Using an 53131A, how do I detect the condition of no input signal?

Similar Questions

• How can I detect the support version lower than 4.7 touchscreen

  Hi all

  I am developing an app for non touch devices with version 4.5 of departure and now will make the same application for devices supporting contact, so planned to use the Touchscreen.isSupported () - but it is available only from 4.7. But the app should take charge of 4.5, so how do I detect the device is palpable or not palpable in version 4.5?

  Thanks in advance,

  Kitty.

  You can use this code:

  new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents()

• I need to get a certificate to continue using WI - FI how di I find the certificate?

  I need to get a certificate to continue using WI - FI how di I find the certificate?

  Original title: WiFi problem

  Hello

   
   
  1. who is the operating system installed on your computer?
  2. What is the exact error message that you receive?
  3. who is your Internet service provider?  Have you tried to contact them about this?
   
   
  Follow the steps mentioned below and check if that helps.
   
  Method 1: You can check if the router is configured for WPA and WPA2 connection:
  a. If the router is configured for WPA and the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA.
  (b) if the router is configured for WPA2, then the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA2.
   
   
   
   
  Method 2: You can manually disable authentication IEEE 802. 1 x. Subsequently, re - enable authentication IEEE 802. 1 x and see if the problem still occurs.
   
  See: If you use a NETGEAR wireless router, you can follow this link:
  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
  http://support.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP
   
   
  Reference: Use certificates for security and privacy
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cert_ovr.mspx?mfr=true
   
   
   

• How should I detect the application runs in the background?

  Hello friends,

  I use 2 statement to run the application in forground and background.

  UiApplication.getUiApplication () .requestBackground ();
  UiApplication.getUiApplication () .requestForeground ();

  I need to check my application is running in the background or forground? someone help me how should I detect that my application in what state?

  {if (condition)}

  System.out.prinltn ("application run in Background");

  }

  Else if (condition111) {}

  System.out.prinltn ("application in the foreground");

  }

  What is this condition? and condition111? Please help me with this...

  Thank you and best regards,

  Ajay Patil.

  Hello

  With the help of UiApplication.getUiApplication () .isForeground (); You should be able to determine if the application is in the foreground. Hope that helps.

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• How to programtically detect the bedside mode is on or off?

  Hello

  Is there a way out in the api to detect the blackberry on or off clock bedside mode?

  Thanks in advance

  No, there is no API for this.

• How to set up the PFI lines as input to PXI-6713 module

  Hello

  I have 6713 PXI module in my chassis PXI-1044. I have configured the PXI-6713 module to geneate some analog signals to my Board of Directors.

  Council inturn process this analog signal and answers in return the status signals through a registry to the Board of Directors. In my application, the status bits in the register state of the governing body are mapped on the PFI 0:3 bits of the PXI-6713 (pins 11,10, 42 and 43) module.

  My query is how can I configuration lines PFI as 6713 PXI module entries to read these status bits?

  May be less than the explanation could give you little more information w.r.to my request.

  When I use NI USB - 6008 module to read the same bits, because this unit has 12 e / s digital, I was able able to read the status bits in the last 4 digital lines by setting up those digital lines as input.

  In the PXI-6713 module, I have only 8 digital lines. These 8 digital lines I used to send digital signals to the Board of Directors. I find myself with no digital i/o. Therefore, I could not use these digital lines. I'm left with only one option to use. Joana re PFI lines. Also the bits of status in the axis of the room are mapped such that the bits can be read through the PFI lines.

  I was wondering do we have any example code to use inorder to read these status bits to the Board of Directors using the PFI lines.

  Please let me know if you need more information to help out me.

  Thank you.

  Hello

  When using the PFI PIN as input, you can individually configure each PFI for edge detection or level and the selection of the polarity.  This information of PFI are referenced in the manual of Series DAQ Analog Output on page 6-1 (http://www.ni.com/pdf/manuals/370735e.pdf).  Unfortunately, the PXI-6713 PFI lines are able to time a signal input and output for functions, AO or counters/timers.  The ability to create static DI of the PFI lines is not available for the PXI-6713. However, some cards have this capability.  The latest National Instruments products with PFI lines have the option of setting as PFI lines:

  1. Static digital input
  2. Static digital output
  3. Input signal of sync for functions HAVE, AO, DI, or counters/timers
  4. Output signal of the calendar functions HAVE, AO, DI, or counters/timers
     (http://digital.ni.com/public.nsf/allkb/14F20D79C649F8CD86256FBE005C2BC4)

  When the static value such as DIO, PFI lines are assigned to a different port (for example. PFI0-7 is Port1).  More details on this subject can be referenced at:

  http://digital.NI.com/public.nsf/allkb/DA2D3CD0B8E8EE2A8625752F007596E1

  http://digital.NI.com/public.nsf/allkb/862567530005F09E8625677800577C27

• How to "automatically detect the proxy for this network settings" and "Use system proxy settings" work behind the scenes?

  How can I see what the firefox proxy actually uses when I check either of these two options?
  There go to Internet Explorer?
  They are stored somewhere in the registry?

  Hi conectionist,
  This is taken if there is a proxy configured in the network settings on your operating system. If you want to test there may be further on:

  • https://addons.Mozilla.org/en-us/fire.../?src=search

  Please feel free to research to find a better if necessary.

• How can we detect the action of "clicking outside of the dialog box"?

  When we have a modal dialog box, click outside of the dialog, its parent window, for example, how this action event can be detected? I want to implement certain actions in response to this event. Thank you!

  Here are some ideas for further research:

  You can first in the stage variable parent in the dialog box and then attach to events 'touch' here:

  scene.setOnMouseClicked (myDialog.mouseHandler,

  scene.setOnTouchReleased (myDialgog.touchHandler

  But it can work only if the dialog box is directly on top of the scene of the mother.

  If the dialog box is outside parent in any part you will probably need to work with the operating system.

  In windows, you will need to call some functions search for win32 if ' use java call win32 functions.

  Or, you can write a windows program that listens to the operating system event queue, then tcp to your dialog box.

  Many search results obtained: windows - how the message queue works in Win32 - stack overflow

  But then if your mac or Linux,...

• I bought a new iMac, and I have CC on my old iMac and my laptop. given that I am allowed to use 2 computers, how can I transfer the license out of my old ompuetr cdesktop to my new

  How to transfer a license cc of my old iMac desktop to my new? I use cc on my laptop as well

  Hi Rose,

  You just have to run one of the CC apps on your old iMac and make a 'sign' off (on windows, it is in the example Photoshop menu 'Help', do not remember for Mac)... who warns you that you cannot use CC apps on this computer more.

  Then install CC on your new iMac and connect you to it. You will then use the CC app to install photoshop etc. on your new iMac.

  Kevin

• How to disable detect the proxy server domain controller settings 2003

  Hello everyone,
  Here's the scenario

  Server:
  2003 domain controller
  By default IE installed: IE 6

  Client:
  Windows XP
  Internet Explorer version 8.

  Problem.
  Once a connection to domain to his machine (client) and open IE user it takes about 2 to 6 minutes to load correctly. It detects message proxy settings in the background (which can be) the cause of the problem. I want to bypass detection pox affecting as well and for that, in group policy, I enabled these settings.

  the main objective is to reduce the delay for IE load the home page at end of client in the above configuration.

  What should I do?

  Thanks in advance.

  On the client machine, to appear:

  Control Panel-> Internet Options.

  Click on the 'Connections' tab at the top

  Click on the "Network settings" button near the bottom

  Uncheck "automatically detect connection settings.

  Change other settings that you need on this page, as it will fit is no longer automatically.

  "OK" your way out

  HTH,

  JW

• How can I detect the end of HTML5 video and do something?

  var vid = sym.$("Holder");

  vid.html (' < video width = "720" height = "405" id = "myVideo" src ="http://content.jwplatform.com/videos/GwRORsk1-gBf37dJ7.mp4" type = controls video/mp4 = "orders" autoplay = "autoplay" < / video > ');

  I have this in a trigger on the chronology of the scene, you could have all this code in a trigger, or composition ready or complete creative... depends on when you want to play video I guess?

  To hide the video, you can simply use. hide();

  My code looks like this;

  var vid = sym.$('rectangle_video_housing');
  VID.html ("');

  var vidEnd = $(vid) .children () such ();
  .bind $ ('complete', function () (vidEnd)
  {
  VID. Hide();
  });

• I build a project using reflow. How can I get the html and css code in Dreamweaver to finish?

  I am new to reflow. I want a design web resonsive and built my homepage of reflow. Now how can I do to get it to end it up in Dreamweaver?

  I am on Windows 7, version creative cloud of Adobe products.

  Help!

  Save the project redesign or in a folder on your hard drive.

  In DW, describe your site by going to Site > new site and navigate to the folder that contains your project of reflow. See also that this related to discussion:

  http://forums.Adobe.com/thread/1197681

  Nancy O.
  

• How can I detect the minimum and MAXIMUM values of the inputs to the NOR-Scope channels (NI-SMU-1073)?

  
  

  Hello Philippe,

  Take a look at the example below. Retrieves the Min and Max of table X and also correspondent has the value Y.

  Best regards

  Klas

• If I created several pdf files using Acrobat Distiller.How I would save the names of the files that I've created for later use?

  solve my problem community.

  Create a text file and put the names of the files into it.