Pacing the learner on a 1 blade to use their responses on the other.

Similar Questions

• My iPhone and iPad are not visible to my Macbook Pro in parachuting, but they are visible to the other... How can I solve this problem?

  How can I fix?  iPhone and iPad are visible to each other in parachute drop but they does not see my Macbook Pro.

  Greetings brsm1990,

  Thank you for using communities Support from Apple!

  I understand that your iOS devices can see each other with the help of parachuting, but your Mac does not see them. To begin troubleshooting, I suggest you read the information in the following article.

  Use AirDrop to send the contents of your Mac - Apple Support

  Tips for sending items

  If you do not see the recipient in the AirDrop window or sheet:

  • Make sure that the two devices have on AirDrop and are less than 30 feet (9 meters) on the other.
  • If you send to an iPhone, iPad or iPod touch:
    • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
    • The iOS device must use iOS 7 or later and have Personal Hotspot disabled in settings > cellular.
  • If you send a Mac:
    • If the receiver Mac uses OS X Mavericks, Cougar or Lion, then open a window AirDrop: choose go > AirDrop in the menu in the Finder bar.
    • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."
    • Know if the Mac has "block all incoming connections" enabled in the security and privacy preferences. A Mac does not receive items using AirDrop if this setting is enabled.
  • If AirDrop on the receiving device is set up to receive points of contacts only, make sure that the two devices are connected to iCloud. Also make sure the associated e-mail address or phone number to your identifier Apple is in the Contacts application on the receiving device.

  

  Release system requirements

  Send items to an iPhone, iPad or iPod touch, or to receive these devices, you need a 2012 model or later Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  To send items to another Mac, you must:

  • MacBook Pro (Late 2008) or later, excluding the MacBook Pro (17 inch, late 2008)
  • MacBook Air (late 2010) or later version
  • MacBook (Late 2008) or later, excluding the white MacBook (Late 2008)
  • iMac (early 2009) or later version
  • Mac Mini (mid-2010) or later version
  • Mac Pro (early 2009 with AirPort Extreme card or mid-2010)

  Learn how to identify your model of MacBook, MacBook Pro, MacBook Air, iMac, Mac minior Mac Pro.

  I know you said that your Mac does not see your iOS devices, but your iOS devices sees the Mac?

  Best!

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Have two networks. One is 'working '. The other is the "homegroup". 'work' to the internet. "residential"local group. IE cannot access the internet. Help

  So here's my problem:

  It is a routing problem.  In short, it comes down to how to get IE (or any application) to use a specific WiFi adapter with Internet and ignore the adapter WiFi that goes to a network is private with no internet.

  This is the situation and what I tried.   No joy.

  PC hardware:

  primePC = Win7-Pro with two WiFi.   WiFi-Internet and WiFi-Local-premium

  tabletPC = Win10-Home with a (currently) WiFi-Local-Tablet (not internet from now).

  Use the Description of PC hardware

  primePC is my laptop that I use for work and all the rest.  It goes where I go.

  Tablet PC is in my mobile office and stay in the van (office) when I'm on-site customer.  I use it for

  things like control my monitors in the van (office).

  Network:

  WiFi-Internet (primePC) is connected Internet router to the Internet.

  WiFi-Local (primePC) is connected via the Local router

  WiFi-Tablet (Tablet PC) is connected via the Local router

  Objective:

  WiFi-Local allows you to share files and use VNC for remote desktop.  (Win10-Home support not native RDP).

  Use wireless Internet to connect primePC Apps IE for example to the internet via WiFi-Internet connected to the Internet router.

  A photo is included.

  

  THE PROBLEM:

  Because primePC has WiFi-Internet and WiFi-Local, applications such as IE are getting confused.

  How can I say (other applications) to use wireless Internet for internet connection?

  What I tried:

  Have you tried ForceBindIP on Win7, but is no longer works.  I'm sure that at some point, it has worked.

  Even if I could make it work, I don't really like it.   There *.   I don't want to link to an IP address.  I want to

  link to a Mac address is the Mac of the WiFi-Internet address.

  Other Options:

  Soft router (ugly) There must be something that can do this.  But I have not found one.  I guess it's a kind of soft router.

  Firewall, routing (still ugly)

  I have a firewall (on average by the way).   Creating a routing table in AVG is not good for the following reason.

  The entire Setup is mobile.    WiFi Internet is constantly connected to different internet routers, so learning new IP address that I have no control over.

  Future:

  Currently, the problem is on the primePC.   But in the end, I have also a problem similar with tabletPC, since the tabletPC is going to have a 3G connection / 4G to the internet.  This connection will go up and down based on (A) if I have internet with WiFi-Internet-router or not.   Using a hub of 3G / 4G for private network will not be good option because (A) the security because it allows access to my tablet, another security van mobile devices (B) cost of using a mobile router WiFi "hot spot" vs just to have two phone lines, both have unlimited data service of attachment (not unlimited hotspot service).

  Hello

  According to the description, I understand that you have a routing problem, you try to get IE to use a specific WIFI adapter with the internet, while ignoring the other WIFI adapter that goes to a private network.

  It is not possible to connect two computer to the same WIFI cards. You must unmark a WIFI to use the other WIFI adapter.

  You can search using your search engine to find any third party software which may help you.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  your computer is connected to a network domain?

  If your computer is connected to the domain network, then I would recommend to post your query on TechNet Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful.

• Show the files to the top two places and I cannot delete one without deleting the other

  Hello

  I'm trying to clean up a laptop computer slow execution that is running Windows 7. I transferred a bunch of photo files of my image on an external hard drive folder and then deleted all the photos from my hard drive. Everything seemed to be going great. Then I noticed a bunch of files in my photo folder that shouldn't be there. One was a big file I have on my desk. I deleted it from the photo folder is not there, but it is also removed from my office. I restored the file from the Recycle Bin, and it restored in two places.

  For some reason, several files from other regions (such as the office and downloads) are also appear in my pictures folder. I thought that they were just copies, but they must be the same files just somehow in two places at once, since each copy deletes when I delete one. How to disassociate the and get rid of the excess files?

  I tried to find the answer with a Google search, and I learned that it is not the best idea to save documents and folders on the desktop. I will do that more. But how to untie all of these files so I can delete one and not the other?

  Thanks a lot for your suggestions!

  Jen

  Look carefully at what you use.  The library is entirely different from the image in folder.  The library is just a quick way to see several places at the same time (nothing can ever be "stored" within a library).

  Exercise: Right click in your image library and choose "Properties".  Here you will see all the places that will appear in the display of image library.  You probably, some places are represented in this library that are not intended to be.  No problem, you can remove them from the list.

  Remember that the library is showing a simple view combined all these places you.  The files are always stored in original places and when you remove the library view, you delete the original.

• I can connect to my home network, but all the other networks do not work...

  I can connect to my home network, but all the other networks do not work... Error window says:

  Windows could not connect to the (X)? network name?

  [Link] Solve problems

  [Link] Learn more about Internet connection problems

  I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

  Windows 7

  Hello

   
  1. What network are you trying to connect to?
  2. You are not able to connect to the Internet?
  3. Are you able to connect to the other network with wired network?
   
  Try the methods provided and check.
   
  Method 1:
  Check out the link and follow the steps.
  What is network discovery?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
   
  Method 2:
  Check out the link and run the troubleshooter.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reset the TCP/IP and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
   
  Method 4:
  Check out the links and check out them.
  http://Windows.Microsoft.com/is-is/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/is-is/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• How can I get lines to work alongside the other instead of below each other

  Hi, I am a complete novice with limited technical capacity and try to learn the bootstrap, I want a provision which consists of a large image or movie to the left of the page and a few rows of images in front of the right. Is it possible to put the lines next to each other instead of below the other? I have sort of this successful using the tag ASIDE on a line, but am unsure if this will cause problems when the site is published. Also is it possible to place an image or a text on the greyed out the column when he has been compensated? Any help would be received with gratitude by the beginner difficulty

  If you are a perfect beginner with limited technical capacity, Bootstrap is not a good place to start. To work properly with Bootstrap, you need a pretty good knowledge of HTML and CSS.

  That said, to answer your questions:

  • No, you cannot "bootstrap" rows side by side. The question of a line, it's that it spans the entire width of its container. However, you can nest rows within a column. You can do one of the reasons are a top element on one side of the page with two or more lines of smaller elements on the right.
  • No, you can't put anything into space alongside a column that was offset. The idea of compensation is to leave space on the left flank.

  If you have a subscription to lynda.com, you can learn much more about the use of bootstrap in Dreamweaver CM³. I have published a course called Responsive Design with Bootstrap and Dreamweaver CC 2015. It is not free, but you can get a free 10-day trial (free trial version does not include the sample files).

• HTML5 animation always appears on the other contained

  I've created an animation on board animate and imported into Captivate 8. I tried to put on a blade of mater and directly on a slide in the Filmstrip. It always jumps on top of the other content of the slide when I saw in a browser, even if it is on the bottom of the stacking order in the layers on a slide in the Filmstrip. If I place it on a slide master, the same problem occurs, even though I have the "Master drag objects On Top" unchecked.

  Why? Is there any solution for this?

  This has always been the case for all animations, they are on top of the stack (ditto for the interactions of training). Sorry, it's the 'design', I can't offer you a work around.

  As for edge to animate, you can use transparency to at least have the transparent background.

• Newbie here... Put two side by side logo and one caption under the other

  Hello

  It has been a few days learn how to buid a site using css. I want to add two logos (png format) in my header div side by side and add a caption under the second logo located on the right and also I would like to place the second bit of lower than the first logo logo.

  This is the style of the #header div I created

  #header {}

  Width: 980px;

  height: 181px;

  margin: 0 auto;

  margin-left: 20px;

  padding-left: 15px;

  background: url(images/img02.jpg) no-repeat left top;

  }

  Here, I have created two more div for two logos and what on the legend.

  I want the result something like this

  Use text-align center:

  #logoRight p {}

  text-align: center;

  }

• How to start to let the other post from people on my site?

  Hello, I'm pretty new to dreamweaver. I worked on one we

  site for about 9 months now ya did know a little of my knowledge

  with the program.

  I want to be able to allow others who come to my site to post there own comments, thoughts and images or what ever. but I don't know where to even start.

  can someone point me in the right direction or possibly show me the basics of what I need to do to make this happen?

  I suppose I could add a bit more to it: Let's see, my name is chris and I thank you for your help... If you have good advice and I would like to help a web developer new patient and dertmined, you can contact me via yahoo messenger or email. my yahoo id is be_direct2002 and my email is [email protected].

  Once again thanks for your help.

  BTW im do not yet know with mysql or php or having my own server, but im in the chomping little to get to this point.

  IM currently using Global Domains International as my host. Honestly I don't know if they place restrictions on what you can do, or if there is even a restriction that prevents using things such as php, etc. I ftp through dreamweaver all my sites files, so I do all the codeing handmade by dreamweaver, blah enough tidious. but I prefer to enjoy the work... Should have gone to school for this instead of all the other nonsense that I jumped around through.

  Learning fast but behind on all the jargon, HELP Please, me lov you long LOL thanks again!

  Post edited by: Melchisedec1980

  I'm here seven days a week, lately. PM me if you need.

• SWF is MIA on a field, but not the other?

  I have a modest Web page which I use primarily to set up the occasional photograph of the family:
  
  http://www.staggclan.com
  
  .. .and that contains a Flash xreferencing file a Flash video. That's what it is supposed to look like: http://www.dfwaug.net/test/index.html.
  
  As you can see - the video works very well in this last example (it's the same hierarchy). But why don't you see the video on my site? You can take a look at the source for staggclan.com on this page and you can see that I'm NOT xreferencing my hard drive and I am referencing an image that has not been downloaded (although I was - you would see at least one indicator 'broken image'). It does not even include space for where this video should be - it's as if he was not yet placed there.
  
  For the life of me I don't know what the problem is. Why is - that will work in a field, but not the other (both hosted by 1 & 1. com)? One who can correctly solve this problem for me will find me ETERNALLY THANKFUL.
  
  All the best.
  
  

  I'm just using DW8 to insert this .swf on a page. Obviously, I had deleted by mistake the "Scripts" folder is published with the course when I put on my server - so - no multimedia.

  Its a long time I have been using DW since now, we mainly use eLearning software rapid development. Gawd how I miss DW. Fortunately, I get to 'play' with it from time to time on the home front and have since updated my 'official' home-homepage which is now showing the video correctly:

  www.staggclan.com

  It was certainly a learning experience...

  Kevin

• When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  Try switching your Notes on / off under settings > iCloud or maybe restart the device-restart your iPhone, iPad or iPod touch - Apple Support to see if this could solve the problem.

• There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  There should be a limitation or personal parental control on hotspot. Children feel obliged to allow their friends to use their hotspot. And the parents who pay for it!

  This is a user to user support forum, so there is really nothing anyone here can do for you, I'm afraid.

  However, you can send your comments Apple

  http://www.Apple.com/feedback/

• 10.11.6 - now see the other computer's browser activity

  After updating to 10.11.6, I get an icon in my dock showing me the activity of the browser on the other Mac on our network and vice versa. No matter if they use Chrome or Safari, I still don't what site they are on and they can see Web sites that I visit. He appears as an extra icon to the left of the dock. How to disable this option?

  Looks like you may have turned on screen sharing:

  OS X Yosemite: share your screen using Back to My Mac

  (written to Yosemite, but always the same on El Capitan)

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.