Windows 7 box impossible to see or to print to the 8600plus via WIFI

Similar Questions

• Software to insert text in a photo and then take pictures of Windows to copy on an external USB to print at the pharmacy. Thank you

  You know a software product to insert text in the photo and then take pictures of Windows and copy on an external USB to print at the pharmacy. Thank you

  To achieve this product is Adobe Photoshop http://www.adobe.com/products/photoshop/family/.  This not only allows you to do, but allows you to manipulate pictures in almost any way you choose above all.

  If you are looking for a less expensive solution (although nowhere near as functional), then Microsoft Photo Editor free http://www.brothersoft.com/downloads/microsoft-photo-editor.html will probably do the job for you.  In addition, you can try the free Microsoft Office Picture Manager 2003 to http://www.brothersoft.com/microsoft-office-picture-manager-171868.html.  I suggest that you try the free options to determine if it meets your needs before you spend money on Adobe Photoshop (as good as Photoshop is).

  All these programs have the ability to record in a variety of formats - certainly, including that which can be handled by your local drug store (call them to check to determine what types of extensions that they can support and don't forget to use this format when you are working with your photos).

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• Homegroup impossible to access shared files/printer on the member computer

  I have a group residential, put in place.  However, I have a computer on the homegroup that I cannot access its files little matter how many times I change file sharing settings.  In addition, this computer I cannot access the printer connected to it.  Then first set up on the homegroup we could access the files and printer on the capricious computer.  Please help beyond obvious parameter changes.

  4 computers in the homegroup

  The name of the all homegroup computers

  All computers 'workgroup' home together

  All homegroup computers use Windows 7 Ultimate 64 Bit, Windows 7 Professional 64-bit (used to create the homegroup), Windows 7 Home Premium 32-bit, Windows 7 Home Premium 32 Bit.

  The homegroup initially worked correctly for all computers.

  Windows 7 Ultimate 64 bit developed computer a blue screen of death. After windows repair, this computer can see/use homegroup, access the other folders/files, but no other computers in the homegroup could access this computer or the connected printer

  Hi Maroonsapper,

  1. what exactly happen when you try to access the shared folder? You receive an error message or error code?

  2 did you do changes on the computer before the show?

  I suggest you to read the following article on the sharing of files and libraries in a homegroup:

  Video: Sharing files with homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

   

  Share libraries with your homegroup

  http://Windows.Microsoft.com/en-us/Windows7/share-libraries-with-your-HomeGroup

  You can also see the following article for more information about homegroup:

  Access to files and printers on other homegroup computers

  http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers

   

  Why can't I access my homegroup?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  Let us know if that helps.

• How to connect a Windows 7 pc to a Business Inkjet 2800 printer over the network.

  We change Windows XP proffessional x 86 to 7 x 64 Enterprise, and our printers, Business Inkjet 2800 (3 of them) is part of our network. I understand that no drivers are available, so my question is how do we install them? If it's a driver OS, which one is it?

  It seems that your printer is a commercial product.

  You can get a better response by posting in the trade forums.

  http://h30499.www3.HP.com/T5/printers-DeskJet/BD-p/BSC-415#.UGThUE3A9-c

• Impossible to delete or add songs to the iPhone via iTunes

  Dear all,

  I'm with my previous iPhone (5s) as a music player - or trying to.

  My problem is that when I try to delete or add songs through iTunes, I can't.  The "Delete" option is grayed out, outside, on the Edit menu, and - in short - any attempt to delete the songs "on my device' has no value.  To add songs through drag-and-drop using manual synchronization is just as ineffective.

  Further: many of these songs on my device is dimmed, as if caught in Mid-sync.

  I deleted all the music from the device itself, but it still shows upwards as shown above in iTunes.

  I use iTunes 12.3.2 what I understand is the latest version.  For the record, this is on a Mac Pro Mavericks (10.9.5) running.

  Any suggestions (Googling the question is not useful) would be most appreciated.

  https://discussions.apple.com/thread/7163823 - if you subscribed to Apple music or iTunes game, you will not have to run manually or synchronize music on a device in iTunes. Synchronize your music is made by iCloud and all of your eligible music should appear there. Movies can always be synchronized.

  A little more on this subject and a few options - https://discussions.apple.com/thread/7194995 and: move content from iTunes on your computer to your iPhone, iPad or iPod touch

  - https://support.apple.com/en-us/HT201593

  and a workaround - https://discussions.apple.com/message/28842873#28842873

  If you haven't signed up for one of the iCloud based services:

  https://discussions.apple.com/message/28481661#28481661 - "synchronize your music changed in iTunes 12.2.0 and iOS 8.4 music App."

• HP Officejet Pro 6830: 6830 windows 8 8.1 cannot print from the windows test page

  When it is connected to 'own' windows - it prints OK.

  When it is connected to the windows where are the normal software like office, autocad, adobe and so those installed, the printer does not print anything - test page from printer properties is the first problem that means...

  Only "free software priter" is able to print something (test pages and so one) also print doctor and installation wizzard prints what it can, but not possible 'to normal windows print"... :-(

  It is tested on:

  Software for laptop - Win 8 Pro - installed - no. PRINT

  Surface 3 Pro - Win 8.1 - software installed - no. PRINT

  Laptop - 8.1 Pro - clean shop - PRINTING POSSIBLE Win (after installation of the driver full download - in a test with autopilot installed it does not print)

  Virtual - Win 7 Ultimate - installed software - PRINTING POSSIBLE

  (installed software means office, autocad, adobe,...)

  It seems that some components of system installed with one software disables printing from windows.

  When looked at open before printing to the printer - it shows the print job (which is not printed) for 0.1 second and nothing is displayed - also when the printer is paused - it shows the work and it is deleted immediately - left must work until the printer not suspended...

  It is not a firewall issue (tested), it has been tested on: USB, WiFi, LAN. No way to print something from windows 8 and upwards.

  seems that it has something with the option run the program as administrator.

  tested on some programs - autocad, adobe, word excel,... - when run as administrator it prints OK.

  If you do not have the option in the context menu try to hold Shift before made a - right click and run as admin

  It's odd - some print settings are transferred with work, for example, winword impression (office) without admin - PDF Factory (virtual printer) - rights and then to the physical printer 6830 - he can't be printed to PDF Factory

  But if you start winword as an administrator - so you can print directly or through PDF Factory hassle

  ---------------------------------------------------------

  Personally, I see this as a big mistake by Microsoft - that something like this can happen - simple direct printing is not possible after you have connected the printer... :-(:-(:-(

• 2600n: printing on Windows 10 always prints to the file rather than to my 2600n

  I bought a new laptop which had 10 (64-bit) Windows installed already.

  When I connect my 2600n printer to the laptop via the USB port and attempt to print anything, the print function recognizes the 2600n is available, but the software behaves as if I chose the option to "Print to file" instead of send data to my printer.

  On the Microsoft Web site, I tried a Windows 10 compatible driver for the 2600n.  I had to download the Microsoft Update catalog that I searched.  The catalogue lists the 2600n, but it does not list Windows 10 like it in support.  The latest version of windows that supports 2600n is Windows 8.1.

  HP has a driver for the 2600n that works on Windows 10 (64 bit)? ... or where can I find?

  I noticed that my 2600n is not the default printer.  Even though I chose the 2600n for the print operation, Windows 10 boiled corn have a bug in the driver and it always sends to the default value.  The default is to print to a pdf file.

  3 times in 3 different ways, I tried to change the default printer to the 2600n and my attempts have been ignored.
  The 3rd time, it looked like it changed the default printer of what I wanted, but when I went to use,.
  It's the same old problem.  Then I left the print operation and came out from the browser where
  I tried printing and did something else.

  I used the NotePad editor later, when I thought I would try to print something new and this time it worked.

  Apparently change the default printer has not taken effect properly and I had to get out of the service where I was doing printing before it would work.

  So the solution is to change the 2600n to be the default printer... and wait a little and do something else.
  out of everything you did before you try again.

• Computer Windows Vista is unable to see the Boxee Box or Windows 7 computer.

  original title: network sharing

  I have a Windows Vista-based computer, a Windows 7 computer and a Boxee Box from d-link.

  The windows vista machine is set up for sharing, but I thought that you should choose what is shared.  I'm not able to see the Windows 7 machine or the boxee box to share with... This is due to the different operating systems?

  When I implemented the boxee box he showed all the shared files when I couldn't see the device to share... why?

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------
  

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

• Photoshop CS3 - small impossible to see toolbars / Hi DPI support / 10 Windows

  I have a full registered copy of Photoshop CS3, which works fine on my old PC with Windows 10, but on my new laptop with a screen high resolution, Photoshop tool bars are incredibly small and impossible to see. I see many others on these forums have had similar problems with more modern versions of Photoshop, but generally Adobe has not provided a solution. After a phone call to customer support hours (and I say well HOURS) on the online chat and make sharing screen with Adobe, they always tell me to refer to these forums, so now I write myself out of frustration. Does anyone know how to set the toolbars and other icons in Photoshop CS3?

  It took hours them because they refused to give me any kind of support because I wasn't asking them on a current Adobe product. After talking with 4 different people, that I finally got someone who wanted to tell me just that - CS3 will not just high resolution monitors. Although I did not like the answer, I thanked the last guy to talk to me at least my problem. Just wish someone would could tell me only hours earlier. Anyway, surprise happy ending: the latest update of Windows 10 solved the problem and I'm good to go! The bottom line is not based on the Adobe customer service except if you pay monthly subscription fees to their latest products!

• Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

  System information:

  Tactile Lenovo Y50-70

  Construction of 10.0.10586 of Windows 10-10586

  iPhone 5 c - iOS 9.2.1

  iTunes - 12.3.2.35 / 64-bit

  Cell carrier: Etisalat AF

  Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

  I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

  Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

  I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

  Please tell us what should I do to solve this problem.

  Thank you.

  OK, I finally understand how to solve this problem.

  I was able to understand because of this post:

  https://discussions.Apple.com/message/29267225#29267225

  The problem is that Windows 10 was not install appropriate drivers for my iPhone.

  You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

  However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

  So, how to fix this?

  Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

  Make sure you have the files box to include under verified.

  Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

• Program windows not fully displayed - cannot see the buttons

  Problem:

  1. After selecting the program HP PC Recovery CD/DVD Creator, the Welcome window appears but is not displayed entirely.  The portions and right at the bottom of the window are transparent.  I don't see other buttons that I should be able to select.  I also try to use the program end button (red box with white x) located on the top right of the window, and the program will not end.  To close the program, I have to finish the process via the Windows Task Manager.

  2. when the HP automatic update alert window returns to the part at the bottom right of my office, letting me know that updates are available and to ask if I would like to install the updates, the alert window is not completely visible.  I don't see other buttons that I should be able to select.

  3. in both cases (1 and 2), if I place my pointer over the window and select Enter then the program will proceed to the next step.  If a pedagogical (pop-up) window on the top of the main window of the program, I am able to see this pop-up window in its entirety, and then select options as needed.

  Question: What is the cause?  How can they be corrected?

  Thanks in advance for any input.  Please see information system below.

  -Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  Hello

  It is a known issue and the difficulty there is in the link below.

  http://support.HP.com/us-en/document/c00595956

  Hope this helps for you...

• "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

  Hello everyone,

  I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

  The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

  But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

  When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

  Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

  Thanks in advance for your help.

  If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

  Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

• Windows Installer box popping up

  Windows Installer box continues to appear, takes a long time to go, if it does, can not cancel it. Pages don't is not loading and it freezes everything up.  Help, please!

  Hey DariSue,

  o the operating system that you are facing this problem?

  o you get pop-up window during execution of any specific activity or during any specific time?

  o also what message you get with the pop-up?

  Follow these two steps to solve the problem.

  Step 1: Unregister Windows Installer and then reregister Windows Installer.

   

  For more information on how to start with this in Windows XP, see method 1 of the article in the Microsoft Knowledge Base: How to resolve common "Windows Installer" problems

  For Vista and Windows 7, follow these steps

   

  a. click Start, type cmd, right click and select run as administrator.

  b. type the following commands and press ENTER after each command:

  msiexec /unreg

  msiexec/regserver

  Step 2: upgrade Windows Installer to the latest version

   

  Windows 7 already has the latest version installed. You can upgrade the version of readers Windows Installer 4.5 install if you have XP or Vista installed.

  Get the download here: Windows Installer 4.5 Redistributable

   

  Please, check the system requirements before installing.

  For more information, see: box Windows Installer warning popping up.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to call windows dialog boxes

  Hello

  I just want to know how to call a windows dialog box, I called below the dialog using VB script and the script is the following lol = msgbox ("Your Message here", 19, "Your title here") and save it as a .vbs file, by changing the number "19" in the script to generate the different dialog box. And I think it is called by the user32.dl of windows.

  So can you please help me to call the dialog even in labview.

  

  Thank you & best regards

  Samuel J

  System engineer

  CAPTRONIC systems Pvt Ltd

  Bangalore, India.

  See attached VI calling MessageBoxA from user32.dll. Sorry for french labels, comments and the description...

• How to disable windows install box pop-up?

  I tried to update my old professional windows of office 2003 with a new program of release for consumption of office 2010 windows for teachers. For some reason, I kept getting the message that couldn't be improved until I deleted the old windows desktop programs. I tried to do, but some of them would not uninstall then I got frustrated and gave up. I used system restore to go back to the way my system has been configured before I tried to remove the office 2003 programs. Now regardless of the program or an application I try to use windows pop up box appears and intereferes with start of program and demand. I do not have to install anything. After the system restore, I checked and everything I had previously uninstalled seems to be back now. Whis is happening?  Does anyone know how to prevent installation pop box appearing whenever I try to use a program? I would really appreciate anybodys help on this one. Thank you all.

  Hello Airforce1974,

  You probably see the effects of a partial uninstall of office 2003. I did some checking and found that you can download and install the "office 2003 edition resource kit" (ork.exe) from the link below. "" It contains the "Remove Office Assistant"

  Note: I suggest that you first try to locate the office Removal Wizard to see if it is already installed (not deleted)

  http://Office.Microsoft.com/en-us/Office-2003-Resource-Kit/Office-Removal-Wizard-HA001140177.aspx

  To find the tool, click the Start button, point to programs, point to MiMicrosoft Office, point to Microsoft Office Tools, point to Microsoft Office Resource Kitand then click Removal Assistant.

  ORK. EXE

  http://download.Microsoft.com/download/0/e/d/0eda9ae6-f5c9-44BE-98c7-ccc3016a296a/ORK.exe

  Click on the link below for the tools included in the "office 2003 edition resource kit"

  http://Office.Microsoft.com/en-us/Office-2003-Resource-Kit/CH001149686.aspx

  How to upgrade office 2003 to office 2010

  http://answers.Microsoft.com/en-us/Office/Forum/office_2003-office_install/how-do-i-upgrade-from-Office-2003-to-Office-2010/0eded1e3-7a6c-E011-8dfc-68b599b31bf5

  I hope this helps.