.100.0/24 via f0/1, but not HIS R1 fo
User names, passwords and keys are correct, but removed the configs below
Thanks for your help
Config of R1
router host name
!
boot-start-marker
boot-end-marker
!
!
Select the secret xxxx!
No aaa new-model
Crypto pki token removal timeout default 0
!
!
IP source-route
IP cef
!
!
!
!
client IP dhcp pool
Network 10.153.100.0 255.255.255.0
router by default - 10.153.100.1
10.203.2.10 DNS server
!
!
No ipv6 cef
!
!
license udi pid C887VA-W-E-K9 sn xxxxx!
!
username privilege 15 password 0 xxxxx xxxx
!
!
!
!
VDSL controller 0
!
!
!
!
!
Crypto ipsec client ezvpn remote control
connect auto
Group groupname key xxxxxx
network extension mode
1.2.3.4 xauth userid interactive Peer mode
!
!
!
!
!
ATM0 interface
no ip address
Shutdown
No atm ilmi-keepalive
!
interface Ethernet0
no ip address
Shutdown
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
switchport access vlan 2
no ip address
!
interface FastEthernet2
switchport access vlan 2
no ip address
!
interface FastEthernet3
switchport access vlan 2
no ip address!
interface Vlan1
DHCP IP address
Crypto ipsec client ezvpn remote control
!
interface Vlan2
IP 10.153.100.1 255.255.255.0
Crypto ipsec client ezvpn remote inside
!
IP forward-Protocol ND
IP http server
no ip http secure server
!
enable IP pim Bennett
IP route xxxxx 255.255.255.255 Vlan1
!
not run cdp
!
!
!
!
!
Line con 0
exec-timeout 0 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
StopBits 1
line vty 0 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
endR3 #.
no password encryption service
!
hostname R3
!
boot-start-marker
boot-end-marker
!
Select the secret xxxxx
!
AAA new-model
!
!
local VPN_xauth AAA authentication login
local VPN_group AAA authorization network
!
AAA - the id of the joint session
!
!
IP cef
!
!
voice-card 0
No dspfarm
!
username privilege 15 password: xxxx xxxx
Archives
The config log
hidekeys
!
!
!
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group groupname
key xxxxx
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto ipsec remote access profile
!
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
!
list of authentication of card crypto clientmap client VPN_xauth
card crypto clientmap VPN_group isakmp authorization list
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
!
!
!
interface FastEthernet0/0
IP 10.203.4.33 255.255.255.0
automatic duplex
automatic speed
!
interface FastEthernet0/1
IP 10.228.156.33 255.255.255.0
full duplex
Speed 100
clientmap card crypto
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 10.228.156.254
IP route 10.0.0.0 255.0.0.0 10.203.4.254
!
!
IP http server
no ip http secure server
!
!
Line con 0
line to 0
line vty 0 4
exec-timeout 360 0
password xxxx
!
Scheduler allocate 20000 1000
!
end
Hello geoff,
Found something...
on the R1, the peer is configured as 193.128.190.33 but that IP is not set in R3 is natted on firewall? If so, we allowed the udp port 4500 to this ip address?
concerning
Harish
-
PlayBook &; cisco Easy VPN Server 831
I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook. Looking at the console of the router I can see Debugging but don't know what it means. I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated. Thank you very much.
Current configuration: 2574 bytes
!
version 12.3
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
enable password xxxx
!
username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
AAA - the id of the joint session
IP subnet zero
no ip Routing
!
!
audit of IP notify Journal
Max-events of po verification IP 100
No ftp server enable write
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP xauth timeout 15 crypto!
ISAKMP crypto client configuration group ciscogroup
(deleted) 0 key
DNS 172.16.60.246 172.16.60.237
pool SDM_POOL_3
ACL 100
Save-password
include-local-lan
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
crypto dynamic-map SDM_DYNMAP_1 1
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
!
!
!
interface Ethernet0
IP 172.16.60.241 255.255.255.0
IP nat inside
no ip route cache
!
interface Ethernet1
DHCP IP address
NAT outside IP
no ip route cache
automatic duplex
map SDM_CMAP_1 crypto
!
interface FastEthernet1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet2
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet3
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet4
no ip address
automatic duplex
automatic speed
!
local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
IP classless
!
IP http server
no ip http secure server
!
Remark SDM_ACL category of access list 1 = 2
access-list 1 permit 172.16.60.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 172.16.60.0 0.0.0.255 any
public RO SNMP-server community
Enable SNMP-Server intercepts ATS
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
exec-timeout 120 0
password xxxxx
length 0
!
max-task-time 5000 Planner
!
endStace,
*Mar 1 06:40:15.258: ISAKMP: transform 1, ESP_AES
*Mar 1 06:40:15.258: ISAKMP: attributes in transform:
*Mar 1 06:40:15.262: ISAKMP: SA life type in seconds
*Mar 1 06:40:15.262: ISAKMP: SA life duration (basic) of 10800
*Mar 1 06:40:15.262: ISAKMP: encaps is 61443
*Mar 1 06:40:15.262: ISAKMP: key length is 256
*Mar 1 06:40:15.262: ISAKMP: authenticator is HMAC-SHA
*Mar 1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
*Mar 1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
*Mar 1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
The other end offers AES 256 and SHA IPSec transform set.
While you have configured:
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
Suggestion:
Add a new set of transofrm and apply it under crypto map.
HTH,
Marcin
-
Help with the easy VPN server with LDAP
Hello
I used to be able to set up our easy VPN server with local authentication.
But now, I'm trying to use LDAP authentication to match with our policies.
Can someone help me please to check the config and tell me what is wrong with him?
My router is a Cisco1941/K9.
Thank you in advance.
Ryan
Current configuration: 5128 bytes
!
! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
version 15.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
!
AAA new-model
!
!
AAA group ASIA-LDAP ldap server
Server server1.domain.net
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
local VPN_Cisco AAA authorization network
Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
!
!
!
!
!
IP domain name domaine.net
IP cef
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-765105936
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 765105936
revocation checking no
rsakeypair TP-self-signed-765105936
!
!
TP-self-signed-765105936 crypto pki certificate chain
certificate self-signed 01
30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
3AF09B1E 243EA5ED 7E4C30B9 3A
quit smoking
license udi pid CISCO1941/K9 sn xxxxxxxxxxxISM HW-module 0
!
!
!
secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
ryan privilege 0 0 pass1234 password username
!
redundancy
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPN_Group1
xxxxxxxxxxxx key
DNS 10.127.8.20
pool SDM_POOL_1
ACL 100
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPN_Group1
authentication of LDAP-ASIA-AUTHENTIC customer list
whitelist ISAKMP ASIA-LDAP-authorization of THE
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
!
interface Loopback0
IP 10.127.15.1 255.255.255.0
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP xxx.xxx.xxx.xxx 255.255.255.224
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
IP 10.127.31.26 255.255.255.252
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
IP forward-Protocol ND
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
IP route 10.0.0.0 255.0.0.0 10.127.31.25
IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
!
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
!
!
!
!
!
!
!
LDAP attribute-map ASIA-username-map
user name of card type sAMAccountName
!
Server1.domain.NET LDAP server
IPv4 10.127.8.20
map attribute username-ASIA-map
bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
DC = domain, DC = net password password1
base-dn DC = domain, DC = net
bind authentication-first
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line 67
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport telnet entry
!
Scheduler allocate 20000 1000
endRouter #.
Ryan,
It seems that you are facing the question where it is indicated in the section:
Problems with the help of "authentication bind first" with user-defined attribute maps:
* Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49. The newspapers will look something like the journals below: *.
Which is the same error you see. Go ahead and replace in your attribute map and test again.
If you remove the command "bind-first authentication' configuration above, everything will work correctly.
https://supportforums.Cisco.com/docs/doc-17780
Tarik Admani
* Please note the useful messages *. -
CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION
Hello
I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match? Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.
Please see my full configuration:
Router #sh run
Building configuration...Current configuration: 8150 bytes
!
! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Passwords security min-length 6
no set record in buffered memory
enable secret 5 xxxxxxxxxxx
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
IP source-route
no ip free-arps
IP cef
!
Xxxxxxxxx name server IP
IP server name yyyyyyyyy
!
Authenticated MultiLink bundle-name Panel
!parameter-map local urlfpolicy TSQ-URL-FILTER type
offshore alert
block-page message "Blocked according to policy"
parameter-card type urlf-glob FACEBOOK
model facebook.com
model *. Facebook.comparameter-card type urlf-glob YOUTUBE
mires of youtube.com
model *. YouTube.comparameter-card type urlf-glob CRICKET
model espncricinfo.com
model *. espncricinfo.comparameter-card type urlf-glob CRICKET1
webcric.com model
model *. webcric.comparameter-card type urlf-glob YAHOO
model *. Yahoo.com
model yapoparameter-card type urlf-glob PERMITTEDSITES
model *.parameter-card type urlf-glob HOTMAIL
model hotmail.com
model *. Hotmail.comCrypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-2049533683
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2049533683
revocation checking no
rsakeypair TP-self-signed-2049533683
!
Crypto pki trustpoint tti
crl revocation checking
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
name of the object [email protected] / * /
crl revocation checking
!
!
TP-self-signed-4966226213 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332quit smoking
encryption pki certificate chain tti
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO1905/K9 sn xxxxxx
licence start-up module c1900 technology-package datak9
username privilege 15 password 0 xxxxx xxxxxxx
!
redundancy
!
!
!
!
!
type of class-card inspect entire tsq-inspection-traffic game
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
match Protocol l2tp
class-card type match - all BLOCKEDSITES urlfilter
Server-domain urlf-glob FACEBOOK game
Server-domain urlf-glob YOUTUBE game
CRICKET urlf-glob-domain of the server match
game server-domain urlf-glob CRICKET1
game server-domain urlf-glob HOTMAIL
class-map type urlfilter match - all PERMITTEDSITES
Server-domain urlf-glob PERMITTEDSITES match
inspect the class-map match tsq-insp-traffic type
corresponds to the class-map tsq-inspection-traffic
type of class-card inspect correspondence tsq-http
http protocol game
type of class-card inspect all match tsq-icmp
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence tsq-invalid-src
game group-access 100
type of class-card inspect correspondence tsq-icmp-access
corresponds to the class-map tsq-icmp
!
!
type of policy-card inspect urlfilter TSQBLOCKEDSITES
class type urlfilter BLOCKEDSITES
Journal
reset
class type urlfilter PERMITTEDSITES
allow
Journal
type of policy-card inspect SELF - AUX-OUT-policy
class type inspect tsq-icmp-access
inspect
class class by default
Pass
policy-card type check IN and OUT - POLICIES
class type inspect tsq-invalid-src
Drop newspaper
class type inspect tsq-http
inspect
service-policy urlfilter TSQBLOCKEDSITES
class type inspect tsq-insp-traffic
inspect
class class by default
drop
policy-card type check OUT IN-POLICY
class class by default
drop
!
area inside security
security of the OUTSIDE area
source of security OUT-OF-IN zone-pair outside the destination inside
type of service-strategy check OUT IN-POLICY
zone-pair IN-to-OUT DOMESTIC destination outside source security
type of service-strategy inspect IN and OUT - POLICIES
security of the FREE-to-OUT source destination free outdoors pair box
type of service-strategy inspect SELF - AUX-OUT-policy
!
Crypto ctcp port 10000
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 2
Group 2
!
ISAKMP crypto client configuration group vpntunnel
XXXXXXX key
pool SDM_POOL_1
include-local-lan
10 Max-users
ISAKMP crypto ciscocp-ike-profile-1 profile
vpntunnel group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-TRANSFORMATION TSQ
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
!
interface GigabitEthernet0/0
Description LAN INTERFACE-FW-INSIDE
IP 172.17.0.71 255.255.0.0
IP nat inside
IP virtual-reassembly in
security of the inside members area
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Description WAN-INTERNET-INTERNET-FW-OUTSIDE
IP address xxxxxx yyyyyyy
NAT outside IP
IP virtual-reassembly in
security of the OUTSIDE member area
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
no fair queue
2000000 clock frequency
!
type of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP nat inside source list 1 interface GigabitEthernet0/1 overload
IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
IP route 192.168.1.0 255.255.255.0 172.17.0.6
IP route 192.168.4.0 255.255.255.0 172.17.0.6
!
access-list 1 permit 172.17.0.0 0.0.255.255
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip yyyyyy yyyyyy everything
!
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport input ssh rlogin
!
Scheduler allocate 20000 1000
endA few things to change:
(1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.
(2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:
access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255
access-list 120 allow ip 172.17.0.0 0.0.255.255 everything
overload of IP nat inside source list 120 interface GigabitEthernet0/1
No inside source list 1 interface GigabitEthernet0/1 ip nat overload
(3) OUT POLICY need to include VPN traffic:
access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255
type of class-card inspect correspondence vpn-access
game group-access 121
policy-card type check OUT IN-POLICY
vpn-access class
inspect
-
I have a router 2611 with ios:c2600 - I - mz.120 - 10, DRAM/FLASH is 26624 K / 6144 K
and the compact flash is 4966520.
It would support the easy vpn remote feature? If this isn't the case, what IOS/DRAM/FLASH might be appropriate?
Hello
Use feature Navigator find IOS appropriate for different platforms:
http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp
HTH
Sangaré
-
Cannot access the internal network with Cisco easy vpn client RV320
I have a cisco RV320 (firmware v1.1.1.06) and created a tunnel easy vpn (= split tunnel tunnel mode), then I installed the cisco client vpn v5.0.07.0290 in Windows 7 64 bit, I can connect to the vpn, but I do not see the other pc ping nor them, no idea?
Thank you
Hello
1. is the firewall on the active Windows 7 computer? If so, please disable it
2. can you check that you get a correct IP address in the range of the POOL of IP configured?
3. When you perform the tracert command to access an internal server, it crosses the VPN¨?
4. is the tunnel of split giving you access to internal IP subnets defined?
5. on the RV320 you see the user connected and sending and receiving bytes?
Don t forget to rate and score as correct the helpful post!
David Castro,
Kind regards
-
With an interface easy VPN client only
Hi guys,.
I have an ASA 5505 configuration as simple Client VPN. Current configuration uses two interfaces: inside and outside. I tested the connection to the server and works very well.
For reasons of site specific I'm limited to a single interface, you can call it inside, lan, whatever. So I need to connect clients to the remote site behind this interface and also use it to reach the easy VPN server. Is it possible in the first place?
Of course, I will put the default route through the Interior of interface and another router will provide the Internet connection.
It's so hard to make it work you should consider the answer is no.
Specifically, you need to have one inside and outside interface or EasyVPN will not come to the top.
Maybe you are looking for
-
Skype for Mobile sound for Skype Desktop.
Are there opportunities that we receive the sounds of Skype mobile on Desktop Skype? I like them more.
-
7 d Mark II with a teleconverter 1.4 x - WOO HOO!
So, just a few weeks ago, I found myself in an interesting position - let me explain. I had a 60 d that I loved for the past 3 years. But... I have a 100-400 f4 - 5.6 L that I also like. BUT I'm also a 1.4 x teleconverter I sometimes still add the
-
I had no idea what was going on with my hotmail. I understand now that my account had been hacked, or something like that had happened to her. I finally return to hotmail with a different account, but I lost all my contacts. I found a couple of the
-
automatic switch to the process manaual
How to pass the "Automatic" process to these "procedures" so that the service is enabled only when I click it?
-
With disabilities in the computer battery notification.
My Dell Inspiron (64-bit-Win 7) is still on the adapter CA but after defragmentation, a warning popped up ""battery is temporarily disabled. " Turn off the computer and wait until cools up to the operating temperature. "After several hours off the co