Similar Questions

• change virtual center with a new

  This is my first post, I hope it's the right place and that someone could help me. I have 6 esx 3.5.0 and 1 vc 2.5.0

  I host more then 5 and 50 vm and I saw this problem http://communities.VMware.com/docs/doc-3290 so I installed a new virtual Center 2.5 u5 to migrate MS sql 2005 express to MS sql 2005 sp2 standard, are both VMs.

  I don't want to migrate the data (see above second problem), I want to restart with own db, I recreated the cluster and now I want to migrate the new hosts and virtual machines in former vc.

  I do not understand whether it is enough:

  to DISCONNECT the hosts and then reconnect it to the new Victoria Cross.  When I have reconnected all hosts, I could disable old VC

  or

  turn off the virtual machines then REMOVE the host from the cluster on old vc, then add new host on cluster on new VC, then turn on virtual machines

  This second choice is very difficult because I need to turn off all my virtual machines, and it is not so easy in a production environment!

  this assistance is useful, but it's with db migration http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 5850444 that I don't want to.

  If there is an easier choice, it's better! http://communities.VMware.com/images/emoticons/wink.gif !

  You can vmotion the comments ok?  I do not think that the service starts do not ssh is related to your work that you do.

• Cannot access the virtual center with web access

  Hello

  I can access my ESX hosts without problem using web access but I can't access the virtual Center.

  I put https://hostnamevCenter

  I go as far as the home page and once I click on web access connection I get the following error:

  '503 service unavailable '.

  Any suggestions? Is web access configured automatically for vCenter or what I need to do something more?

  Thanks in advance

  Hello

  Check this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1009291

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• Using WINDOWS MEDIA CENTER WITH YOUR KEYBOARD, BUT WAS so SLOW!

  I'm under full and 32-bit Windows Vista Edition without service pack, and it's so SLOW!

  Even he soon in MEDIA CENTER!

  Narrator read the buttons I pushed on and it WAS so SLOW!

  My father was so angry and it IS SLOW!

  Can you help me run SP2 on my computer?

  Hi again.  Question: what would these updates have been?  If you don't remember, open Windows Update, click on "see the installed updates" and more recently installed report with updates.

  As I already said (maybe bad), Windows Update not immediately offers you Service Pack 1.  There are quite a few Windows updates that must be installed before WU will offer you the service pack.
  There is also some (including some audio drivers Realtek) drivers that are known to cause problems with the installation of SP1; Therefore, WU do offer you the update until these drivers are updated.

  Here is an MS article explaining why (and bugs):
  http://support.Microsoft.com/kb/948343/en-us

  I would like to repeat that the three updates, I mentioned in my first post are prerequisites for SP1.  Theyneed to be installed first and in the order displayed.
  Again, check your Windows Update history for these three KB numbers.  If you don't see one or several of them installed, you can find with a quick Google search.  ;)

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Protection of unique virtual machine with SRM

  Hello

  I am new to SRM so please guide me, I Site A and Site B, the two sites has 4 to LUN with SAN EMS replication, this LUN has 4 virtual machines, (A, B, C, D), as does the replication SAN and that LUN is protected, Protection Group covers all 4 VM, if one of my VM falls down on the main site I can only start that failure on site rather count all 4 virtual machines of the failover.

  Concerning

  Usman

  srm_admin_5_0 should provide you with data.

  See "creating Protection groups and.

  Section of replication of Virtual Machines.

• Using Exchange Admin Center with a server Exchange 2012 - R2 upgrade CU 8 in Chrome

  Hi all

  Having problem with Exchange Admin Center in Chrome.

  Maybe in relation to https://support.microsoft.com/en-us/kb/3001145

  I have EAC (Exchange Admin Center) through Chrome, the latest version 50 something, installation details for the transfer of a mailbox click Save after all details are entered, including recipients limit, open the mailbox details save and lo does here, no data has been saved.

  EAC works perfectly well on Firefox and IE 11.

  As stated in the title, the Exchange Server is Windows Server 2012 non - R2 upgrade CU 8 2012 updated of all the necessary server

  Now, I know that I am behind the curve for CU; I have here been hired recently, learned the system and were reluctant to make major system changes until I could get a feel for the network.

  What I'm looking for is for verification if I update to 12 CU, this resolution of my problem? I would spend on Firefox, the default browser, chrome.

  Any help is much appreciated, thank you.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• I get an error "fix computer clock" when I try to use windows media center with netflix

  I downloaded the software you need to watch your netflix on Windows Media Center. Once I'm inside the Windows Media Center, I click on Netflix, my user name and password for netflix pops up, then I think that enter to go... I get an error message that says "Please update the computer clock you and or update your timezone. '. Both are already up to date, but I get this error message.

  Check your time zone. If all goes well, then it's a question with netflix. You can contact the support of netflix.

  Alternatively, you can try to reset your information newspaper: -.

  http://www.hack7mc.com/2009/11/resetting-Netflix-login-information-in-Windows-Media-Center.html

• How to use WebEx Meeting Center with MX300 G2

  Hi all

  We have telepresence infrastructure following implementation and work:

  -VSC Highway

  -CUCM

  -IM & presence server

  -Telepresence Server

  Can to sign up customers Jabber against Expressway, have put in place all records DNS etc and all this side of things works well.

  We also have our G2 MX300 on Expressway and it can make internal calls to Jabber client etc.

  We are now trying to get the G2 MX300 connected to our WebEx Meeting Center () account, so that we can join the meetings on the G2 MX300 and see the meeting schedule using the 10 "telepresence touchscreen etc..

  Can you please give us a clue on how we get WebEx works on the G2 MX300?

  Thank you very much

  CMR Hyrbid Configuration Guide, Note this requires Cisco Advanced Services or partner Cisco qualified to perform the implementation.

  CMR cloud is just an addon service WebEx Meeting Center.

  Cloud of CMR uses Cisco's TelePresence infrastructure in the cloud to do throughout the Conference, while Hyrbid will use your infrastructure on site.

• Deploy Windows 2008 Server X 64 reviews of model with customization on Virtual Center 4.0 using the ESX 3.5 hosts

  Deployment of Windows 2008 Server X 64 system of operating invited by using hosts Virtual Center 4.0 and ESX 3.5 implements a message telling me:

  Cannot deploy the model: customization of the

  guest operating system "winVistaGuest" is not

  supported in this configuration. Microsoft Vista

  (TM) and Linux with Logical Volume guests

  Manager are supported only for the recent ESX host

  and versions of VMware Tools. Refer to vCenter

  documentation for taken configurations supported.

  error

  This isn't just normal? Just today I upgraded to VC4.0 to be able to deploy my new servers based on findings on this forum. And no matter if I change the Machintype Vista x 64 or elsewhere Vista32 (what is wrong of course). Any other gopt experience with this?

  There should be no need to upgrade to vCenter4 just to be able to customize a W2K8 Guest.  We vCenter 2.5 and have no problem.

  Take a look at this KB

  http://KB.VMware.com/kb/1010449

• How to check what database is used by VMware Virtual Center?

  Hello

  I recently inherited a small environment and I was asked to upgrade ESX 3.5 to ESX 4.0. I'm not a person from the database, but how can I check what database is used by VMware Virtual Center? According to the guide to upgrade the MSDE database is not supported in ESX 4.0.

  I want to just make sure that we did not use this database. I looked in the ODBC Data Source Administrator. Thanks to the system DSN, I saw that the drivers for Vmware Update Manager and Vmware Virtual Center are "SQL Native Client". Also registry editor, I watched HKEY_LOCAL_MACHINE-> SOFTWARE-> VMWARE, INC.-> VMware Virtual Center-> DB. Data on 'Vmware VirtualCenter' next to '1' and '4' is set to "SQL Native Client".

  So, how can I determine if the database used is not MSDE?

  Sorry for the stupid question, but I'm not so much with the databases...

  Thank you.

  Den...

  > So, how can I determine if the database used is not MSDE?

  MSDE does not remote databases.  ODBC Open, click System DSN, click Configure.  The listed database is that it uses, and if that is the name used for virtual center, this is the database in use.

• Virtual Center Server

  Hello

  I would just like to double check that we plan to do the following:

  We want to upgrade to vsphere 4 and the first thing we will do is virtual Center upgraded version 2.5.0 in the virtual center of vphere.  After that, it may be a month or two before upgrade us the hosts.  Is there a problem to do this way?  The virtual centre of vsphere 4 will work without any problem with esx 3.5 hosts.  Users will be able to use the new vi client and connect, manage and make existing tasks with the guests of 3.5.

  The existing virtual server is the license server.  I guess all I have to do is update the virtual center with the new license?

  Thank you

  The license server will not disappear, so you just need to keep it around your 3.5 hosts, once they are gone you will add the key code in the vCenter for your other hosts, under settings-> licenses vCenter.  After the upgrade you will need the license for vCenter but not so much for ESX4 until you move in this way, then you can add them in.

  • Kyle

• Virtual center of PowerShell version vc

  Hello

  Can you help me to get the version of my virtual center with a powershell command.

  I ask this question because I have vc vsphere 4 and vsphere 5.

  When I connect to the virtual Center, I would like to know if I'm on a virtual center of vsphere 4 or vsphere 5

  Thank you for your help

  Hello

  (get-view serviceinstance). Content.About.version

  or

  (get-view serviceinstance). Content.About.Fullname

  If you work with the multi mode:

  (get-view-Server $global: serviceinstance DefaultVIServers [0]) Content.About.version

  returning to the first vc [1] for the second etc.

• using db even for srm as virtual Center

  Hello

  Is - this possible/supported the same external Oracle rac (11) to serve as srm database the virtual Center, using a different user, of course.

  Or should I have to create a separate database for Mrs?

  Thank you

  Peter

  Hi Peter,.

  SRM requires its own DB, since the SRM DB and the DB Server vCenter have requirements of the other schema. You can find the configuration requirements / information on the DB SRM in the creation of the SRM database in the SRM docs.

  Hope this helps,

  Stuart

  Documentation of SRM

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Update Virtual Center 5.0 to 5.1 (using Cisco Nexus 1000V)

  Need advice on upgrading production please.

  current environment

  Race of Virtual Center 5.0 as a virtual machine to connect to oracle VM DB

  3 groups

  1: 8 blades of ESXI 5.0 IBM cluster, CLuster 2: 5 IBM 3850 x 5

  2 cisco Nexus 1000v of which cluster only 1 use.

  I know that the procedure of upgrading to 5.1

  1. create DB SSO, SSO of installation

  2 upgrading VC to 5.1

  3. install WEB CLient set up AD authentication

  IT IS:

  I have problems with the Nexus 1000? I hope the upgrade will treat them as he would a distributed switch and I should have no problem.

  He wj, treat the Nexus as a dVS.