Users report the application crash at startup on iPad Air 15.0.0.302

Similar Questions

• Call any thread DLLs the application crashes

  I have a built in 2015-labview application that acquires spectra of 6 spectrometers via an external dll. The dll triggers an event in labview when data is ready to be pulled from the spectrometers. Since this event, I am running a reentry no void / vi which contains a node function to retrieve the data, that are configured to run in any thread, as it gives a drastic improvement of performance as apposed to run in the UI thread.

  However this can slow down the application crash with a message from windows like the following journal:

  Name of the failing application: axiom 2.0.exe, version: 1.0.0.82, time stamp: 0x5581a6b7
  The failed module name: lvrt.dll, version: 15.0.0.4024, time stamp: 0x5581ac03
  Exception code: 0xc0000005
  Offset: 0x0000000000bec7c0
  ID of the process failed: 0x15c0
  Start time of application vulnerabilities: 0x01d11e6face9febd
  The failing application path: C:\Axiom 2.0\builds\Axiom 2.0\Axiom 2.0.exe
  Path of the failing module: C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-Time\2015\lvrt.dll
  Report ID: 7d4ef3a8-8a91-11e5-94e9-90b11c894ef8

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  An example of the increase in performance, it's that I can query the spectrometer from 6 to 70-80 Hz when configured to run in any thread, as opposed to a simple 10 Hz when the Run value in the UI thread.

  Thank you

  Jimmy01 wrote:

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  Looks like that the DLL is not thread-safe. If you do not run in the UI thread, there is no guarantee that the DLL will be always called from the same thread, even if you only call it in one no reentrante Subvi. By default, LabVIEW allocates multiple threads by the enforcement system, with the exception of the user interface. If the DLL stores certain information of one call to the other, this context can be lost when run in a different thread.

  Here's a thread that provides two possible solutions; a wrapper DLL is required, use the other the utility 'threadconfig' (or the corresponding INI file settings) to force a subsystem of a thread executing unique http://forums.ni.com/t5/LabVIEW/Force-DLLs-to-tun-in-the-same-thread-expect-the-UI-Thread/td-p/11438...

  Another option would be to put the call to the DLL in a timed loop that runs constantly, and you can use a queue or the notifier to pass data to. A timed loop runs in a single dedicated thread, so I think it will work.

• How to disassemble volumes if the application crashes.

  Hello

  I'm opening a vmdk file and mounting of volumes using the code below

  m_vixError = VixDiskLib_Open)
  m_vixDiskLibCon,
  file name,
  VIXDISKLIB_FLAG_OPEN_UNBUFFERED,
  (& m_vixDiskLibHandle);
  
  m_vixError = VixMntapi_OpenDiskSet)
  & m_vixDiskLibHandle,
  1,
  0,
  (& m_vixDiskSetHandle);

  m_vixError = VixMntapi_GetVolumeHandles)
  m_vixDiskSetHandle,
  & m_numberOfVolumes,
  (& m_vixVolumeHandle);

  
  for (int i = 0; i < m_numberOfVolumes; i ++)
  {
  m_vixError = VixMntapi_MountVolume (m_vixVolumeHandle [i], FALSE);
  }

  Do an operation here...

  
  ....... How to unmount the volumes and close the disc runs if the application CRASHES here.......

  Normally I use the functions below to unmount volumes and handles closing disc

  VixMntapi_DismountVolume (m_vixVolumeHandle [i], TRUE);
  VixMntapi_FreeVolumeHandles (m_vixVolumeHandle);
  VixMntapi_CloseDiskSet (m_vixDiskSetHandle);
  VixDiskLib_Close (CVMDKFileRestore::vmdkVixDiskLibHandle.find (it-> first)-> second);

  Thank you

  Mathieu

  Hi Mathieu,

  In response to your message here (please do not cross post between different discussions)

  Finally :-)))

  I think that the chances are good that there is a light at the end of the tunnel - at least about your problem to disassemble.

  In the scenario above, if I try to mount the vmdk file after the crash that above, I get the following error message

  Read error: the specified virtual disk needs to be repaired

  I was hoping that you would report this error. Unfortunately, I'm currently not behind my development computer, which means that I don't have the VDDK header files available now, but if I remember correctly, there must be a function named VixDiskLib_CheckRepair (...) in vixDiskLib.h. Take a look at it and his PhD students. This should be the function you're looking for. The thing is that this function erases the unclean shutdown set in the hard stop dirty file indicator. Unclean shutdown as a result of the crash.

  As soon as I'm back behind my development machine, I'll send you an extract from my mount test routine that is exactly about the flag unclean shutdonw via (...) VixDiskLib_CheckRepair.

  Hang on, I'll be back in about 10 hours ;-)

  --

  Thomas G.

• System to grant to the user of the application views

  Hi all

  11.2.0.1

  Batch process Tha night encounter problem blocking where their generations report affected and delayed.

  I give this command operators, so that they will kill or stop the process that keeps the lock:

  SELECT TO_CHAR ("sysdate, ' HH24:MI:SS of MON-DD-YYYY"). ' The user '. S1. UserName | | » @'|| S1.machine | | "(SID = ' | s1.sid |)

  ') with the statement: ' | sqlt2.sql_text | |' if it blocks the SQL statement ' | S2. UserName | | » @'|| S2.machine |

  ' (SID ='|) S2.SID | |') Blocked-> SQL ' | sqlt1.sql_text AS blocking_status

  GV $ lock l1, Gv$ session s1, Gv$ lock Gv$ session s2, l2, Gv$ sqlt2, Gv sql $ sql sqlt1

  WHERE s1.sid = l1.sid

  AND s2.sid = l2.sid

  AND sqlt1.sql_id = s2.sql_id

  AND sqlt2.sql_id = s1.prev_sql_id

  AND l1. BLOCK = 1

  AND l2.request > 0

  AND l1.id1 = l2.id1

  AND l2.id2 = l2.id2;

  But this needs system views and you can not run the app user ID.

  On the security audit decision or without having violated, what I have to grant select to all system views accessed by this script to the user of the application, then create synonyms it 1 by 1?

  Or is it a one-time grant for all views of the system? So I is not need to type a plus creating synonyms so that I can't miss any?

  
  

  
  

  Thank you

  Petra k.
  

  f55237a7-2c38-4DB3-a7a3-1d77256f0730 wrote:

  Hi all

  11.2.0.1

  Process batch Tha night meets lock problem where their generations report interrupted.

  I give this command operators, so that they will kill or stop the process that keeps the lock:

  SELECT TO_CHAR ("sysdate, ' HH24:MI:SS of MON-DD-YYYY"). ' The user '. S1. UserName | | » @'|| S1.machine | | "(SID = ' | s1.sid |)

  ') with the statement: ' | sqlt2.sql_text | |' if it blocks the SQL statement ' | S2. UserName | | » @'|| S2.machine |

  ' (SID ='|) S2.SID | |') blocked SQL-> ' | sqlt1.sql_text AS blocking_status

  GV $ lock l1, Gv$ session s1, Gv$ lock Gv$ session s2, l2, Gv$ sqlt2, Gv sql $ sql sqlt1

  WHERE s1.sid = l1.sid

  AND s2.sid = l2.sid

  AND sqlt1.sql_id = s2.sql_id

  AND sqlt2.sql_id = s1.prev_sql_id

  AND l1. BLOCK = 1

  AND l2.request > 0

  AND l1.id1 = l2.id1

  AND l2.id2 = l2.id2;

  But this needs system views and you can not run the app user ID.

  In view of the security check or without having violated, what I give select all system views accessed by this script to the user of the application, and then create the names it 1 by 1?

  Or is it a one-time grant for all views of the system? So I no need to type one by one so that I can't miss any?

  Thank you

  Petra k.

  While approach posted will work subsequently, it's like making three left turns around the block;

  instead of making a single term of law.

  Place the SQL desired in a procedure (FIND_LOCKER) owned by the extremely privileged schema; then do as below

  GRANT EXECUTE ON FIND_LOCKER TO OPERATOR_USER;

• Note the application crashes...

  Note the application crashes... I have discovered that by putting my phone on "airplane mode" the app not crushed. This makes me think that there may be a conflict with the iCloud? I tried to restart but the problem persists...  Anyone has a solution, pleas?

  Hello, Craig2099!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your Notes application to close unexpectedly when you try to use it. I keep a lot of information in the Notes, so I know it's important to be able to access the app. I'd be happy to help you!

  I have some troubleshooting I suggest to go through. Before you start, I recommend you make a backup of your iPhone by following the instructions here: How to backup your iPhone, iPad and iPod touch

  Once your backup is created, go through the following steps, in order. Test after each step, stopping when the problem is resolved.

  1. Leaving the app all opened, as shown here:force a nearby application on your iPhone, iPad or iPod touch

     Then, restart your iPhone after this article: restart your iPad, iPhone or iPod touch

  2. Uninstall the Notes application, and then reinstall it. Instructions on how to do this can be found here: remove the apps Apple integrated from the home screen on your device iOS with iOS 10
  3. Reset settings on your iPhone in settings > general > reset > reset all settings. This will not delete your personal data (like contacts, photos, calendar of events, etc.), but he'll be back customizable settings (as your background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to the factory settings. It will also remove saved networks Wi - Fi and passwords, as well as all the VPN or APN settings used previously.
  4. Restore your iPhone settings by following the steps here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Then test Notes. If it works and not unexpectedly ends, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• How to save preferences if the user closes the application?

  Hello

  what Adobe Air event listener I have to use to store the preferences of users, if the application closes?

  Thank you

  Vibes

  As you can find in the sample application Starship settings (this file specifically), the only thing you need to do is

            NativeApplication.nativeApplication.addEventListener( Event.EXITING, onApplicationExiting );
  

  and then, of course, make the economy itself in onApplicationExiting().

• When you click on the 'Info' to the background action bar button, the application crashes.

  Hello

  Recently, we have brought successfully a BlackBerry 10 Android app.

  Everything worked fine, except the thing that when you click on the "Info" button in the action bar that appears at the bottom of the screen - the application crashes.

  I guess that this button should display a connection, or the help page. In our application, we have such a page (like an ActionItem in the ActionBar).

  Yes, is there a way we can fix it, so that when clicking on "Info" button to view our about page? Or at least to do something to prevent the application from crashing, for example hide this button.

  PS: We tested the app in the simulator of Alpha BB 10 Dev.

  Thank you.

  Hello

  Thank you for your comments. In fact, it is a known problem in the current Runtime Android on the Simulator release BlackBerry 10. It has nothing to do with your application, as this action bar fits into the Runtime Android and not your application. Normally when you section the 'Info' button you will see a screen showing you must use the gesture of back scanning used in applications Android Runtime. If you want your own topic button, you need to create your own menu.

  See you soon,.

  Matt

• How to allow users of the applications to create their own application user?

  Hello

  I need to allow users of my application to be able to manage the access control enforcement, which includes the creation of new users of the application.

  I tried to access control Page, even if it can "Add a user", but it does not capture passwords. So it seems access control Page can accommodate existing APEX users access applications.

  How can I accomplish my goal?

  Use a custom authentication process which is driven by one or more tables in your query...  Many examples available on the web...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• The application crashes; I just had to buy it and got lightroom 6.

  The application crashes; I just had to buy it and got lightroom 6.  Never had problems in the ten years that I used my download others and for some reason any that it blocks every 20-30 minutes.  Its been happening all week since I re-downlaoded it last Monday.

  Hi helenk,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > Performance > uncheck "use the graphics processor.

  Additionally, make sure that the program is updated: keeping up-to-date for Lightroom

  Kind regards

  Claes

• Clicking on one in first Pro 2015 masking tools will make the application crash. Why?

  Hello!

  I use Adobe first Pro CC 2015 on a Macbook Pro retina, model with 8 GB ram and OS X El Capitan Beta at the end of 2013.

  Whenever I click on any of the masking tools, be it, circle, curved square or Béziers, it makes the application crash.

  No idea why?

  Something to do with my ram capacity? Or El Capitan? Because with the Mavericks, I could hide without any problem.

  Can anyone help, thanks a lot!

  Hello

  Maybe it's not your RAM that is causing the problem, but the beta version of EL Capitan, which is undergoing trials of phase and so is Adobe with Apple's new OS applications. So, we can not provide legitimate action to perform on the beta version.

  If please wait patiently for the official release of Apple OS and hope that all applicvations works perfectly.

  Vinay

• Disable and enable all users of the application.

  Hello.
  
  Due to some data merging activity I want to disable all users of the application except those users who will be involved in this activity then is there any option profile at the SITE level or any other way through this I have to do this.
  
  Application: Oracle Ebs R12 (12.1.2)
  DB: 11.1.0.7
  OS: Linux5 * 86 X 64
  
  with impatience.
  
  Kind regards
  Mohsin
  
  Published by: 920138 on October 12, 2012 22:41

  Mohsin,

  You can set an end_date for these users (if possible) - how end-Date/remove a user of Applications [1064798.1 ID]

  There is another way through profile options, but I can't share it here since it is not supported.

  Thank you
  Hussein

• query to search for the user of the application

  Hello
  
  What is the query to search for the user of the application in the sql command?
  
  I tried the query below

  select app_user from dual;

  app_user invalid identifier

  Thank you.

  Hello skud,
  The following SQL statement will give you the APP_USER which is an environmental variable in the APEX:

  SELECT v('APP_USER') FROM DUAL;
  

  See if it works. As I used the syntax given in the triggers to record audit trail above and it works fine.
  Kiran

  Published by: chubby Kiran June 11, 2011 04:08

  Published by: chubby Kiran June 11, 2011 04:09