using Booleans to change a large number of parameters

Similar Questions

• Connect the large number of parameters and variables between Verstand and model of Labview

  We have an installer of dyno with a chassis PXI-E running Veristand 2014 and 2014, inertia. In order to strengthen the capabilities and timing of the Veristand, I would use models of Labview to perform tasks is not possible by Veristand and inertia. An example of this is to determine the maximum amount of a large number of thermocouples. VeriStand has a comparison function, but it compares two values at once. This makes long and rigid emissions. LabVIEW, on the other hand, has a function which words one to get the maximum items in a table in one step. I need to use Labview to 'send' the thermocouples of 50 or more to the Labview model. In addition to the variables that must be communicated between Veristand and Labview, I also need to present Labview with the threshold and setting parameters. Forums and user manuaIs understand that you must use the connector pane in Labview Veristand System Explorer mapping to expose the inports and isolated villages. The problem is that the part of Labview connector is limited to 27 I/O. How to overcome this limitation?

  BTW. I'm relatively new to Labview and Versitand.

  Thank you.

  Richard

  You can work around this limitation by putting your orders and clusters indicators. Then set the cluster to be required or recommended to indicate whether contained controls are entered or parameters, just normal.

  

• How to change a large number of images using CSS in HTML5 and CSS3

  I have a CSS image gallery that displays a larger picture with descriptive text underneath, a thumbnail image is hovered over.

  Each photo has code like the following:

  < a class = "thumbnail" >

  "< img src="thumbs1/paradethumbs/DSC_0073.jpg "alt ="thumbnail"/ >

  "" < span > < img src="pics1/paradepics/DSC_0073.jpg" alt = "" / > < br > 19 - a black face sheep. " </span >

  < /a >

  The first source is an image thumbnail, stored at a size of 72 by 48.

  The second source is an image stored at 600 x 400.

  When the thunbnail is hovered on, enlarge the photo is displayed to its size using css.

  There are 20 or if thumbnails in this gallery and different numbers in the other galleries that use the same code.

  The above example is number 19 of 20.

  This works very well on tablets and large screens.

  When I want to show it on an Iphone or similar, with a screen that is 480 or less wide, I need to enlarge it up to 300 large scale.

  The Iphone will have a lower quality of the image to a larger screen, it won't matter too much if photography 600 x 400 is reduced, and after having tried giving him an ID with CSS as

  #imagescale {width: 300px ;} seems acceptable.} However, as the ID is supposed to be unique, then it's a no go area for the remaining photos.

  My problem is how can I select the second source of the image shown in bold above and scale it and reach of 50% text.

  The text is not too important because it can be modified to fit - the image is the main problem.

  I need something like "If the display is less than 600 and the image is located in the directory of photos, it shows 300 offshore."

  I hope that the browser will take care of the height.

  Any suggestiosn would be appreciated.

  Howard Walker

  Unlike #IDs, the .classes can be used multiple times per page.

  Use the questions from the media and an external CSS file for portable devices,

  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_html5_pt3.html

  CSS:

  . {img full-size}

  Width: 50%;

  height: 50%;

  }

  . Full-size {make-size: 50 %}}

  HTML:

  class = "life-size"> 50% of size

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Caveat "the formula uses a Boolean value instead of a number" would dismiss

  Hello!

  I do a "Calculator" to get estimates of price for the projects, according to which processes the customer wants.

  Rates for each process are added in another table, and I use the list of control buttons to enable or disable the various processes.

  Here is an example of a formula:

  

  D3 determines if the part of the project modeling is performed, so the price will be or will not be calculated.

  If D3 is true, the result is multiplied by 1, give me a positive amount. If false, the result will be multiplied by 0, 0, so nothing to add to the final cost he send me some.

  Same for B4 in the same formula.

  This formula is repeated all over the chart, with minor changes to add more complex options, but it's all the same.

  Everything works fine, but I got those blue triangles warning me of "the formula uses a Boolean value instead of the number". That's fine with me, I like the use of the Boolean types, and they make my formulas work well in my calculator. How can I reject the blue triangles?

  

  They are a little annoying. And they do not really correspond with the general style of my calculator.

  I saw someone talking other types of formulas, with SEARCH and yews, but who is really complicated and I don't know how to do... Especially for a simple calculator

  Is there a way to simply do not display warnings?

  Using the version 3.6.2 on a MacBook Pro, OSX El Capitan 10.11.5

  Thank you!

  Hi Sinshassan,

  I don't know a way to escape your blue flags except to make a formula which is consistent with the expected numbers. It is not difficult.

  

  My formula D2 = yew (AND(D1,B2), C2, 0)

  The IF statement tests the two D1 AND B2. If they are true, then it indicates the value of C2 your carbon Modeling::High Poly #1, if one or both are false (unchecked) then 0 is displayed.

  Give it a try.

  Quinn

• How can I change the phone number to use Face Time?

  How can I change the phone number to use Face Time?

  Your phone number come from your SIM, and when you open a session and activate FaceTime. It should appear automatically. If it is not, then I would say that your FaceTime does not complete the activation process. If you go to settings > FaceTime, you see something awaiting activation or waiting for activation under the switch to turn it on?

• I used all the memory in my iPad and you want to delete some pictures.  Any way to select a large number of photos for deletion at the same time, rather than individually?

  I can't find a way to the iPad to choose a large number of photos at the same time (similar to the use of the SHIFT key to select a group of files in windows).  I would like to delete a large number of photo files to save storage space can be used for the future taking pictures.  I wonder if there is an easier way to do that than to have to select and remove each file individually rather than delete them as a group.  By the way this should be done twice if you want immediate deletion.  There must be an easier way.  We appreciate and support.

  Open your photos > press Select > drag your finger through the photos you want to delete. To remove deleted lately, open the recently deleted album > press Select > tap Delete everything in the upper left corner. -AJ

• A large number of dates on my photos in Iphoto have changed to January 1, 2003 00.00.00 how did this happen? How to cancel? Con

  MacBook Pro 13 inch, early 2011

  10.10.5 version

  Processor 2.3 GHZ

  Memory 4 GB

  Storage 318,84 GB

  A large number of dates on my photos in Iphoto have changed on 1 January 00.00.00. How did this happen and how to fix it? Con

  What has changed since they were correct?

  What version of iPhoto do you run?

  Best cure is probably to restore your backup when it was correct

  LN

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• vmtoolsd.exe uses a large number of discussions

  Hi all

  We use VMware tools a few years now on our Windows 2012R2 environment.

  But the last months we receive complains that some of our users of remote office that our servers are slow, memory is full, and users cannot sign outgoing/incoming.

  After investigating this matter, we see that VMtoolsd.exe uses a lot of memory.

  And it takes a lot of time to kill the process.

  In the resource monitor, we discovered that the process uses a lot of discussion (sometimes 80,000). After killing the process, threads are down slowly to zero. After that the server responding normal.

  On the internet I can't find someone who has this problem.

  We have a large number of servers. This question is only a few of them.

  We use ESXi 5.0 and VMtools 8.6.11 build-1310128

  

  Anyone know what is happening?

  Wow, it looks like you are using the tools provided with ESXi 5.0 Update 3 October 2013.  There has been several fixes for ESXi 5.0 update 3.  The latest patch for ESXi 5.0 features new tools (8.6.15 build-2495133).

  See here: http://packages.vmware.com/tools/esx/5.0latest/index.html

• my computer was stolen. Is it possible to change my serial number or disable the software on a computer, I did not. I use Adobe Creative Suite and Web Premium CS6 Student Edition on a PC.

  My computer was stolen. Is it possible to change the serial number or disable the program on a computer, I did not? I use Adobe Creative Suite CS6 Student Edition on a PC.

  Hi Tiffanie,.

  Please contact customer serviceto obtain the deactivation request.

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Best practices for the handling of data for a large number of indicators

  I'm looking for suggestions or recommendations for how to better manage a user interface with a 'large' number of indicators. By big I mean enough to make schema-block big enough and ugly after that the processing of data for each indicator is added. Data must be 'unpacked' and then decoded, for example, Boolean, binary bit shifting fields, etc. The indicators are updated once / sec. I'm leanding towards a method that worked well for me before, that is, binding network shared variable for each indicator, then using several sub-vis to treat the particular piece of data, and write in the appropriate variables.

  I was curious what others have done in similar circumstances.

  Bill

  I highly recommend that you avoid references.  They are useful if you need to update the properties of an indicator (color, police visibility, etc.) or when you need to decide which indicator update when running, but are not a good general solution to write values of indicators.  Do the processing in a Subvi, but aggregate data in an output of cluster and then ungroup for display.  It is more efficient (writing references is slow) - and while that won't matter for a 1 Hz refresh rate, it is not always a good practice.  It takes about the same amount of space of block diagram to build an array of references as it does to ungroup data, so you're not saving space.  I know that I have the very categorical air about it; earlier in my career, I took over the maintenance of an application that makes excessive use of references, and it makes it very difficult to follow came data and how it got there.  (By the way, this application also maintained both a pile of references and a cluster of data, the idea being that you would update the front panel indicator through reference any time you changed the associated value in the data set, unfortunately often someone complete either one or another, leading to unexpected behavior.)

• Boolean button changes color briefly when you press

  Hi, I use Boolean button is a toggle, so I want only text changes when pressed without changing the appearance of the button.

  I am able to change the color on properties to match the color Off (I use the silver palette so normally is yellow), but when the Boolean button changes to, there is a brief change of color again. Is there a way I can get rid of him?

  In fact, some of my buttons Flash black while others are flashing yellow. I have no idea where this is defined.

  Thak you very much.

  There are 4 colors for Boolean values ON and OFF more past of WE OFF and goes off to WE

  You see only the color of transition when you have the locking set of 'locking' Mech by releasing

  Set on "lock when you press on" and you will not see the colors of transition

  You can set all 4 colors by using the Colors property [4]

  Colors [4] property

  Short name: color [4]

  Request: Development of database system

  Class: Boolean properties

  Usage: Create a property.

  Table of up to 4 (foreground color, background color) pairs, where foreground color is the color of Boolean control foreground and background color is the background color of the Boolean control. Color pairs include False, True, true to False and false to True.

  You can set the color of the object of the façade by plugging in a hexadecimal number with the form RRGGBB or by plugging in the constant color box in the property.

  This property is similar to the option of colors on the page of the appearance of the Boolean properties dialog box.

  If the Boolean control has four (foreground color, background color) pairs for four States, this property always returns an array of four (foreground color), background color pairs during playback. When you write, you can pass an array of length 1, 2 or 4. If you pass in a single element, this property uses the value of the element for all four States. If you pass in two elements, this property uses the first value of the element to false and true false States. Similarly, this property uses the second element for the real and the fake in real States.

  If the Boolean control has one pair (foreground color, background color) for all four States, this property returns an array of pair (foreground color, background color) during playback, and uses the first element of the array when writing. You cannot change a Boolean control with (foreground color, background color) pair to a Boolean control with multiple (foreground color, background color) pairs.

  This property uses only the True to False and False to True States when you set the Boolean control to latch or switch when released. You can get and set these (foreground color, background color) pairs even if you do not have the control latch or switch value when released. they are not used.

  Because this property does not change the Boolean control data, you can set it at any time.

  You can use this property to Boolean control on the Classic, Expresspallets, modernand silver . You cannot use this property for Boolean controls in the System palette.

• Manage a large number of SPAx102s

  That service providers use to manage a large number of 2102 s or 3102 s?  How the firmware versions are controlled and held?  What configuration management & password?

  Thank you!

  Hello

  as called "configuration" is used for this. SPA-xxxx devices has ability to remote download (http and tftp) settings on regular basis, looking for changes, deploy the settings file and restart. The file is loaded based on the MAC address of the device, so all devices really does it's own file.

  Provisioning can set the adapter password and can also rule of the wire for the FW update when needed, and SP-xxxx adapter will check the header of the FW file and so more recent (or better different) that running into the adapter, it will download the FW, flasher the FW on the idle time and restart.

• using image instead of the image number labels?

  Hi team,

  I'm building a major project that would be modified during its construction, I stress a little because I'm confident on the timeline to move forward and backward through the structure, (as well as the user with the ability to use a menu to go where ever they want).  Then out to form the menu that specifies where to go, there's a front and back button using framework next and previous to move forward and backward.

  ..  So, what happens if after construction of a large part of this, the client wants to put in an extra page? This will upset my navigation (OR if I put the extra page at the end of the timeline menu works fine, but forward and backward buttons may not work properly)

  So should I use image instead of the image number labels?  (How can I do this gotoAndStop (?);)

  Or y at - it another way I should approach this?  like having a variable to keep track of page instead of numbers of chassis number?

  What do you think?

  See you soon

  Void

  There is no need to rename the image labels just because you add a new.  This is one of the main reasons to use labels instead of numbers frae... it saves you from having to change completely due to a.

  (How can I do this gotoAndStop (?);) ... -->. gotoAndStop ("labeltext");

• Manage the large number of users

  Dear all:
  
  We get a pre Prod database which we may have to create around 1200 users who have account within the database. Here are my concerns:
  
  1. What is the best way for users to connect to the database? We used traditionally file Tnsnames.ora but it would be tedious to go with that with so many users. We have heard of Active Directory that could help users to connect to the database. Is a proven way to go and how to implement it?
  
  2. What are the parameters we need to change/change in our spfile/init to welcome a large number of users? We are and we will use dedicated connections. It seems to me that we have to change the setting to a number greater than > 1200 at #process. Memory management we define automatic as SGA and PGA managed by Oracle. We have already appointed a large part of memory(8GB) to Oracle to make the management of SGA/PGA both for us.
  
  3. what other issues we must fear for the database when so many users log in the database? Most of these users won't use any storage to create objects.
  
  
  Any help, advice, suggestion will be highly appreciated.
  
  Thank you.

  1. in fact, it is quite easy to write Windows scripts to distribute files tnsnames.ora, and it will be cheaper and easier to manage than the OID (Oracle Internet Directory), which is the LDAP solution to replace tnsnames.ora for searches.

  2. in the function if you use the shared server or dedicated connections. If you are using dedicated connections, then the process is the main. Allow any dead or inactive sessions, process etc., so less substantive 1500.

  3. This isn't a lot of users. Some databases out there takes care of hundreds of thousands of users. You must work on how many of these users will be active at the same time, and what will be the volume of transactions. For example a large report can use more resources than 1000 users, data entry.