using db even for srm as virtual Center

Similar Questions

• can I use licience even for my computer and a wacom tablet?

  can I use licience even for my computer and a wacom tablet?

  Nimet, if you talk about Adobe Creative Cloud, you can see point 1.1 from the link below:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

• Using of MS Cluster HA providing virtual Center 4.0

  Hi, we currently use ESX3.5 and Virtual Center 2.5, I'm about to start an update on all our services for 4.0 VSphere and virtual Center 4.0.  For the moment, we have a node two MS Cluster to connect to the DAS storage that supports Virtual Center 2.5.  I need to know if 1: VCentre 4.0 is supported running on a MS Cluster and 2: are there documents describing the process to create the cluster group.

  I did this several times for VCenter 2.5, but I am not able to find info on VCentre 4 and all my research seems to lead me VCentre Heartbeat.

  Any help is appreciated.

  The "Setup for Failover Clustering and Microsoft Cluster Service" for vCenter 4.1 can be downloaded from http://www.vmware.com/pdf/vsphere4/r41/vsp_41_mscs.pdf and vCenter 4.0 use link http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_mscs.pdf

  I hope this information helps

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  F10

  VCP3, VCP4, HP UX CSA

  http://KB.VMware.com/

• Considerations of Design for the U1 Virtual Center 6.0

  I look at the deployment options in my environment and the plan initially to resist a LAB environment. I was looking at the possibility of defending the VCSA "LAB" with HA PSC behind and F5 load balancing. My question / concerns are I will be at a later date connect you to windows or virtual VCSA in this HA PSC environment? I know that you cannot mix windows and the PSC system, but I think that you should not have problems connecting a virtual center of windows to VCSA PSC? I hope that what I am asking is logical...

  "vCenter Server Deployment Models" > "mixed operating system environment' > 'Eexample of a mixed environment of operating systems with a device of service of external platform controller' section of the documentation of vSphere 6 have answers to your question." " It goes the same for environmental HA PSC behind F5.

• Active use of memory for an empty virtual computer

  Hello

  I just deployed a VM and set the client memory to be 10 GB.

  However, I have not yet installed any OS on this virtual machine.

  I just turned on the virtual machine and sailed to the tab "resources" of the virtual machine and saw that the active memory is 7.5 GB on the 10 GB.

  I try to understand the reason for this, and as I mentioned earlier that it is bone but it did not always active memory is 7.5 GB.

  So who could use this memory at this point in time. ? (see the attached screenshot)

  No idea why that number?

  Thank you

  

  By design for ESXi 5.0 refer this VMware KB but it feel right for your case (75%).

• Using build even for phones 4.5 and 4.7

  Hello

  We are about to add support to our application. The API for this are in the OS 4.7. However, we would like to avoid having to release a different construction for 4.5 phones. Unfortunately, when I add a class that derives from BlackBerryCanvas to my app, even if I don't make reference to this class anywhere else, I get the following message when you start the application on the curve:

  "Start [app] error: class 'net.rim.device.api.lcdui.BlackBerryCanvas' not found."

  Is it possible to avoid this (other than publishes a separate version) message? I'd be ready to convert my midlet an application to UI if necessary.

  All devices OS has its own set of classes taken in charge.

  Some classes available in JDE RIM API 4.7 simply do not exist in device OS 4.5

  And there is no way to add them to the device OS 4.5

  JDE RIM API 4.5 classes exist in the device OS 4.7.

  Unfortunately there is no work around to force the device OS 4.5 to run the application with RIM API 4.7 indoor classes.

• Update of ESX4 without virtual center or Update Manager

  Hello

  I use a 1 host configuration, where Virtual Center is installed as a virtual machine. I understand that this is not "best practice". Our host in a data center and rack space is limited for us. Anyway, how we would update ESX in this environment? Virtual Center being a virtual machine, it will have to be stopped to host clean up the updates. We cannot provide a physical box at present to perform Virtual Center. Is there therefore a non Virtual Center / Update Manager ESX update mode?

  Thanks as always...

  Unfortunately, it will not work with ESX - because updates are done differently. Each update in ESXi update the firmware to the previous version, while in ESX each patch is added to the ESX operating system.

  The download link of the last update is here - https://hostupdate.vmware.com/software/VUM/OFFLINE/release-166-20091202-254879/ESX-4.0.0-update01a.zip

  You will have to powerdown your VMS put your host in maintenance mode - install the patch

  The full PDF is here - http://www.vmware.com/pdf/vsphere4/r40/vsp_40_esxupdate.pdf

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• Try to update to Virtual Center Server

  I've recently started a business and need to update their virtual Center Server, they run the 2.0.1 version.  When I try to download updates VMWares site won't let me. It says I need a license for Virtual Center 2.0.  I see that the company has a license for version 1.0, but I do not see a 2.0.  Could they have had version 1.0 patched to 2.0.1?  How are they able to run 2.0.1 version if they do not have a licesnce for her?  How can I move forward with this upgrade.   I am also able to download updates for ESX server, virtual center just not.

  I would call VMware and know who registered your VM products and if the interview is still active. Having the license file will help if they do not find you in the database. If you use Notepad, you can view the license file and it should show you what you licensed and have a name associated with it.

  Something like that

  INCREMENT VC_DAS VMWARELM 2005.05 permanent 4.

  VENDOR_STRING = "licenseType = Server;" vmodl = das; desc =-VMware

  HA; capacityType = cpuPackage' Publ. = January 20, 2009.

  NOTICE = "FulfillmentId = XXXXXX; name = AARON' TS_OK.

• Use of Virtual Center with SRM

  I plan to our implementation of the SRM and understand I need 1 Center Virtual Server in each site. At this moment I have a unique virtual center server that manages both sites.

  Am I right in thinking that I need to have only the hosts in a site connected to the virtual center server in the same site and the same thing on the other side?

  Right now I am able to stop a virtual machine in a site and make a cold migration from one data center to another.  My understanding is that I'll lose this feature by going to a multiple configuration of virtual center. Is this correct?

  Thank you!

  Yes, it's okay...

  A VC on the protected Site. A VC on the recovering Site.

  As an ESX host may not be a member of two VCs, at the same time - you will be able cold - migrates both...

  Exported to the OVF format and import using OVF are perhaps - an alternative...

  Concerning

  Mike Landry

  RTFM education

  http://www.RTFM-ed.co.UK

  Author of the book of MRS: http://www.lulu.com/content/4343147

• Incorrect value for its use of virtual computer memory in Virtual Center

  Hello everyone

  I have a problem to track usage of the memory of some virtual machines in Virtual Center.

  The virtual center of the opening interface is reported to me that virtual machines have a use of memory about 95%. Accessible through the console of the machine, however, the Task Manager shows me a memory about 15-20% and 4% of the processor usage.

  The machines in question are among other the domain controller is working correctly.

  Thanks in advance

  Hi dmilazzo,

  I had this problem a few weeks ago. After updating my ESX hosts, this problem has been resolved.

  Are yours up-to-date?

  René

  ---

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

  ---

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• Virtual Center for a given host list

  OK, I'm sure that miss me something easy here so I'll throw out and see if someone can help.

  I'm trying to do a report on my hosts that lists the number of processor sockets, carrots VMS, cluster parent and Center Virtual parent.

  For the life of me I can't figure out how to find the virtual Center.

  I connect to multiple virtual centers like this connect-VIServer-Server Denver.myorg.com, Chicago.myorg.com, Savannah.myorg.com

  Greetings-

  I see.  Looks like that the property on the VMHostImpl object (returned by Get-VMHost) was not always there.  I was checking against an environment that has the API vSphere 5.1.  I saw, as you have said, that these other properties were not present during the test against an API v5.0 environment.

  So, Yes, as you said - the '. '. Client.ServiceUrl"property of the View object for the host has a string that can be used to infer the vCenter server name.  And, you can still access this property of the VMHostImpl object via the. ExtensionData property.  Something like:

  Get-VMHost | select Name,    @{n="vCenter"; e={($_.ExtensionData.Client.ServiceUrl -replace "http[s]?://", "").Split("/")[0]}}
  

  What do I do?

• How to check what database is used by VMware Virtual Center?

  Hello

  I recently inherited a small environment and I was asked to upgrade ESX 3.5 to ESX 4.0. I'm not a person from the database, but how can I check what database is used by VMware Virtual Center? According to the guide to upgrade the MSDE database is not supported in ESX 4.0.

  I want to just make sure that we did not use this database. I looked in the ODBC Data Source Administrator. Thanks to the system DSN, I saw that the drivers for Vmware Update Manager and Vmware Virtual Center are "SQL Native Client". Also registry editor, I watched HKEY_LOCAL_MACHINE-> SOFTWARE-> VMWARE, INC.-> VMware Virtual Center-> DB. Data on 'Vmware VirtualCenter' next to '1' and '4' is set to "SQL Native Client".

  So, how can I determine if the database used is not MSDE?

  Sorry for the stupid question, but I'm not so much with the databases...

  Thank you.

  Den...

  > So, how can I determine if the database used is not MSDE?

  MSDE does not remote databases.  ODBC Open, click System DSN, click Configure.  The listed database is that it uses, and if that is the name used for virtual center, this is the database in use.

• Deploy Windows 2008 Server X 64 reviews of model with customization on Virtual Center 4.0 using the ESX 3.5 hosts

  Deployment of Windows 2008 Server X 64 system of operating invited by using hosts Virtual Center 4.0 and ESX 3.5 implements a message telling me:

  Cannot deploy the model: customization of the

  guest operating system "winVistaGuest" is not

  supported in this configuration. Microsoft Vista

  (TM) and Linux with Logical Volume guests

  Manager are supported only for the recent ESX host

  and versions of VMware Tools. Refer to vCenter

  documentation for taken configurations supported.

  error

  This isn't just normal? Just today I upgraded to VC4.0 to be able to deploy my new servers based on findings on this forum. And no matter if I change the Machintype Vista x 64 or elsewhere Vista32 (what is wrong of course). Any other gopt experience with this?

  There should be no need to upgrade to vCenter4 just to be able to customize a W2K8 Guest.  We vCenter 2.5 and have no problem.

  Take a look at this KB

  http://KB.VMware.com/kb/1010449

• Test of Vmotion using virtual center

  Guys,

  I've finally put together two esxi hosts and want to test vmotion, etc..  When I tried to download the virtual Center, I get this message below.  They no longer offer free trial version?  VSphere replaced it?

  I'm runing esxi version 3.5 build-110271

  Thank you

  TNT

  -

  ---

  VMware vCenter Server 2.5

  Sorry, at the moment you are unauthorized to download VMware vCenter Server 2.5. You have the following options:

  • If you have a serial number valid VMware vCenter Server 2.5 and you don't him is not registered, please register it here, so you can get access to download.

  • If you want to get more information about VMware vCenter Server 2.5, please contact VMware sales department [email protected] or by phone 1-877-4-VMWARE.

  The question is that VMware wants you to move to vSphere for you is no longer can down load VI - 3 licenses without proper license - if you want to test vCenter in the VI-3 Please contact sales for VMware environment and they should be able to get you a copy for evaluation purposes.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful