Using imac as my 2010 monitor 2007

Similar Questions

• Cannot use iMac 27 mid-2010 - yosimte - display target with mac pro 2009 - maviricks - well that I use the mini display cdmi Caron

  I have an imac 27 inch, mid-2010 and I'm trying to use it as screen target with mac pro 2009 and I do the step open two computer connect with cable - hdmi - mini display but has not detected

  I have mac with os x yosimete and mac pro have the mavericks

  According to the use of your iMac as a display with the target - Apple support display Mode, it requires a 'Mini DisplayPort to Mini DisplayPort' cable.

• Currently using iMac 2007 Yosemite 10.10.5 with 2 GB 667 mhz ddr 2 with 2.4 ghz core 2 duo with intel that I should upg at El Capitan

  Currently using iMac 2007 Yosemite 10.10.5 with 2 GB 667 mhz ddr 2 with 2.4 ghz core 2 duo with intel that I should upg at El Capitan.  Very slow system.  This improvement will speed up?

  In my opinion, unless you upgrade the RAM 6 GB. You can get a kit of RAM 6 GB OWC (www.macsales.com) or you can get a DIMM 4 GB + 2 GB of Crucial (direct purchase) and update the RAM. Your machine likely a 2x1GB DIMMS installed, however if she doesn't 1x2GB DIMM installed everything you need is a 4 GB DIMMS. Once you upgrade the RAM, then you can upgrade to El Capitan, when you upgrade, I think you'll be an improvement in performance. Although technically El Capitan (and Yosemite) will run on 2 GB, the user experience should be quite poor.

  Good luck.

• iMac 27 "mid-2010--> external display

  What Apple Display do I need to connect it to my iMac (27 ", mid-2010, only Mini-Display Port-connector).

  Can I use the Thunderbolt Display? I want to have a 2nd monitor.

  1. someone who can be adapted to the Mini DisplayPort.

  2 No.

  (143848)

• Re-install Snow Leopard to a notice of Imac I3 mid-2010?

  Hello

  I have already received some good answers in another thread, but it had a different title, so I thought that I post here and maybe some members will more experience with this:

  I just bought a used Imac which is currently being shipped to me.  Here are the specs: mid-2010 21.5 inches screen, model A1311, series: W8114294DAS, Intel Core I3 3.06 ghz processor.

  He will come running to El Capitan, but they advised me to wipe the drive and reinstall the original operating system, which is the snow leopard, and then upgrade from there to El Capitan, with my own Apple ID. However, it seems to be difficult with this particular model. If the computer is initially supplied with Snow Leopard 10.6.4. My drive of detail might not work for the re - install.  I was told that Apple would be able to ship me a custom. I've also read about yet another thread that maybe these models came with a slightly different version of Snow Leopard, and this is why the retail CD may not work, even if the computer came with version 10.6.3. and it would be better to get a custom. Is this true?

  Then there may be a problem with an update of the firmware that the computer may or may not have and which could cause problems (not allow Snow Leopard install at all, or instead to install Lion). Is it possible to say if he had this update and maybe disable it before attempting to erase and install Snow Leopard?

  Does anyone have advice/stories to share before I actually try it? Or what would be the best way to go about this? I thought that I would try my SL CD detail first, and I hope that it will work. Otherwise, I could order the CD on measure and try this one. If I can't erase, at least I didn't damage, but what happens if I erase the disc, but then failed to install Snow Leopard? I was left with a blank computer. Or I would be able to install it once the disc has been erased?

  Someone also said using SuperDuper may erase the disc elsewhere or at least to make a back-up? I have not used before. There is no personal information on the computer again, I would try to re - install before anything else, so I just need a way to install El Capitan under my Apple ID, then I'll be able to install updates, or even a new operating system, as it becomes available.

  Is there a risk to try to use my SL CD detail if it allows me to erase and install (such as the installation of the 'wrong' version of Snow Leopard)?

  Here is the link to the original thread: purchases used Imac tips?

  Thanks for any idea!

  You can try this much easier.

  1 - Connect to App store with your apple ID.

  2 - install download 10.11 - he will say that you have already installed just 10.11 to proceed.

  3. create a usb installation program.

  4 - start the installer - erase hard drive and install a clean copy of 10.11

  5. place the iMac with your apple ID.

  Create an installer for OS X - Apple support bootable

• iMac 21.5 "2010 running El capitan refuses to install silverlight

  I have an iMac 21.5 "2010 el capitan running, I tried to uninstall it reboot and install silverlight again and nothing it doesn't.

  It is said he has successfully installed and when you return to netflix or amazon says that you must install it.

  Thank you

  If you use Safari go to Preferences > Security > configuration of the Plugin and make sure that Silverlight is enabled and the value allow.

• iPhone 6 s 4 K video on iMac MacBook Pro 2010/2011

  If I take 4K video on my iPhone 6s and import it on my iMac MacBook Pro 2010/2011 will be playing the video and watch as she lets say a new iMac 4 / 5K?  iMovie and final cut PRO supports 4K video for editing right?

  It will look like at its native resolution. On your Mac, the displayed video will be reduced as a result of your visible area onscreen.  That does not mean the video will look terrible, but not so good that it would have on the 4 k or 5 k.

• How to remove my password to start connection using imac OSX EL Capitan 10.11.2

  How to remove my password to start using IMac OSX EL Capitan 10.11.2 connection

  Did you forgot the password?

  Or do you just want the mac connect to your account automatically, without you have to enter the password.

  I'm assuming the latter. If I'm wrong, let me know - there are also solutions for this.

  Log in normally and Access Preferences system-> users and groups. Click on the Options of connection at the bottom left. You may need to click the lock and enter your password to make changes. Change 'AutoConnect' from 'Off' to your account.

• Can I use the MBP as a monitor to a windows PC?

  Can I use the MBP as a monitor to a windows PC?

  N ° the MBP has no built-in support for this.

• Setup using LV Runtime Engine 2010 build error

  I had an executable and installer work which was built in LV2009.  Since then, I changed my source code and registered as LV version 2010.  I have rebuilt the executable, but when I tried to run it on the target computer, I got an error message saying that it had LV Runtime Engine 2010.  So I tried to rebuild the installer using LV Runtime Engine 2010 as an extra Installer.  However, this version was missed and I got a long error msg that I don't understand (see attached).

  Thanks in advance.

  See this knowledge base article . There are a few possible solutions listed.  Let us know if these don't work.

  Error code - 12 creating an installer of LabVIEW or LabVIEW SDK installation.

  http://digital.NI.com/public.nsf/allkb/afc375154efbd6ae8625760b005fb723

• When we try to use our multipoint system 2010 with more than 2 users the mouse around the screen to move.

  Original title: problems using multipoint server 2010.

  When we try to use our multipoint system 2010 with more than 2 users mice become uncontrollable and move the screens themselves. How to fix this.

  Hi thomasgk,

  The issue of Windows Multipoint Server 2010, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I have Windows Vista, can I use Microsoft Windows Office 2010

  I have Windows Vista, if I can use Mirsoft Windows Office 2010 is compatible with Windows Vista?

  Hello Irene 67,

  Here are the supported by Office 2010 operating sytems. Windows Vista SP1 is included.

  What operating systems are supported?

  To determine which operating systems would be financed for Office 2010, we have prioritized based on usage statistics for a given operating system, as well as design costs associated with ensuring compatibility and support of customer for this OS. The following tables summarize the OS for Office 2010 compatibility.

  

  

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Using a badge TV as monitor in Windows 7

  So, I got my computer in XP using my Insignia TV as a monitor using a VGA cable. I have a machine of windows 7 I would like to replace the XP machine with. The windows 7 machine works very well on my screen 19 '' little but when I try to use the TV as a monitor I get no a message of the TV signal as soon as I should get to the login screen. I updated my video card drivers (the last update has been less than a month) and changed my resolution 1024 x 768 and still no luck. If I start in safe mode and disable my graphics card it will work, but then I can't play games or enjoy my video card. Any suggestions?

  I'm done with an HDMI instead of VGA cable and it worked. If you do not have an HDMI output on your graphics card seems as if you were out of luck.

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?