using printer hp 4620 fax via wifi

Similar Questions

• I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  No, because if you bought a new iPhone, then you need a SIM card to activate it before you can use the wifi applications.

  This is a phone after all, you don't need a sim card any to be able to activate it.

• Windows 7 box impossible to see or to print to the 8600plus via WIFI

  Hi all

  Two days to work on this issue and I am puzzled. Here's what I past Windows 7 box connected via cat5 to switch 8600 more connected via wifi. All other contracting parties times hard wired or WIFI print. Win 7 box can see all PC and network devices on the net at home (and view the shared files) just not the 8600 (also box can not ping to the address given for the 8600 dhcp). I checked Norton does not block the printer scanner and also tried hard not defining the ip addy of the printer in the wizard go. What I'm going to try tonight is to hard wire the printer from the box and see if things are getting better but it is a shared printer and must reside in a central location. ALL the thoughts in this matter would be greatly appreciated, I'm at my end of strings with something that should be and easy plug and play.

  Thank you

  Terry

  Fixed the problem of restarting the bitch switch. Everything works very well sorry for any loss of time.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• HP Deskjet F2410: How to print using a normal printer with just a smartphone Wifi

  Hi Experts,
  
  I tried to print from my normal with a printer HP Wifi Android smartphone but do not work even though when I installed print
  Apps. I know it's because my printer is not just a Wifi wireless printer is if there is a way for me to print documents using my normal printer? What should I do?
  
  Waiting for your answer, thx
  
  Have a wonderful day,
  Jerica

  Thanks for posting the question.

  In law, there is no support if the printer is not wireless.

  But some forums States that it can be done via OTG cable. I suggest you buy active wireless last printer.

  It might be possible to implement. It seems that the phone and the operating system has the means to print pre-installed. You also have a good OTG cable.

  Ensure that under settings > impression that the HP plug is installed and turn it on. If you do not, there are the PlayStore. Plugin of HP Printing Service< -.

  After that, just the connection to the telephone cable and the printer will allow you printed media.

• When you try to print photos or turn them into a book, I constantly get the message that I 'am not connected to the internet"when I am clearly, via wifi.

  PHOTOS, Version 1.3 often gives me an error message "you are not connected to the internet" when I am clearly, via wifi.  This happens when I try to print a photo or to place pictures in a book.  (It also happens when I ask to export a photo on the desk, but then it is exported, despite the error message.) In the preferences of pictures, I chose "download the originals of this Mac", but the problem seems to be when the photo of the cloud recovery.  My operating system is up-to-date: 10.11.3.  My desktop Mac is mid-2010.  I take quite a few photos, and maybe download them to the cloud and then download them to my computer takes a long time.  That's the only explanation I can find.

  You have activated the iCloud photo library and selected the option to optimize the photos in your local library?

  If Yes, then the Photos is a download full version size for use in the book, print, or share via email, etc.

  

• Connection app to print via wifi Android Tablet for printer HP Officejet 5740

  I have trouble getting the application "All in one remote control HP" to recognize my printer when connected via wifi. I have no trouble getting the 'HP eprint' app to work. I want to use the previous application as it scans and prints. Also how to print wireless an article on the web when you use Google's browser or even save it to a download to print later. I'm old so need help please

  Cariad says:
  

  Yes. He says DIRECT then the name of the printer

  Hello

  Yes, that means that it is there, is it connected ? If not, you need to set up to enter a pin code which is located on the printer control panel.

  Kind regards.

• Is it possible to fax a document from your desktop via wifi at all in a single modem for fax printers?

  Currently, I have 2 all in printers connected to my wifi.  Is it possible to open a document on the desktop on my iMac and fax using the built in fax modem or another of my all in printers?

  If the producer of the printer is a driver for OS X that allows faxing then I don't see why not

• I get "printer does not ' when I try to print via WiFi. Everything seems to be set up properly

  I went through setting up to print via WiFi.  When I try to print I get printer not responding do not.  When I boot I have a message "the printer is online."  I get a box showing that I am low on ink.  I can use the features of scanning from my laptop.  I can't print.

  I have a printer Canon MX882

  Lloyd

  Hi Lloyd,

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. what security software is installed?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  We can refer to this article and check if that helps.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• Faxing via wireless HP OfficeJet Pro Premium 8600 - Win 7 64B

  I'm trying to fax directly from my computer using my P 8600 installed via Wireless.  Printing works fine, faxing from the itsewlf of the printer works fine, just trying to go green.  The driver shows Fax - HP OfficeJet 8600 network, Sami that the printer is configured, but I get the Sendfax error - cannot communicate with printer when faxing. What I'm missing here.

  Hi Brian-DS,

  When you did uninstall it and reinstall, did you use a download from hp.com for the re - install?  Otherwise, you could try doing a complete uninstall and then use a download from hp.com for installing the driver.  Click here

  If this does not help, I recommend you contact HP to Contact HP worldwidesupport.  They should be able to help understand you what is happening.  It would be good if the agent is able to your computer remotely and all check.

  Let me know what happens.

• 320N crashes when you try to transfer data via wifi

  I have the 320N and I am very frusterated.  I would just take it, but I bought it new on Amazon.com, which means I have to pay shipping because I threw away the box and the return shipping of RMA form!  I don't even know if Amazon bring it back without this paperwork, but still the question...

  I have not yet all maps N, but I upgraded to this router because my home internet service is faster than what my old WRT - 54 g could deliver.  This new router performs routing and I can now achieve the nominal speed from my ISP (50 / 10 Mbit/s).

  Can I transfer large files 6 + GB WIRED between one of the LAN ports on this device.  However if I try to transfer more data on wifi, the router simply will stop.  The lights on the front work well, they Flash as there is activity and power light is solid, but it will not pass traffic and SSID wifi disappears.  I run a continuous ping to the router (192.168.1.1, ping - t) and I get<1ms replies.=""  on="" my="" laptop="" i="" initiate="" a="" download="" of="" a="" 1gb="" file="" which="" is="" shared="" in="" my="" windows="" 7="" homegroup.=""  within="" a="" minute="" or="" two="" the="" constant="" ping="" to="" the="" router="" starts="" timing="" out.=""  internet="" access="" to="" anything="" (wired="" or="" wireless)="" instantly="" ceases.=""  new="" introduced="" devices="" will="" not="" grab="" a="" dhcp="" address.=""  existing="" pc's="" whom="" already="" have="" their="" dhcp="" address="" can="" talk="" to="" each="" other="" only="" if="" wired.=""  the="" wireless="" transmitter="" stops="" broadcasting="" the="" network="" and="" devices="" no="" longer="" see="" it="" on="" the="" airwaves.=""  the="" only="" way="" to="" fix="" it="" is="" to="" power="" cycle="">

  It doesn't even have to be a large file via wifi to transfer.  Earlier as I type this post that I noticed the constant ping my other monitor started timing.  I have pedaled power the router in time for me to run for this position.  In fact I had to do it three times in the time it took me to write this post.  It's the most frustrating experience I had with a wifi router/ap, and I play with Cisco equipment at work running IOS real.

  Here's what I've tried so far.

  Reset the default settings by pressing the rear reset for more than 30 seconds button.

  I can confirm this resets the default values as password and all the other settings are default return.

  I tried WPA2 Personal.  I tried WPA.  Router blocks always.

  I tried with all the default settings.  Router blocks always.

  I have reset the router repeatedly.  Always freezes.

  Power cycle it for more than a minute.  Always freezes.

  It with the latest Linksys firmware reflash.  Always freezes.

  What should I do next?  I have a feeling that it is the same problem as in a lot of the advice of HP printer firmware.  This problem is bad solder on BGA CPU connection.  The difficulty that you put the formatter Board in an oven at 400 degrees for 5 to 8 minutes.  After this time let you cool at room temperature.  The oven heats the bad welds enough so that it assigns and gets a better connection.  There are hundreds of messages of success on that.  I also hear that the solder connection problem exists for many of the older game consoles review Xbox 360 causing the infamous "Red Ring of Death".

  So should I try to fight with Amazon for it back and eat the shipping costs?

  Can I cancel my warranty, open the unit and put it in the oven?

  I buy another router from a store, but then put it in the box and take it back?

  I just cut my losses?

  I just use this as a wired router (turn off Wifi) and plug in my WRT - 54 g and the brand that act as an access point?

  Thanks for the tips.

  Well, since it's only a week, Amazon sent me a new.  I just ship this one back in the box they send.  As long as they get it in 30 days I will not be charged.

  This one is def. a dud.  Hope that the next one works much better.  The first thing I do with there is a 1 GB transfer file and see if it freezes.

• HP Photosmart 8000 A809 printer offline connects to the Wifi network

  My printer would sometimes disconnect from wifi, but by turning and the new, would solve the problem.  Now, I can not connect via wifi at all.  Diagnosis plug said: I'm very good signal strength with odds of PASSAGE on everything, no other corresponding network mine.

  Config with the correct network name and an IP address of 10.10.10.125.  I tried the USB connection and then converting to wireless, but establishing assistant gets as much as setting her up and recognizing the device, then I get this msg:

  NON-CONTACTED DEVICE

  The network configuration has been correctly transferred to the device. However, to continue to configure the network device, your Mac must have access to the device. So please make sure that your Mac has access to the network: "JC XXXX" and try again.

  Yet, the report says that I'M connected.  When I try to print something the msg happens "printer is off-line" still the blue light is on, and as I said, all diagnostics PASS.

  I turned everything works, including unplugging the router several times, restart my mac etc.  I'm not missing any software updated.

  I tried the suggestion of hp to put my IP address in my browser to access the Networking tab, but Google Chrome tells me that it can't find the address.

  I also reset the printing system.

  What else can I try to fix this?  Grateful for your suggestions!  Thank you!!!

  Looks like you have problems multiple) a printer goes offline and then b) you can not access the IP address of the printer and c) you get an error saying 'Inaccessible device.'

  What is the Mac version that you use to configure the printer? You're on a VPN or proxy?  Is the printer on the same network as the computer?  You have blinking lights on the printer?

  Here is a very comprehensive document that covers everything you need to do to get the configuration of the printer.  I recommend restoring the printer by default and then try to connect again.  Page 76 of the User Guide talks about what to do if you are unable to access the built-in web server