Call from falling down when it is connected

Similar Questions

• Satellite L755 - battery falls down when it is turned off

  Hello!

  I just bought a L755 Satellite and the battery goes down when it is turned off. Does this make sense?
  I charge for a few hours and it seems that the battery still lasts, but in a few days, the load comes down to 83%.

  Thanks for supporting.

  Mario

  As stated in this thread: some features should be disabled in the BIOS and the system.
  I mean some features already mentioned options:
  Wake On LAN (in the BIOS and in device-> Lan Card Properties Manager)
  Wake on keyboard
  USB sleep & fees

• Satellite X 200 SLI falls down when the HDMI cable is connected

  Hello world

  I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

  I did not almost any update, but still, this shouldn't happen on arrival!
  Clues?

  Many thanks for any help on this!

  Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

  Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

  However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

  But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
  Did you use the right cable?

  As you can see an investigation is necessary to locate the cause of the error.

  If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

  Good luck

• Computer shuts down when internet wire connected at startup

  Computer works very well if started without Wired internet lead.  If the cable is connected at startup, computer stops with message blue screen STOP: 0x0000008E (0xC0000005, 0x0000000D, 0x9C0A36A4, 0x00000000) beginning physical memory dump. Complete physical memory dump. He then proceeds to stop down and re boot constantly.

  I did a system restore worked, but if I remove the internet head the computer shuts off with the message of such blue screen mentioned previously.   I am running Microsoft Windows XP Professional Version 2002.  My anti virus doesn't show any threat from virus, worm, etc..  Any suggestions out there please?

  Microsoft helps you better if you provide us with information on your system and configuration of the system.

  for example, make, model, type of internet connection, antivirus company etc., ram, OS

• Performance of WLan Z830 satellite falls down when the AC adapter is plugged

  Hello

  When I plug my whole wifi power cord breaks. 54 MB to 2Mb!

  In the Power Options, everything is the same as the answer key, battery with or without.

  Any ideas?

  My camera is a

  My laptop:
  SATELLITE Z830-10J ZB040302H

  How about WLan driver update?
  Have you tried that?

  To be honest I have never heard of such symptoms when the power adapter has been inserted
  Of course, I read on the issue when the power adapter has been removed from power saving

• HP ENVY Phoenix 810-430qe: Pheonix qe810 Office falls down when entering standby or hibernation.

  I got my office 810, 2 months ago.  It was working properly when I first got the computer.  After about 3 days, I discovered that the computer would be turned off when I tried to use it in the morning.  I updated all my drivers software and played with the settings for sleep mode.  I decoded the log to dump product in the crash - the only thing that it points to, is that an unknown driver is broken down.  This is a common problem - does anyone have an alternative potental to this question.  Any help appreciated.

  Hello @Brian_S1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your computer hangs when it goes into sleep or hibernation mode, and I'd be happy to help you in this case!

  To correct this problem, I recommend that you follow the steps in this document to troubleshoot sleep and hibernation in Windows 8, issues implementation. This will help you to activate your system enter the mode "sleep" without crashing.

  I also suggest reset patterns of default power on your system by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Stack steals focus from other applications when trying to connect (and does not connect)

  We use the Toshiba stack in a communication workshop application. The application attempts to establish contact with other BT devices every 5 seconds. It runs in the background, so that the user can do what he usually does on the PC. However, if the connection cannot be established, the user loses focus on the application it is currently using, and when the focus returns does not return completely, the user should click on what he was doing. In this case every 5 seconds 2 seconds. This makes the useless PC for tasks other than the management of our product. We use the SPP profile series. Is there a solution?

  Check in "Bluetooth Settings-> Options-> other-> COM Auto settings-> connection settings... »
  If the COM ports are listed. Deselect it if so. Please let me know if it works for you.

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• Always sound coming from the speakers when headphones are connected

  When I plug my headphones, the continuous sound coming out the speakers with no sound at all through the headset. When I go on manage audio devices, the helmet will appear, but it says that they're disconnected even if they are connected. I know the headset works very well because they work with my phone. I have Windows 8. What can I do?

  Hello. This is usually a driver problem, especially on models having Realtek audio.

  If you need more help please give the complete model name of the laptop.

• BlackBerry torch Smartphone click when I incoming calls from reception - even when silence

  Anyone else have a problem with the BB Torch clicking when an incoming call is received?  This occurs even when my bb is on silence.  How can I stop it?

  Not a problem, if you have any problems or questions, we're always here in the forums.

• WIN8 app Pinball Fx 2 falls down after Xbox Live connection on PC

  We have two PCs at home; at a time with Windows 8 pro.

  We downloaded Pinball Fx 2 of the store. It installed fine.

  It is necessary that you connect to a profile from Xbox Live to play.

  On the same machine, everything works fine. : open a successful logon and play games without a problem.

  On the other PC, the game auto-signes in the Xbox Live profile; and just as it says it is signed, the whole game crashes to the desktop.

  No idea what to do to make it work on this x 64 PC with Win Pro 8.

  Someone has this specific problem with this game or other type of Xbox Live game?

  Suggestions?
  Thank you.

  I had this same problem recently too. Couldn't find an answer on the Internet, I tried uninstalling and reinstalling Pinball FX2. This solves the problem! And I lost one of my best scores. I hope this helps you too.

• Firefox falls down, when I use "gmx.de", just once or twice, it works normally

  29.08.2014 BP-536a9381-e1ef-4A7D-a1cc-5d2e92140829 18:14
  29.08.2014 BP-3a259f1c-7f4c-482C-9f15-fc8d62140829 11:03
  28.08.2014 BP-7e56f6b9-5b35-4E07-8990-ae7d12140828 22:31
  28.08.2014 BP-88dca433-4b1a-49D8-B31a-7ad912140828 22:31
  28.08.2014 BP-de92f45e-cf67-4dbe-BBC1-9376a2140828 07:39
  28.08.2014 BP-25728a46-CB50-412A-8C7F-e0dc92140828 07:39
  28.08.2014 BP-11248ac3-1f60-4C40-91A6-f2c6a2140828 07:38

  In a firefox safe mode will also down
  I also tried to reset firefox firefox updated

  Process Type plugin Shockwave Flash Version: 11.7.700.169 Filename:NPSWF32_11_7_700_169.dll

  Update your Shockwave Flash r0 http://get.adobe.com/shockwave/ v14.0
  The link to Flash Player http://get.adobe.com/flashplayer/ v14.0.0.179

• Update to Firefox 8, falls down and does not connect to a Web site, what do I do?

  Before I updated, I could open, load a website quickly and we were on our way. However, I opened it and most of the time it HANGS after that click on a bookmark or type a site.

  Even when it does not crash, it does not load a Web site. I try another browser and load very well the network Web site is NOT the issue.

  I uninstalled the new Firefox 8 and returned to 7.0. I'm happy for the moment, but this problem is worrisome.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Pro Evolution Soccer 2010 falls down when I'm trying to load a save game (runtime error!)

  When I'm trying to load a backup game Pes 2010, the game crashes with the following message:

  Microsoft Visual C++ Runtime Library
  Runtime error!
  Program:D:\Games\Pes2010\pes2010.exe

  This application has requested the execution to terminate in an unusual way.

  Hi sKybOy,.

  Welcome

  I suggest that you contact the manufacturer of the game for further assistance, given that the problem is specific with the patches published by the manufacturer.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.