Using request/response patterns to the WLI process

Similar Questions

• Download CS6 Master Collection using request / response code - is legitimate?

  I bought a copy of Adobe CS6 Master Collection download and wonder now if it is legitimate. It's instructions go like that.

  1. Download from mediafire.com, what is called "Adobe CS6 license PREACTIVATION.rar"
  2. Unzip and run "Adobe CS6 license PREACTIVATION.exe"
  3. Connect on Adobe.com and sign in with the user [email protected] ID and password included in the purchase
  4. Go to the product download CS6
  5. Download the two files for CS6
  6. Run the smaller of the two files to the collection facility
  7. When asked for a serial number enter "1325-xxxx-xxxx-xxxx-xxxx-3266" (of course the s 'x' were the numbers)
  8. A dialog box appears during installation with a links saying "click later and install CS6. Select it
  9. Complete the installation
  10. Start Photoshop
  11. A dialog box saying "Having problems connecting to the Internet" appears. Click the 'Generate the Code request' activation offline
  12. Take the generated application code and send it to an address of mail in Turkey.
  13. The address of e-mail in Turkey will respond with the response code that I could then get into Photoshop

  This is not legitimate or have I been scammed?

  I asked the Turkish user a few questions.

  1. Can it be installed on two computers which I think is common for such Adobe products? Answer: No.
  2. Assuming that the answer was Yes, should I use this method of response for each installation code? Answer: Yes
  3. Can CS6 be moved to a new computer in the future? Answer: Should use the method of response code
  4. After activation successful using the response code, Belarc Advisor scored a different serial number. Can I use this number and work around the stuff of response code? Answer: No.

  Thank you, Brian
  

  Nothing of what you describe seems legitimate to me... but I'm just another user like you (although I buy Adobe's Adobe products).

• The use of bind variables in the application process

  Bind variables refer to elements of session state supported in queries in an application request process?
  
  All the examples I see show how to pass client side values using the $v () function and the htmldb_get object addParam method and refer to them using the wwv_flow.g_xNN variables, but already available in session state values, I should be able to use them directly in the process, right?
  
  Thank you

  Yes, they are supported.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Delete form for the child process data

  Hello
  
  I have a form of child process for my multivalue attributes. I would like to delete one or more entries from the shape of child process via the API data, but the only API that I found was removeProcessFormChildData. But I guess this method deletes all data in the form of child process. Is there an other API I can use? How to remove the child process form data?
  
  Thank you
  PETREA

  See this thread for an example of code:

  Re: How to remove the child form data table

  For more examples, just look for the api and you should be able to present to a code example.

  -Kevin

• is it possible to use the ROWNUM in the request/response

  Hi, is it possible to use the ROWNUM in the request / response.
  
  for example, in the "Advanced SQL filter '. Thank you!

  Hello

  Using RCOUNT (1) and try...

• Providing the address of the variable response to the Notification Service to the BPEL process

  Hi all

  I use the Notification Service in my BPEL process to send e-mails. The sender of the email (or reply address) is variable and is passed in the BPEL process. I can't get the email to be sent to the reply address that is passed in. I tried to assign both ReplyToAddress and FromAccountName, but the only address that is used is one that has been set up as the account (as described in the present document Oracle 11 g Release 1 (11.1.1.6.1) and the configuration of the Human Workflow Services components - Motors). I tried the following, but to no avail:

  <assign name="AssignEmailParams">
       <copy>
            <from>'Default'</from>
            <to>$sendEmailRequest.EmailPayload/ns1:FromAccountName</to>
        </copy>
         <copy>
             <from>$inputVariable.payload/client:from</from>
             <to>$sendEmailRequest.EmailPayload/ns1:ReplyToAddress</to>
          </copy>
           ...
  </assign>
  

  <assign name="AssignEmailParams">
       <copy>
            <from>$inputVariable.payload/client:from</from>
            <to>$sendEmailRequest.EmailPayload/ns1:FromAccountName</to>
        </copy>
           ...
  </assign>
  

  Am I missing something? Any help would be greatly appreciated.

  I use JDeveloper 11.1.1.7.

  Thank you

  Bill

  Hi Bill,

  I know the sender and answering addresses can be configured on the properties of Human Workflow notification (check link below)... But I don't know if a sender/dynamic response is supported, you may use the e-mail rather than the notification one activity...

  http://docs.Oracle.com/CD/E28280_01/admin.1111/e10226/hwf_config.htm#BHCJDGFJ

  See you soon,.

  Vlad

• How can I register my product without using the online process?

  How can I register my product without using the online process?

  He scored finally got.

• Passing parameters to the URL - availability in the new process of request

  Hello

  I am able to pass parameters in the URL of the APEX that defined the points of the application as below

  : http://application-tier server: port/pls/apexdev/f? p = 1001:1:APP_CLIENT_NUMBER, APPLICATION_NUMBER:0001285, 0000051:

  I would like to get and set other items based on elements of application passed as parameters. I would like to only enter once application.

  I found the best place for this action in a process of application with Point on new Instance of Process.

  The problem seems to be that the value of point of application has not been set at this point, and therefore the values are null.

  If I change the application process process Point to something that runs to each page as On Load: after the header, then the values are available. It is not suitable as only wish to run once at startup of the application.

  I can't find discussion of this documentation.

  1. I would be able to access URL parameters in the application process with Point on a new Instance of the process?

  2. are there any other equivalent task for access to URL parameters at the start of the application?

  Thank you

  Hello

  APEX runs only on the new process Instance when a new session has been set up. As you discovered, URL items are not yet saved in session at this point State. You can use a level app process before header instead, with a condition that makes that make it run when certain elements that you want to initialize are null.

  Kind regards

  Christian

• Pacing the learner on a 1 blade to use their responses on the other.

  Another day an another newbie question by me... I'm sorry.

  I want to create a slide where I ask the questions of the learner.

  It s a mixture of numbers input boxes and choice of selection of the option button.

  The result (collected through variables) should be used on the next slide.

  for example

  -Type 1: ' _ how do you _? (the user enters number to be used a variable)

  Question: Can I limit the number entered somehow?
  For example, any number greater than _ shows message "are you sure? This seems very high"and such.

  -Type 2: "rather choose _ or _?

  Question:

  I thought that I would use radio buttons to compile the answers.

  Let´s then I have 2 responses to the choice.

  If I understand the selection of an option button will change a variable I can set.

  But how do I get the response that has been chosen to appear on the next slide?

  For example Radio button answer 1: 'X it s' is like that on the next slide

  In other words, how the selection button to determine the var?

  By pressing the #1 button-> var value = "1"?

  Or press the button #1-> var value = "label as in the question?

  I guess that the answers are really simple, but thanks for any suspicion runs...

  I think these two blog posts to help you:

  Advice - Training interaction - Captivate blog

  Using Captivate Widgets? A few tips - Captivate blog

  They explain how to use variables for these interactions (widgets) that have an associated variable.

  Once a variable is filled you can use it anywhere in a text (legend or form) container by inserting it with the X button in the role of composition of this container of text properties panel

  For TEB: click on the button 'More options' and you can set that the BER should accept the numbers, and what is the maximum length:

  

• Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start texxto tool says the following error message: could not complete your request because something prevented the text engine has been started.

  Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start the text tool says the following error: could not complete your request because something prevented the text engine has been started.

  Go through the Troubleshooting Guide to solve this problem

  Troubleshoot fonts | Photoshop CS6 2014 CC, CC, CS5

  Error text engine using the type tool in Photoshop CC | Windows 8

• I still can't install creative cloud desktop app on my mac running Yosemite it will download the dmg but will stop the installation process at halfway through the status bar displays installation then disappears to the halfway point - I used the creative

  I still can't install desktop application creative cloud on my mac running Yosemite 10.10.1 it will download the dmg but will stop the installation process at halfway through the status bar displays installation then disappears to the halfway point - I used the creative cloud cleanser and tried to install it as a new user admin does not work - I was able to install the desktop application creative cloud on my Mac pro that uses OS X 10.9.5 (and will install Creative cloud apps) two machines have similar programs.

  Hi Steven,

  Please refer to the threads below where this issue has been addressed:

  installer of creative cloud disappears

  Re: Installer of Creative cloud disappears during installation

  Kind regards

  Sheena

• How to set the value of the point of application using pl/sql in the application process

  Hi guys,.

  I want a global variable (application point) whose value will be set to start when a user logs on to the application. The value will be retrieved from the database by using a sql query. I don't exactly know the syntax to set the value of the point of application in the application process. Also, I want to know what type of enforcement process should I use to set the value of the point of application, when a user starts a session. The value of the point of application varies from one user to the user.

  Help, please.

  I use apex 4.2

  Kind regards

  Waqas

  You can use the application element as a link with his name. That is to say. your point of application is named G_MY_APPLICATION_ITEM, then you can / set of access using: G_MY_APPLICATION_ITEM.

  For example

  BEGIN

  -assign as a variable

  : G_MY_APPLICATION_ITEM: = 'LARRY ';

  --

  -use in a SQL statement

  SELECT WHATEVER_COLUMN

  IN: G_MY_APPLICATION_ITEM

  FROM MY_TABLE

  WHERE USERNAME =: APP_USER

  ;

  END;

  Peter

• CPU used by the oracle process

  Hello
  10 g R2 on AIX 1.6 How to see the CPU used by the Oracle process?
  
  Thank you.

  By process, you can use:

  You can use the command topas or svmon - G

  By Session

  use of v$ Session

• What views of $ v can I use to monitor the parallel process?

  Hi all
  
  The version of DB is 11.1.
  
  I ran a sql in parallel. And I got the SessionID for the session.
  
  But when I referred to v$ px_session, v$ px_process or sql_monitor $ v even with this session id, I have nothing from these points of view.
  
  The exectuion plan showed that it used parallel exectuion.
  
  Could someone tell me what is the problem with my approach? Or it means that my sql has not used the parallel at all?
  
  Best regards
  Leon

  PARALLEL_MAX_SERVERS to 0 for the database instance. Confirm that there are no PX processes running on the instance of database (these would be process "ora_p0xx_SID", where xx is 00 to 99 (or 128)) on the server.

  Then set PARALLEL_MAX_SERVERS to 8 or 16 or more.

  Run your query/dml.

  Now, see if the ora_p0xx_SID process has created.

  Hemant K Collette

• By using Cfthread to separate the page processing intensive tasks

  Hello

  I have what I think, it's a pretty simple distinction must be fairly intensive standard page processing code. It's under CF8.

  We have a page that does a lot of outcome investigating tens of thousands of records. It is used very rarely and only by one or two people, but our server is not really equipped to do this kind of thing very quickly.

  The consequence is that all of the intensive process can push the loading of the page about 120 seconds. That's fine, because everyone knows what is happening and why, but I would like to see sort of "Please wait" message and load all the layout is not just «wait my.web.site...» "in their browser.

  I put code in a cfthread supercomputers article, and that seemed to do what I want, finally, with regard to the rest of the page load first. The problem is that the outputs nothing - thread about what is covered in the thread gets displayed on the page.

  It's the first time I used CFTHREAD, and I understand conceptually from a data processing perspective (for example, the examples given in the documentation when you make asynchronous as tasks download something or by entering an external RSS feed). I don't know how it relates to the processing of the page. In other words, it seems to me that I'm either something simple incorrectly, or well CFTHREAD can not be used in this way.

  Thank you very much

  AQ

  You must control the flow of thread, for example, like this:

  TestPage.cfm

  ============