Users of Max GBA 5.1?
Anyone happen to know the number of maximum number of users that can contain the ACS 5.1? Data sheets do not seem to have a clear answer, for I'm too disabled mentally to find.
I'm doing the call of the storage of users in an ad, or GBA, I have about 900 with strong growth potential.
EI
I can't find solid guarantees, but I heard the number is 300000 and the product has certainly been tested with moer than 100000 users in the internal database
Tags: Cisco Security
Similar Questions
-
Unable to connect wireless, "ACS user exceeded max sessions" users
Some corporate users are unable to connect to the wireless company.
On the WLC, I get the following logs:
Authentication failure AAA for UserName:dto029 user Type: USER WLAN
The GBA, I get the error:
Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......
That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.
Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124
The problem is solved the ACS is restarted. Is there a permanent solution?
Thanks in advance.
Hello
the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:
.. and the user exceeds this limit.
ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.
ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.
You can check the active sessions on the "users" ACS report:
If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :
-do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration
-If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.
HTH,
Federico
--
If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.
-
Forms user session 11 GR 2 Max
Hello
I have three simple questions, can anyone help me find the answers.
What is the user session max for the version of oracle forms 11.1.2.1?
If the limit of user sessions max achieved how can we treat them?
How can I me user session max for version forms 11.1.2.1 through sql code?
Thank you!
Badio. S
What user access in a web forms application, a user of forms logon will be visible in OEM.
So you can see how many forms user sessions is here at any time.
You can get this information at the level of the OS, using the «opmnctl» order status
My question is how many simultaneous users can access oracle forms 11.2.1.1 application via web at the same time?
Is there a limit?
You can set it in the formsapp management console, the default value is - 1, which means unlimited.
-
Lightness of Max User Interface
Hello
I am a teacher of After Effects. For video projection, my students prefer an interface with more brightness.
In the preferences affecting the appearance, maximum brightness is too low.
I try to change the preferences file. I found that these lines:
"User Interface Max dark percent" = "70".
"User Interface Max weight per cent" = "50".
(in Adobe After Effects 13.2 Prefs.txt)
and
"User Interface brightness (4) [0.0.1.0]" = "0.000000".
(in Adobe After Effects Prefs 13.2-indep - general.txt)
I did several tests but it does not work.
It is impossible to change the brightness by editing the preferences file?
Thank you
Bruno, we intend to add more personalization to the brightness of the user interface elements in a release scheduled for this spring.
-
How to 'book' an Ethernet cDAQ chassis based in software without using MAX?
I am using a cDAQ 9188 with Ethernet interface. It works fine, but the Setup is a little more than I like for end-users. Users are all first go to MAX and do make a connection. After that, users must 'reserve' the chassis to ensure access to it. This isn't a problem except that I still have to find a way to make the code G. I have rather not in my documentation would include a series of steps require that the user enter MAX whenever they want to turn on the system. I would have preferred it is comparable to a USB DAQ experience where it works.
All the examples there or suggest on properties, methods or screws to use for my situation?
You'll want to use the DAQmx reserve Network Device.vi, under measures of e / s-> DAQmx--> DAQmx advanced-> configuration of the data acquisition system.
-
NI-CAN 2.6.3: MAX UI Language
I installed NI-CAN 2.6.3 (MAX 4.6.0f1) on Japanese Windows XP (SP3), for use with my NI USB-8473/8472 modules. I have no control over the language of the OS, but I absolutely have to get interface user of MAX to display in English, not Japanese. When I install NI-CAN on an English edition of Windows XP, the MAX UI displays well in English. This proves that the MAX's user interface is related to the language of the OS. But I need a work around for this so I can get the MAX to display all the text in the user interface in English, even if the version of Windows XP is Japanese.
How can I accomplish this?
Thank you.
Hi JDW1,
If you go into Control Panel"regional and Language Options, you will get three tabs. In Regional Options change the first option English (United States). On the languages tab, select Details and change the default input for English (United States) language. In the Advanced tab, select English (United States) for the non-Unicode programs. After having changed all three of these features, you should be able to see MAX in English.
-
Create a table based on Max and Min
Hello
I found a thread fairly similar, but he has not answered my question.
I'm building a Vi that simulates a cyclone running at high volumes of different admission. I need to generate a series of volumes of admission based on a user of max, min and interval/step input. These data must be used for the calculations and the x scale of a chart. What is the best way to do it? I could have the user specify each data point, but that only works if the user wants to only like 10 data points. I need to be able to say, start at 0 and 1 to 900. I know how to do this in matlab, but I can't understand it in labview.
Thanks in advance for any advice.
It's still there. Even back in LabVIEW 7.1, the range of functions had a search capability. Have you tried it?
7.1 if you want as the inputs to be the stage of start-up/stop/then you can do something like this (the ramp model VI icon will be different for 7.1):
-
Can we use the two Min max and MRP element
HelloWe can user Min max and the MRP of planning for the element in the same Org (11.5.10.2)
Thanks in advance
Ravi
Hi Ravi,
There are no restrictions such as a... but it would be an unnecessary activity.
If your release to users even planned orders by mistake... you would create duplicate supplies.
Is there any need specific job for which you want to use both of these methods of planning as a whole?
Kind regards
Mohan Balaji
-
by selecting the max value of the rank function.
Hi I have the following querry on the table use:
Select user_id, e-mail,
Rank() (PARTITION BY Email order by user_id) AS rank_l
of users_tab;
It gives me the result as follows:
user_id E-mail rank_l
1 1 [email protected]
2 2 [email protected]
3 [email protected] 1
4 [email protected] 2
5 [email protected] 1
6 [email protected] 2
7 [email protected] 3
I need to select the user rank max id from the result set.
in this case, the result should I get is:
user_id E-mail rank_l
2 2 [email protected]
4 [email protected] 2
7 [email protected] 3
Help, please?Hello
The "with" clause is only for the purppose test, use your own data. The solution is in the OLAP NTH_value function.
select distinct nth_value(user_id,1) over (partition by email order by user_id desc) as id, nth_value(email,1) over (partition by email order by user_id desc) as email from users_tab order by 1
It works with your own data?
Kind regards.
-
Re: How to get Max (all values of columns) records on a partition interval
Hello
We have table as above, IE. everyday, there are records at regular intervals of hours for different users.Hours Days Name used_size 1 01-09-012 R1 1100 10 01-09-012 R1 1150 15 01-09-012 R1 1160 23 01-09-012 R1 1200 1 01-08-012 R1 1600 10 01-08-012 R1 1700 15 01-08-012 R1 1800 23 01-08-012 R1 1500 1 01-09-012 J1 10 10 01-09-012 J1 20 15 01-09-012 J1 30 23 01-09-012 J1 60 1 01-08-012 J1 70 10 01-08-012 J1 5 15 01-08-012 J1 17 23 01-08-012 J1 22 Needed o/p: 23 01-09-012 R1 1200 23 01-08-012 R1 1500 23 01-09-012 J1 60 23 01-08-012 J1 22
I want to get a single record of every day for one hour on this day for all users.
Please let me know if my question was unclear?
-Thank youAnother way, maybe more simple here, here could be just group by user, day.
SELECT user, day, Max(hours) max_hours, Max (used_size) KEEP (DENSE_RANK LAST ORDER BY hours) mh_used_size FROM (table) GROUP BY user, day ORDER BY user, day
-
1000V VSM lossing contact VEM after vMotion
Hello
We have installed 1000v VSMs as virtual machines on a Server Blade HP virtual connect modules.
This worked well and we migrated most of the VMS to 1000v. Same HA between the primary and backup VSMs worked.
Now, we see that if you live migrate the active MSM is loses all contact with the MEC, but backup VSM is supported unless you turn off an asset, the same thing happens when clients trend Deep Security Manager did some update to the VSM VM.
We have the 1000v deployed in L3 mode with the help of control interface and the MEC have their own vmkernel IP address, which in this case is on the same IP subnet as the VSM control interface.
We control 1000v VSM interface and management interface configured as a system of VLAN
1000V version 1,0000 sv2 (2.1) on VMware 5.1
Any ideas? This kind of thing is usually a number system VLAN.
News config below.
Thank you
Pat
VLAN 60
name mgmt<--- ssh="" to="" vsm="">--->
VLAN 66
name VEM-mgmt<-- vsm="" to="">-->
profile port vethernet n1kv_NEXUS_L3_CONTROL type
capacity l3control
VMware-port group
switchport mode access
switchport access vlan 66
no downtime
System vlan 66
enabled state
profile port vethernet n1kv_VLAN60 type
VMware-port group
switchport mode access
switchport access vlan 60
no downtime
System vlan 60
enabled state
profile n1kv_UPLINK ethernet port type
VMware-port group
switchport mode trunk
switchport trunk allowed vlan 4,7,9,18,54,57-66,68,71,94-95
type of service-policy output queuing uplink-policy-map
Automatic channel-group on mac - pinning parent
no downtime
System vlan 60,66
Max-port 32
enabled state
SVS-field
domain ID 10
check the vlan 1
package vlan 1
mode of SVS L3 interface control0
SVS connection vcenter
Protocol vmware-vim
Remote ip address 172.30.60.10 port 80
VMware dvs uuid "f7 29 21 50 82 15 50 7f - 52 20 2d 6 c f1 6 d 89 a7" datacenter-name Gatwick
n1kUser admin user
Max-ports 30000
connect
What follows is his work when:
Show dom svs
SVS config domain:
Domain ID: 10
Check the vlan: NA
Package vlan: NA
Command mode of L2/L3: L3
L3 control interface: control0
Status: Config push successful VC.
Control type multicast: No.
Show con svs
vcenter to connect:
IP address: 172.30.60.10
remote port: 80
Protocol: vmware-vim https
certificate: by default
datacenter name: Gatwick
Admin: n1kUser (user)
Max ports: 30000
DVS uuid: f7 29 21 50 82 15 50 7f - 52 20 2d 6 c f1 6 d 89 a7
config status: enabled
operational status: connected
Sync status: complete
version: VMware vCenter Server 5.1.0 build-1064983
VC-uuid: 8C96DBA4-C1AA-490E-86E4-50B76DFA31AC
Yes, the problem is that any port-profile with "l3control of ability" is supposed to only works with the vmk interfaces.
You want to put a VM interface on port-profile with l3control. We used to allow this, but for some reason any, he was shot.
Create another port-profile just for control 0 and see if that fixes the problem. Yet once make identical except for the "l3control ability.
Your version is good. I'll have to play in my lab. I'm kind of confused why your VSM2 gets blocked while quick loading when you vmotion VSM1. That shouldn't happen now.
Louis
-
How to turn off turn on privilege for ACS Ganymede +.
I have an MSFC with the following configuration.
AAA new-model
AAA authentication login default group Ganymede + local
AAA authorization exec default group Ganymede + local
orders accounting AAA 15 by default start-stop Ganymede group.
I have an ACS v3.0 under NT.
I have setup an advanced option of GANYMEDE + in the ACS which can activate the privileges for users. However, the user can still connect to the MSFC and question 'enable the command '.
Is there a better way on the ACS to refuse a user to run the 'enable' command so that it can not go mode even though it may have the secret password that is located in the MSFC.
Thank you
David
David
You can make consent orders and refuse this command 'enable '.
So now the router, you will have:
AAA authorization commands 0 default local taca group
The GBA, so that the user, under the authority of command, add the command like enable, deny arguments. '. Make sure you also unlisted arguments have denied.
Once permission to order had been enabled on the router, each user will be checked for authorization. So for other users, in the GBA box, make sure that you have - unmatched orders Cisco IOS updated allowed and also arguments unlisted allowed nec.
Make first Chang on GBA and then add the router config.
Thank you
Nisha
-
5.2 WCS and ACS 4.2
Is it possible to get the admin of WCS users authenticated on GBA? I was not able to make it work and I found a page of FAQ http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#apr6
say it is not supported. Is this correct? As I was not able to get the WCS to authenticate to the ACS. I don't get passed or failed attempts. The ACS is currently authenticate other users / devices and the GBA and WCS can both communicate with each other.
You can integrate the WCS and ACS for local users of WCS.
Add WCS to an ACS server:
http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064286
Configuration of the server credentials ACS View:
http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2mon.html#wpmkr1171779
Configuration of RADIUS servers:
http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1054014
GANYMEDE server configuration:
http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1053935
Import tasks in ACS:
http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064285
-
Dear experts,
I would like to ask if anyone can guide me through the authentication of the user in ACS5.7.
The problem is, I want to create internal users with the same name in Active Directory and take the one password to AD.
You have experiences in this regard? Your response is much appreciated :)
Best regards
APHEA
Hello
To accomplish this task, basically, you need to create the user internally the GBA, but configure the password to be checked against the AD as in the attached example.
And identity for 'Access to the default network' or "Default Device Admin" should always point to 'Internal users' under the next section ' access policies > Access Services > default access to network > identity. "
Note: Please mark as answer as appropriate
-
ACS 5.0 self of authentication
It is possible to connect to 5.2 ACS uses the users created on the same ACS (created in the component users and identity store) or an external database integrated GBA, rather than use the ACS system administrator users created the GBA.
Thanks in advance.
Jenny,
5.4 of the ACS, you can use users AD (Active DIrectory) for Admin access to the graphical interface of ACS.
Note If useful
Maybe you are looking for
-
"Content error" player - Sony BDP - S390 Blu - ray
Tonight started a message "Content error" when you try to stream videos from the Internet. Checked connectivity without wire-everything is good. Can browse the Internet. Amazon, Netflix, Hulu-all do not work. Finding all the fixes on the web. Any ide
-
I can't uninstall PCmightymax2011. Add/Remove does not uninstall the program. It blocks all programs and cannot retrieve earlier dates.
-
I ran Spyhunter program and found several viruses and then told me to clean and secure my pc.
-
Original title: I get repeated messages from Google that says, "Google has detected.I get repeated messages from Google that says, "Google has detected suspicious activity from your computer. Please make sure that you are not a robot. Type the letter
-
The print and print head alignment failed.
Black ink does not print than other print colors. "In addition, message" alignment failed "shows. Printer HP Photosmart C8180.